Type X and Ex pxb purge and pressurization control unit 6000 Control System
- Certified for Class I, Class II, Division I; Zone 1 / Zone 21 to nonhazardous
- Intrinsically safe electrical/pneumatic manifold assembly
- Intrinsically safe user interface for programming and monitoring the system
- Enclosure volume up to 450 ft3 (12.7 m3)
- Control Unit monitors system operation and controls enclosure power
- Universal mounting (brackets included)
- 316L stainless steel Type 4X enclosure
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of 6000 Control System
| Product Description |
|---|
| 6000 Series Type X and Ex pxb purge and pressurization system control unit |
| General specifications | ||
|---|---|---|
| Operating mode | manual, semi-automatic, or fully automatic - programmable | |
| Series | 6000 Series | |
| System | Type X Purge ; Ex pxb Purge | |
| Number of volume exchanges | 4 to 19 | |
| Hazardous environment | gas, dust, gas and dust | |
| Supply | ||
| Rated voltage | 90 ... 264 V AC, 48 ... 62 Hz / 0.2 A 20 ... 30 V DC |
|
| Electrical specifications | ||
| Connection | Terminal blocks | |
| Input | ||
| Input I | Inputs 1, 2, 3, 4: contact input, 5 VDC @ 2 mA | |
| Input type | intrinsically safe | |
| Input II | Temperature inputs | |
| Input type | intrinsically safe | |
| Sensor type | 6000-TEMP | |
| Input III | EPV-6000 Vent | |
| Input type | intrinsically safe | |
| Input IV | User interface module | |
| Connection | M8 connector, 4-pin | |
| Input type | intrinsically safe | |
| Output | ||
| Output I | AUX 1 | |
| Output type | Dry contacts, SPDT | |
| Inrush current | 5 A | |
| Contact loading | 2 A @ 240 VAC resistive load 2 A @ 24 VDC |
|
| Output II | AUX 2 | |
| Output type | Dry contacts, SPDT | |
| Inrush current | 5 A | |
| Contact loading | 2 A @ 240 VAC resistive load 2 A @ 24 VDC |
|
| Output III | ENC_1, ENC_2 (protected enclosure contacts) | |
| Output type | Dry contacts (2) SPST, NO | |
| Contact loading | 8 A @ 240 VAC / 120 VAC resistive load 8 A @ 24 VDC |
|
| Indicators/settings | ||
| LED indication | Safe pressure: Blue - safe pressure is achieved Enclosure power: Green - power on; Red - power off Rapid exchange: Blue - purging is running System bypass: Yellow - bypass is activated Alarm fault: Red (blinking) - any alarm input detected; Red (solid) - 6000 series system fault |
|
| Pneumatic parameters | ||
| Protective gas supply | instrument grade air or inert gas | |
| Pressure requirement | 20 ... 120 psig (1.4 ... 8.3 bar) (138 ... 827 kPa) regulated | |
| Safe pressure | Gas: 0.25" wc (6.4 mm wc) (0.625 mbar) (62 Pa) Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) (162 Pa) Gas and Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) ( 162 Pa) |
|
| Purge flow rate | Maximum flow rate measurement for enclosure size (enclosure volume:flow rate): < 20 ft3 (0.57 m3): 5, 12 SCFM (141, 340 l/min), or dynamic 20 ... 30 ft3 (0.57 ... 0.85 m3): 5, 12, 20 SCFM (141, 340, 565 l/min), or dynamic > 30 ft3 (0.85 m3): 5, 12, 20, 30 SCFM (141, 340, 565, 850 l/min), or dynamic |
|
| Purge flow and enclosure pressure rate | With EPV-6000-xx-01, EPV-6000-xx-02 5 SCFM @ 1.5" wc, (141 l/min @ 3.7 mbar) 12 SCFM @ 2.0" wc, (340 l/min @ 5.0 mbar) 20 SCFM @ 2.7" wc, (565 l/min @ 6.7 mbar) 30 SCFM @ 4.1" wc, (850 l/min @ 10.2 mbar) With EPV-6000-xx-03, EPV-6000-xx-04 5 SCFM @ 2.1" wc, (141 l/min @ 5.2 mbar) 12 SCFM @ 2.6" wc, (340 l/min @ 6.5 mbar) 20 SCFM @ 4.1" wc, (565 l/min @ 10.2 mbar) 30 SCFM @ 5.3" wc, (850 l/min @ 13.2 mbar) With EPV-6000-xx-05, 06 5 SCFM @ 1.8" wc, (141 l/min @ 4.5 mbar) 12 SCFM @ 2.9" wc, (340 l/min @ 7.3 mbar) 20 SCFM @ 7.4" wc, (565 l/min @ 18.5 mbar) |
|
| Flow rate for leakage compensation | Depends on enclosure seal. With EPV-6000-xx-01, EPV-6000-xx-02 0.35 SCFM @ 0.25" wc (10.0 l/min @ 6.3 mbar) 1.0 SCFM @ 0.75" wc (28.0 l/min @ 1.9 mbar) With EPV-6000-xx-03, EPV-6000-xx-04 0.22 SCFM @ 0.25" wc (6.2 l/min @ 6.3 mbar) 0.58 SCFM @ 0.75" wc (16.4 l/min @ 1.9 mbar) With EPV-6000-xx-05, EPV-6000-xx-06 0.15 SCFM @ 0.25" wc (4.2 l/min @ 6.3 mbar) 0.35 SCFM @ 0.75" wc (10.0 l/min @ 1.9 mbar) |
|
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 80 °C (-22 ... 176 °F) | |
| Relative humidity | 5 ... 95 %, noncondensing | |
| Vibration resistance | 5 ... 100 Hz , 1 g, 12 m/s2, all axes | |
| Impact resistance | 30 g, 11 ms, all axes | |
| Mechanical specifications | ||
| Connection type | Pneumatic : Inlet fitting to manifold: 3/8" ferrule fitting Outlet fitting from manifold: 3/8" ferrule fitting Inlet fitting to enclosure: 3/8" bulkhead fitting |
|
| Cable gland | 4 - M16 x 1.5 cable gland | |
| Degree of protection | Type 4X , IP66 | |
| Material | Enclosure: 316L (UNS S31603) stainless steel Manifold valve: anodized 6082 aluminum Fittings: 316L (UNS S31603) stainless steel |
|
| Mass | -WH- 11.4 kg (25 lb) -CK- 7.2 kg (16 lb) |
|
| Dimensions | 183 x 367.5 x 152.5 mm (7.20 x 14.45 x 6.00 inch) | |
| Height | 367.5 mm | |
| Width | 183 mm | |
| Depth | 152.5 mm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | ||
| Marking | 6000 main control unit with housing 6000-xx-S2-UN-xx-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex db ib [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) II 2 D Ex ib tb [ib Db] [pxb Db] IIIC T60°C Db (-20 °C ≤ Ta ≤ 50 °C) 6000 main control unit kit version 6000-xx-S2-UN-CK-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex db [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) II 2 D Ex tb [ib Db] [pxb Db] IIIC T80°C Db (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex ib [pxb Gb] IIC T4 Gb |
|
| Directive conformity | ||
| Directive 2014/34/EU | IEC/EN 60079-0 IEC/EN 60079-1 IEC/EN 60079-2 IEC/EN 60079-11 IEC/EN 60079-31 |
|
| Directive 94/9/EC | ||
| International approvals | ||
| UL approval | 6000 Main control unit with housing 6000-xx-S2-UN-xx-xx: cULus Class I, Division 1, Groups A,B,C,D T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Division 1, Groups E,F,G T4 (-20 °C ≤ Ta ≤ 50 °C) Class I, Zone 1, Group IIC T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Zone 21, Group IIIC T60 °C (-20 °C ≤ Ta ≤ 50 °C) [Ex i] Associated Equipment Ex db ib [ib Gb] [pxb Gb] IIC T4 (-20 °C ≤ Ta ≤ 60 °C) Ex ib tb [ib Db] [pxb Db] IIIC T4 (-20 °C ≤ Ta ≤ 50 °C) 6000 Main control unit kit version 6000-xx-S2-UN-CK-xx: cULus Class I, Division 1, Groups A,B,C,D T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Division 1, Groups E,F,G T4 (-20 °C ≤ Ta ≤ 60 °C) Class I, Zone 1, Group IIC T4 Class II, Zone 21, Group IIIC T60 °C [Ex i] Associated Equipment Ex db [ib Gb] [pxb Gb] IIC T4 X (-20 °C ≤ Ta ≤ 60 °C) Ex tb [ib Db] [pxb Db] IIIC T4 X (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: cULus (-20 °C ≤ Ta ≤ 60 °C) Class I, Division 1, Groups A,B,C,D T4 Class I, Zone 1, Group IIC T4 Ex i Intrinsically safe |
|
| IECEx approval | 6000 Main Control unit with housing 6000-xx-S2-UN-xx-xx: IECEx UL 08.0003X Ex db ib [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) Ex ib tb [ib Db] [pxb Db] IIIC T60 °C Db (-20 °C ≤ Ta ≤ 50 °C) 6000 Main control unit kit version 6000-xx-S2-UN-CK-xx: IECEx UL 08.0003X Ex db [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) Ex tb [ib Db] [pxb Db] IIIC T80 °C Db (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: IECEx UL 08.0003X Ex ib [pxb Gb] IIC T4 Gb |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180508 |
| ECLASS 12.0 | 27180508 |
| ECLASS 11.0 | 27180508 |
| ECLASS 10.0.1 | 27180508 |
| ECLASS 9.0 | 27180508 |
| ECLASS 8.0 | 27180508 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121301 |
Details: 6000 Control System
Function
The 6000 series consists of the control unit (EPCU)and user interface(UIC) mounted in a 316L stainless steel Type 4X (IP66) enclosure with the pneumatic solenoid valve mounted on the unit. The EPV-6000 relief vent is separate and is mounted to the enclosure.
The user interface allows programming of up to 4 switch inputs, temperature modules, enclosure power contacts, 2 auxiliary outputs, and various operational functions. Also, the user interface screen allows monitoring and easy configuration.
Among the additional features are inputs for system bypass, enclosure power on/off, temperature overload and activation of Rapid Exchange flow for cooling or auxiliary relay for separate cooling source, and delay power shutdown.
Component kits are available for custom installations.
Informative Literature: 6000 Control System
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: 6000 Control System
| Product information | Language | File Type | File Size |
|---|---|---|---|
| Basic Explosion Protection Compendium - Type of Protection "Purge and Pressurization" | ENG | 3860 KB | |
| Brief Instructions | |||
| Programming Tree 6000 Series Purge/Pressurization System | ENG | 1157 KB | |
| Programming Worksheet 6000 Series Purge/Pressurization System | ENG | 1399 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 174 KB | |
| Manuals | |||
| Manual | ENG | 10850 KB | |
Design / Simulation: 6000 Control System
| CAD | Language | File Type | File Size |
|---|---|---|---|
| 2D / DXF Files for 6000 Series component kit / CAD 2-D | ALL | ZIP | 1162 KB |
| CAD and STP drawings of 6000 Series complete unit / CAD 2-D | ALL | ZIP | 6729 KB |
Approvals: 6000 Control System
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| ATEX Certificate | DEMKO 07 ATEX 0705753X | ALL | 360 KB | |
| China SITIIAS CCC Ex Certificate | 2020322304003056 (Katy, TX USA) | ALL | 5433 KB | |
| IECEx Certificate of Conformity | IECEx UL 08.0003X | ALL | LINK | --- |
| Korea KOSHA | 14-AV4BO-0083 | ALL | 322 KB | |
| PESO (India) CCOE | A/P/HQ/MH/104/4757 (P383926) | ALL | 103 KB | |
| UL Hazardous Location | E184741 (RFPW, RFPW7 , RFPZ7) | ALL | 741 KB | |
| Control Drawings | ||||
| Control drawing UL / Control drawing UL | ALL | 711 KB | ||
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B066D | ALL | 162 KB | |
Associated Products: 6000 Control System
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!
Our interactive app gives you a step-by-step programming simulation for your purge and pressurization system. Download the free-of-charge app for iOS or Android devices now …
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.