Timer, Counter, Tachometer KC-LCDC-48-2R-230VAC
- Counter/Timer/Tachometer
- Adding/subtracting via 2 separate inputs
- Batch controller with 2 pre-selections
- Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs
- Multicolor display
- Display range and preselection range from -999999 up to 999999
Overflow will be evaluated correctly up to 1 decade - PNP and NPN sensors can be connected
- Degree of protection IP65 (front only)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of KC-LCDC-48-2R-230VAC
| Product Description |
|---|
| LCD batch controller with 2 relay outputs and 90 ... 260 VAC supply voltage |
| General specifications | ||
|---|---|---|
| Pre-selection | 2-fold | |
| Data storage | > 10 years, EEPROM | |
| Programming | keypad-driven menu | |
| Indicators/operating means | ||
| Type | 2-line, 2 x 6-digit LC display with leading sign Multicolor, backlit |
|
| Display value | digit height 9 mm | |
| Pre-selection | digit height 7 mm | |
| Key interlock | via "high" potential at "LOCK" input | |
| Decimal point | 0 to max 5 fractional digits | |
| Scale factor | 0.0001 ... 99.9999 | |
| Reset | manually or external | |
| Electrical specifications | ||
| Fusing | 90 … 260 V AC: T 0.1 A | |
| Operating voltage | 90 ... 260 V AC | |
| Power consumption | max. 8 VA | |
| Input | ||
| Connection | Counter inputs: A and B Control/reset inputs: LOCK, RESET, GATE, MPI |
|
| Signal voltage | ||
| High | 12 ... 30 V DC | |
| Low | 0 ... 4 V DC | |
| Counting frequency | 30 Hz / 55 kHz | |
| Minimum pulse duration | Control/reset inputs: 10 ms / 1 ms | |
| Impedance | 5 kOhm | |
| Count modes | ||
| Pulse counter | Counting with counting direction (cnt.dir), difference counting (up.dn), up/down counting (quad), Cumulative counting (up.up), up/down counting x 2 (quad 2), up/down counting x 4 (quad 4), additional functions for counter input A and counter input B: |
|
| Frequency counter | functions for input A and input B: |
|
| Timer | Time measurement via GATE input (FrErun), counter input A: Start, counter input B: Stop (InpA.InpB.), counter input B: Start/Stop (InpB.InpB.), time measuring via RESET input (auto) |
|
| Output | ||
| Relay | changeover contact , Make contact | |
| Switching voltage | max. 250 V AC / 110 V DC | |
| Switching current | max. 3 A AC/DC, min. 30 mA DC, | |
| Switching power | max. 750 VA / 90 W | |
| Sensor supply | 20.4 ... 27.6 V DC, max. 80 mA |
|
| Output I | Relay with make contact, NC or NO progr. | |
| Mechanical life | 2 x 107 switching cycles | |
| Electrical life | 1 x 105 switching cycles at 3 A | |
| Output II | Relay with changeover contact | |
| Mechanical life | 2 x 107 switching cycles | |
| Electrical life | 5 x 104 cycles at 3 A | |
| Response time | Relay: approx. 7 ms Frequency counter: 100/600 ms |
|
| Compliance with standards and directives | ||
| Directive conformity | ||
| Low Voltage Directive 2006/95/EC | EN 61010-1:2001; protection class: 2 | |
| EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 50295:1999 | |
| Standard conformity | ||
| Emitted interference | DIN EN 55011:2009, Class B | |
| Mech. capacity | EN 60068-2-6:2008 10 … 55 Hz / 1 mm / XYZ 30 min in each direction |
|
| Shock and impact resistance | EN 60068-2-27:1995 100 G / 2 ms / XYZ 3 times in each direction |
|
| Ambient conditions | ||
| Ambient temperature | -20 ... 65 °C (-4 ... 149 °F) | |
| Storage temperature | -25 ... 75 °C (-13 ... 167 °F) | |
| Relative humidity | ≤ 93 % at 40 °C (noncondensing) | |
| Altitude | 0 ... 2000 m | |
| Pollution degree | 2 | |
| Mechanical specifications | ||
| Degree of protection | IP65 (front) | |
| Mass | approx. 142 g | |
| Dimensions | 48 mm x 48 mm x 109.8 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210301 |
| ECLASS 12.0 | 27210301 |
| ECLASS 11.0 | 27210301 |
| ECLASS 10.0.1 | 27210301 |
| ECLASS 9.0 | 27210301 |
| ECLASS 8.0 | 27210301 |
| ECLASS 5.1 | 27210301 |
| ETIM 9.0 | EC002300 |
| ETIM 8.0 | EC002300 |
| ETIM 7.0 | EC002300 |
| ETIM 6.0 | EC002300 |
| ETIM 5.0 | EC000677 |
| UNSPSC 12.1 | 41111902 |
Details: KC-LCDC-48-2R-230VAC
Product Documentation: KC-LCDC-48-2R-230VAC
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 254 KB | |
| Manuals | |||
| Manual | ENG | 2176 KB | |
Approvals: KC-LCDC-48-2R-230VAC
| Declaration of Conformity | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2895B | ALL | 110 KB |
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.