| Accessory of |
|
|
|
| Inertial measurement unit for inclination, acceleration and rotation rate measurement in 3-axis each, Dynamic inclination measurement despite external acceleration, Adjustable ranges for compensation of external accelerations, disturbances, Adjustable thresholds for detection of measured value overruns, Measurement of inclination, acceleration and rotation rate in 3 axis each, CAN bus with SAE J1939 protocolfa |
|
|
|
|
E1-Type approval, Measuring range 0 ... 360°, High shock resistance, Extended temperature range
-40 ... +85 °C, CANopen interface, Increased noise immunity 100 V/mfa |
|
|
|
|
E1-Type approval, Measuring range 0 ... 360°, High shock resistance, Extended temperature range
-40 ... +85 °C, CANopen interface, Increased noise immunity 100 V/mfa |
|
|
|
|
| Radar sensor for distance and velocity measuring up to 25 m sensing range, with M12 connector, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69fa |
|
|
|
|
|
| Inertial measurement unit for inclination, acceleration and rotation rate measurement in 3-axis each, Dynamic inclination measurement despite external acceleration, Adjustable ranges for compensation of external accelerations, disturbances, Adjustable thresholds for detection of measured value overruns, Measurement of inclination, acceleration and rotation rate in 3 axis each, CAN bus with CANopenfa |
|
|
|
|
E1-Type approval, High shock resistance, Extended temperature range
-40 ... +85 °C, Measuring range -15° ... +15°, CAN bus with SAE J1939 protocolfa |
|
|
|
|
|
E1-Type approval, High shock resistance, Extended temperature range
-40 ... +85 °C, Measuring range -60° ... +60°, CAN bus with SAE J1939 protocolfa |
|
|
|
|
E1-Type approval, High shock resistance, Extended temperature range
-40 ... +85 °C, CAN bus with SAE J1939 protocol, Measuring range -85° ... +85°fa |
|
|
|
|
|
E1-Type approval, Measuring range 0 ... 360°, High shock resistance, Extended temperature range
-40 ... +85 °C, CAN bus with SAE J1939 protocolfa |
|
|
|
|
|
E1-Type approval, High shock resistance, Extended temperature range
-40 ... +85 °C, CANopen interface, Measuring range -15° ... +15°, Increased noise immunity 100 V/mfa |
|
|
|
|
E1-Type approval, Measuring range 0 ... 360°, High shock resistance, Extended temperature range
-40 ... +85 °C, CAN bus with SAE J1939 protocolfa |
|
|
|
|
| Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa |
|
|
|
|
| Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa |
|
|
|
|
|
| Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa |
|
|
|
|
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: UL Recognized , General purpose , Class 2 power source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: fixed cable with plug, Housing: PA-GF35, Connection assembly: AMP connector Superseal 282107-1
AMP contact Superseal 282109-1fa |
|
|
|
|
|
| Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: UL Recognized , General purpose , Class 2 power source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: fixed cable with plug, Housing: PA-GF35fa |
|
|
|
|
| Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa |
|
|
|
|
| Multi-ray LED scanner for measuring the distance to an object, measuring method: PRT, measuring range: up to 8 m on white, 2x M12 plugs, Distance measurement using object, Two-dimensional measurement with no moving parts, Measurement using eye-safe LED technology, 88° scanning angle, CANopen interfacefa |
|
|
|
|
| Radar sensor for distance and velocity measuring up to 25 m sensing range, with AMP connector, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69fa |
|
|
|
|
|
| Radar sensor for distance and velocity measuring up to 25 m sensing range, with 2m cable, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69fa |
|
|
|
|
|
| Radar sensor for distance and velocity measuring up to 25 m sensing range, with DEUTSCH connector, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69fa |
|
| Accessories |
|
|
|
| torque screwdriver (0.6 Nm)fa |
|
|
|
|
| plug-in cap M12fa |
|
|
|
|
| Unlocking protector for M12 connectorfa |
|
|
|
|
| Marking ring for M12 plugfa |
|
|
|
|
| Marking ring for M12 plugfa |
|
|
|
|
| Marking ring for M12 plugfa |
|
|
|
|
| Marking ring for M12 plugfa |
|
|
|
|
| Marking ring for M12 plugfa |
|
|
|
|
| Marking ring for M12 plugfa |
|
+61 3 9358 3400