Serviceline Industrial Sensors
Serviceline Explosion Protection

Print mark color sensor DF20/9S20/49/124

DF20/9S20/49/124
  • Diffuse mode sensor for recording colored print marks on backgrounds with different colors
  • Teach-in procedure for automatic threshold value setting
  • 3 emitter colors: green, red and blue
  • Very short response time
  • Optical system exchangeable by 90°
  • Sturdy, waterproof plastic housing
  • Impulsed time element off-delay

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  DF20/9S20/49/124

Product Description
Print mark color sensor, 9.5 mm detection range, RGB light with rectangular light spot, external Teach-In, Teach-In button, timer function, NPN output, PNP output, M12 plug
General specifications
Sensor range9.5 mm ± 2 mm
Light source3 LEDs (R,G,B)
Light typeVisible green/red/blue, modulated light
Light spot representationrectangular 1 mm x 4 mm
Angle deviationmax. ± 3°
Functional safety related parameters
MTTFd650 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED yellow, lights up if print mark is detected
flashes, if no safe operation is possible
Control elementsTeach-In key
Electrical specifications
Operating voltage10 ... 30 V DC
Ripple10 %
No-load supply current≤ 55 mA
Input
Function inputTeach-In input
Output
Switching typePNP switches according to +UB, NPN according to 0 V for detected mark
Signal output1 PNP and 1 NPN short-circuit protected, open collector, synchronized-switching
Switching voltagePNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V
Switching currentmax. 200 mA
Switching frequency1.65 kHz
Response time300 µs
Timer functionImpulsed time element off-delay 20 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
ApprovalsCE
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-20 ... 75 °C (-4 ... 167 °F)
Mechanical specifications
Degree of protectionIP67
Connection5-pin, M12 x 1 connector
Material
HousingPC (glass-fiber-reinforced Makrolon)
Optical faceglass
Mass200 g
Dimensions
Height85.5 mm
Width33 mm
Depth60.8 mm

Classifications

SystemClasscode
ECLASS 13.027270907
ECLASS 12.027270907
ECLASS 11.027270907
ECLASS 10.0.127270907
ECLASS 9.027270907
ECLASS 8.027270907
ECLASS 5.127270907
ETIM 9.0EC001817
ETIM 8.0EC001817
ETIM 7.0EC001817
ETIM 6.0EC001817
ETIM 5.0EC001817
UNSPSC 12.139121528

Details: DF20/9S20/49/124

Product Documentation: DF20/9S20/49/124

Language Selection:
Brief InstructionsLanguageFile TypeFile Size
Instruction leaflet / BeipackzettelALLPDF314 KB

Design / Simulation: DF20/9S20/49/124

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP154 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ71 KB

Approvals: DF20/9S20/49/124

Language Selection:
Declaration of ConformityCert No.LanguageFile TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2232AALLPDF185 KB

Associated Products: DF20/9S20/49/124

Accessories

Female cordset single-ended M12 straight A-coded, 5-pin, PUR cable greyfa