FieldBarrier Junction Box F.FB0.T**.***.1.0.***.***.****
- 4, 8 or 12 outputs Ex ia
- Brushed enclosure, IP66
- Configurable cable entries for trunk and spurs
- Packaged certified solution
- For FOUNDATION Fieldbus H1 and PROFIBUS PA
- Installation in Zone 1
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of F.FB0.T**.***.1.0.***.***.****
| Product Description |
|---|
| FieldBarrier Junction Box, Brushed Stainless Steel |
| General specifications | ||
|---|---|---|
| Design / Mounting | Outside installation | |
| Installed components | FieldBarrier RD0-FB-Ex4.COM For technical data on installed electronic component see data sheet. |
|
| Conformity | ||
| Degree of protection | EN 60529 | |
| Impact resistance | EN 60079-0 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Relative humidity | < 75 % (annual mean) < 95 % (30 d/year), no moisture condensation |
|
| Impact resistance | 7J | |
| Mechanical specifications | ||
| Enclosure cover | Hinged door with captive retaining screws | |
| Degree of protection | IP66 | |
| Cable entry | cable gland and stopping plug options see separate table | |
| Material | ||
| Housing | Stainless steel 1.4404 / AISI 316L | |
| Surface | brushed | |
| Seal | Silicone, fire-resistant, one piece, foamed | |
| Material thickness | enclosure body, enclosure cover, mounting plate: 1.5 mm | |
| Dimensions | (W x H x D) 300 x 230 x 160 mm (1 x RD0-FB-Ex4.COM) 380 x 380 x 220 mm (2 x RD0-FB-Ex4.COM) 480 x 380 x 220 mm (3 x RD0-FB-Ex4.COM) |
|
| Mounting | thru-holes Ø 7 mm | |
| Grounding | grounding bolt M6 , brass, nickel-plated | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | PTB 07 ATEX 1061 X (assembled Junction Box) , for additional certificates see www.pepperl-fuchs.com | |
| Marking |  II 2(1)G Ex db eb mb [ia] IIC T4 Gb II 2(1)D Ex tb [ia Da] IIIC T135°C Db Note: The marking is based on the maximum value and can be reduced depending on the selected options accordingly. |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-1:2014+AC:2018 , EN IEC 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN 60079-18:2015+Cor.2018 , EN 60079-31:2014 | |
| International approvals | ||
| IECEx approval | IECEx PTB 07.0036 X , suitable Junction Box on request | |
| INMETRO approval | TÜV 13.1143 | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242610 |
| ECLASS 12.0 | 27242610 |
| ECLASS 11.0 | 27242610 |
| ECLASS 10.0.1 | 27242610 |
| ECLASS 9.0 | 27242610 |
| ECLASS 8.0 | 27242610 |
| ECLASS 5.1 | 27242601 |
| ETIM 9.0 | EC001601 |
| ETIM 8.0 | EC001601 |
| ETIM 7.0 | EC001601 |
| ETIM 6.0 | EC001601 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121008 |
Details: F.FB0.T**.***.1.0.***.***.****
Function
This Junction Box is a device coupler with FieldConnex ® FieldBarriers for Zone 1. Devices can be located in Zone 0. The number of outputs and size can be selected.
Brushed stainless steel 316L provides high corrosion and impact resistance at a very wide temperature range.
Trunk and spur entries can be selected individually from a range of cable glands and stopping plugs. A breather is included by default. Tag plate, grounding bar, surge protection for the trunk, and bus termination are available as options.
This junction box is available pre-wired, with all accessories, for fast ordering, delivery, site installation, and commissioning.
Informative Literature: F.FB0.T**.***.1.0.***.***.****
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron | ENG | 361 KB | |
| Application Report - Digital Communication in Steel-Plate Manufacturing | ENG | 470 KB |
Product Documentation: F.FB0.T**.***.1.0.***.***.****
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Instruction manual | ENG | 140 KB | |
| Manuals | |||
| Manual | ENG | 928 KB | |
Approvals: F.FB0.T**.***.1.0.***.***.****
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| Europe PTB ATEX Category 2 G ATEX Category 2 D | PTB 07 ATEX 1061 X | ALL | 500 KB |
Associated Products: F.FB0.T**.***.1.0.***.***.****
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.