2-D Scanner OMD8000-R2100-R2-V1V17
- Measuring method PRT (Pulse Ranging Technology)
- Distance measurement using object
- Two-dimensional measurement with no moving parts
- Measurement using eye-safe LED technology
- 88° scanning angle
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of OMD8000-R2100-R2-V1V17
| Product Description |
|---|
| Multi-ray LED scanner for measuring the distance to an object, measuring method: PRT, measuring range: up to 8 m on white, 2x M12 plugs |
| General specifications | ||
|---|---|---|
| Measuring range | 0.2 ... 2 m (black 6 %) 0.2 … 8 m (white 90 %) |
|
| Light source | IRED | |
| Light type | modulated infrared light , 850 nm | |
| Measuring method | Pulse Ranging Technology (PRT) | |
| Scan rate | 20 s-1 (1 scan = 11 measurements) | |
| Scanning angle | 88° | |
| Diameter of the light spot | 550 mm at 4 m (central beam) | |
| Resolution | 1 mm | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | LED yellow | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 120 mA / 24 V DC | |
| Protection class | III (operating voltage 50 V) | |
| Time delay before availability | < 3 s | |
| Interface 1 | ||
| Interface type | RS 232 | |
| Protocol | P+F R2100 115k, 8N1 | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2:2007 | |
| Standard conformity | ||
| Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
|
| Measurement accuracy | ||
| Measured value noise | 20 mm (1 sigma, 4 m on white, central beam) | |
| Angle resolution | 8 ° | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Relative humidity | 95 % , no moisture condensation | |
| Mechanical specifications | ||
| Degree of protection | IP42 | |
| Connection | 5-pin, M12x1 connector, standard (supply) 8-pin, M12x1 connector, standard |
|
| Material | ||
| Housing | plastic | |
| Optical face | PMMA | |
| Mass | approx. 270 g | |
| Dimensions | ||
| Height | 39 mm | |
| Width | 80 mm | |
| Length | 136 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: OMD8000-R2100-R2-V1V17
Function
The new 2-dimensional multi-ray LED scanner uses tried-and-tested Pulse Ranging Technology and boasts a wide range of user-friendly features. The eye-safe LED technology in the sensor allows it to be used by personnel in all working areas without posing a danger. The 11 emitter elements arranged side by side span a scanning range of 88 degrees, while the emitter LEDs set themselves apart through their large light spot. Measuring on a surface rather than on a point makes it easier to measure inhomogeneous surfaces. A further highlight is the absence of any moving parts such as a motor or bearings, which makes the device less complex in its design and more resistant to mechanical stress.
Informative Literature: OMD8000-R2100-R2-V1V17
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Product Overview - LiDAR Sensors | ENG | 2253 KB | |
| Application Report - R2000 2-D-LiDAR Sensors for Navigating Automated Guided Vehicles | ENG | 337 KB |
Product Documentation: OMD8000-R2100-R2-V1V17
| Product information | Language | File Type | File Size |
|---|---|---|---|
| Technical information: serial Protocol / Technische Information: serielles Protokoll | ALL | 98 KB | |
| Brief Instructions | |||
| Instruction leaflet / Beipackzettel | ALL | 425 KB | |
Design / Simulation: OMD8000-R2100-R2-V1V17
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1779 KB |
Approvals: OMD8000-R2100-R2-V1V17
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-CA-L87056-31-02205102-0 / UL-US-L87056-11-02205102-0 | ALL | 487 KB |
Associated Products: OMD8000-R2100-R2-V1V17
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Discover the SmartRunner laser profile sensors equipped with a unique combination of light section technology and a 2-D vision sensor with integrated LEDs …
The R2000 provides reliable and extremely precise measuring results—with a gapless all-around visibility of 360° ...
Measuring in 3-D or at high speed: The R2300 series offers the right LiDAR sensor for every challenge. Learn more about the advantages, the technology, and the application areas ...
For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...
With state-of-the-art technologies, the distance sensors offer the highest levels of precision and reliability ...
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.