Surge Protector FN-LBAS-IA1
- For Ethernet-APL spur ports
- Intrinsically safe according to 2-WISE
- Stainless steel housing for field device mounting, 1/2" NPT thread
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of FN-LBAS-IA1
| Product Description |
|---|
| Surge protector, Ethernet-APL, field mounting, Ex ia, Ex d, Ex e, 1/2" NPT thread |
| General specifications | ||
|---|---|---|
| Design / Mounting | Outside installation | |
| Installation in hazardous area | Zone 1 | |
| Ethernet Interface | ||
| Interface type | Ethernet-APL auxiliary device | |
| Electrical specifications | ||
| Rated voltage | 30 V | |
| Rated current | 500 mA | |
| Impulse rating | 2 kV/1 kA (category C1) per line 5 kV/2,5 kA (category C2) per line 0,5 kA (category D1) per line |
|
| Impulse discharge current (10/350 µs) | 0.5 kA per line | |
| Nominal discharge current (8/20 µs) | ||
| per line | 2.5 kA | |
| total | 5 kA | |
| Max. surge current (8/20 µs) | 5 kA overstressed fault mode 1 acc. to IEC 61643-21 | |
| Voltage protection level | ||
| Line/Earth | max. 1800 V C1 , 1 kA per line max. 2100 V C2 , 2.5 kA per line max. 50 V C3 , 50 A per line max. 1400 V B2 , 50 A per line |
|
| Standard conformity | ||
| Degree of protection | IEC/EN 60529 | |
| Climatic conditions | IEC 60721 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Surge protection | IEC 61643-21 | |
| Ethernet | Ethernet-APL , IEEE 802.3 for 10BASE-T1L |
|
| Ambient conditions | ||
| Ambient temperature | -50 ... 80 °C (-58 ... 176 °F) | |
| Storage temperature | -50 ... 90 °C (-58 ... 194 °F) | |
| Shock resistance | 15 g 11 ms | |
| Vibration resistance | 1 g , 10 ... 150 Hz | |
| Mechanical specifications | ||
| Connection type | wire ends APL + red , APL - black , protective conductor (PE) green/yellow |
|
| Core cross section | APL +, APL - 0.8 mm2 , PE 1.3 mm2 |
|
| Housing material | Stainless steel 1.4401/316 | |
| Degree of protection | IP67 | |
| Mass | 200 g | |
| Mounting | NPT1/2 thread | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | TÜV 22 ATEX 8786 X | |
| Marking | 2-WISE auxiliary device | |
| Marking |  ll 2 (1) G Ex ia [ia Ga] IIC T6 Gb , ll 2 (1) D Ex ia [ia Da] lIIC T80°C Db , l M2 (M1) Ex ia [ia Ma] l Mb , ll 2 G Ex db eb mb IIC T6 Gb , l M2 Ex eb mb I Mb , lI 2 (1) G Ex db [ia Ga] IIC T6 Gb |
|
| Voltage | 30 V | |
| Current | 500 mA | |
| Internal capacitance | negligible 0 nF | |
| Internal inductance | negligible 0 µH | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN 60079-18:2015 , EN 60079-1:2014 , IEC TS 60079-47:2021 |
|
| International approvals | ||
| IECEx approval | IECEx TUR 22.0017X | |
| Approved for | Ex ia [ia Ga] IIC T6 Gb , Ex ia [ia Da] lIIC T80°C Db , Ex ia [ia Ma] l Mb , Ex db eb mb IIC T6 Gb , Ex db eb mb I Mb , Ex db [ia Ga] IIC T6 Gb |
|
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27171202 |
| ECLASS 12.0 | 27171202 |
| ECLASS 11.0 | 27130805 |
| ECLASS 10.0.1 | 27130805 |
| ECLASS 9.0 | 27130805 |
| ECLASS 8.0 | 27130805 |
| ECLASS 5.1 | 27130801 |
| ETIM 9.0 | EC000941 |
| ETIM 8.0 | EC000941 |
| ETIM 7.0 | EC000941 |
| ETIM 6.0 | EC000941 |
| ETIM 5.0 | EC000941 |
| UNSPSC 12.1 | 39121610 |
Details: FN-LBAS-IA1
Function
The surge protector protects spur ports of Ethernet-APL field devices.
The surge protector directs power from voltage surges and lightning to earth via gas discharge tubes.
The device is certified intrinsically safe for circuits in explosion-hazardous areas Zone 0 ... 2 according to 2‑WISE and FISCO. The surge protector can be installed in Zone 1 ... 2.
A ½" NPT mounting thread permits easy installation on field devices and fieldbus junction boxes.
Product Documentation: FN-LBAS-IA1
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Instruction manual | ENG | 165 KB | |
| Manuals | |||
| Manual | ENG | 1648 KB | |
Design / Simulation: FN-LBAS-IA1
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 102 KB |
Approvals: FN-LBAS-IA1
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| China SITIIAS CCC Ex Certificate | 2022322304004748 (Singapore) | ALL | 1107 KB | |
| Europe TUV Rheinland ATEX Certificate Surge Protective Device ATEX Category 2 (1) | TÜV 22 ATEX 8786 X | ALL | 1538 KB | |
| Worldwide TUV Rheinland Surge Protective Device IECEx Certificate of Conformity | IECEx TUR 22.0017X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) | TDOC-5857_ENG | ENG | 176 KB | |
Ethernet-APL enables continuous communication across all hierarchy levels. Learn more about the pioneering technology …
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.