AS-Interface power supply VAN-115/230AC-K19
- Up to 2.8 A output load
- Power factor correction
- Electronic overload protection and display
- LED operating display
- AS-Interface data decoupling
- PELV/SELV
- NEC Class 2 Power Supply
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of VAN-115/230AC-K19
| Product Description |
|---|
| AS-Interface power supply, data decoupling, 2,8 A |
| General specifications | ||
|---|---|---|
| UL File Number | E223176 | |
| MTBF | 221 a | |
| Indicators/operating means | ||
| LED AS-i ok | LED green: ON: AS-Interface voltage OK OFF: overload or no supply voltage |
|
| Electrical specifications | ||
| Fusing | 2.5 AT (not replacable) | |
| Capacity factor | > 0.5 | |
| Rated operating voltage | nominal: 100 ... 120 VAC/220 ... 240 VAC permissible: 85 ... 132 VAC/184 ... 264 VAC |
|
| Rated operating current | 2.0 A at 115 VAC 0.9 A at 230 VAC |
|
| Supply frequency | 47 ... 63 Hz | |
| Efficiency | 90.5 % (230 VAC, 2.8 A) | |
| Output | ||
| Current limit | > 3.2 A | |
| Voltage | 30.55 VDC ± 3 % fixed setting | |
| Current | 2.8 A | |
| Residual ripple | ≤ 50 mVss (500 kHz bandwidth, 50-Ω-measurement with ohmic load) | |
| Short-circuit current | min. 3.2 A, max. 4.6 A | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| Low Voltage Directive 2006/95/EC | EN 60950-1:2006, EN 61204-3:2001 | |
| EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-3:2007, EN 50295:1999 | |
| Standard conformity | ||
| Electromagnetic compatibility | EN 61000-6-2:2005; EN 61000-6-3:2007 | |
| AS-Interface | EN 50295:1999, IEC 62026-2:2006 | |
| Mech. capacity | EN 60068-2-6:2008 | |
| Shock and impact resistance | EN 60068-2-27:1995 | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 70 °C (14 ... 158 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Shock and impact resistance | 15g/6 ms 10g/11 ms |
|
| Vibration resistance | 2 ... 17,8 Hz / 1.6 mm 17.8 ... 500 Hz / 2.0 g |
|
| Pollution degree | 2 (EN 60950) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Protection class | I, Protective conductor connection necessary | |
| Connection | Connection terminals, max. conductor cross-section 0.5 ... 6 mm2 (20-10 AWG), Stripping length 7 mm | |
| Mass | approx. 500 g | |
| Dimensions | ||
| Height | 124 mm | |
| Width | 49 mm | |
| Length | 102 mm | |
| Mounting | DIN mounting rail | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27040301 |
| ECLASS 12.0 | 27040301 |
| ECLASS 11.0 | 27040301 |
| ECLASS 10.0.1 | 27040301 |
| ECLASS 9.0 | 27040301 |
| ECLASS 8.0 | 27040301 |
| ECLASS 5.1 | 27040301 |
| ETIM 9.0 | EC002540 |
| ETIM 8.0 | EC002540 |
| ETIM 7.0 | EC002540 |
| ETIM 6.0 | EC002540 |
| ETIM 5.0 | EC002540 |
| UNSPSC 12.1 | 39121004 |
Details: VAN-115/230AC-K19
Function
The primary pulsed power supply was developed for fieldbus applications that transfer power and data via one two-wire line
(AS-Interface concept). With an output current of 2.8 A, it supplies a fully configured AS-Interface system.
In this case, the power supply is responsible for supplying power, decoupling the data to the supply source and providing for symmetry of the two output lines (AS-Interface + and AS-Interface -) relative to the machine mass (shield connection).
The exact and transformatory coupling permits the use of unshielded load lines.
The input voltage range of the device can be selected with a switch. Thus, the power supply can be operated on all conventional single-phase mains voltages worlwide.
Fusing:
The power supply is protected electronically against external short circuits. The internal fuse disconnects the power supply from the network in the case of a defect.
Product Documentation: VAN-115/230AC-K19
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 262 KB |
Design / Simulation: VAN-115/230AC-K19
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 16846 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 80 KB |
Approvals: VAN-115/230AC-K19
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| US CA UL | E223176 | ALL | LINK | --- |
| US CA UL | CoC E223176 RptRef E223176-20070416 | ALL | 444 KB | |
| Worldwide AS-International Association AS-Interface | 92901 | ALL | 585 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4815A | ALL | 164 KB | |
Associated Products: VAN-115/230AC-K19
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.