Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
ML4.2-54-F/40b/110/115
| Produkt beskrivelse |
| Retroreflective sensor for complex applications, miniature design, polarization filter, 6 m detection range, red light, light/dark on, push-pull output, fixed cable |
| General specifications |
| Effective detection range | 0 ... 5 m |
| Reflector distance | 0 ... 5 m |
| Threshold detection range | 6 m |
| Reference target | H85-2 reflector |
| Light source | LED |
| Light type | modulated visible red light , 660 nm |
| Polarization filter | yes |
| Angle deviation | max. ± 1° |
| Diameter of the light spot | approx. 40 mm at detection range 1 m |
| Opening angle | 1.7 ° |
| Ambient light limit | |
| Continuous light | 40000 Lux |
| Modulated light | 5000 Lux |
| Functional safety related parameters |
| MTTFd | 1940 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator | LED yellow: switching state ; Operating reserve |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 20 mA at 24 V DC |
| Output |
| Switching type | light/dark on electrically switchable |
| Signal output | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Voltage drop | ≤ 2.5 V DC |
| Switching frequency | 1 kHz |
| Response time | 500 µs |
| Compliance with standards and directives |
| Standard conformity | |
| Product standard | EN 60947-5-2:2007
IEC 60947-5-2:2007 |
| Shock and impact resistance | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -2000 Hz, 10 g in each X, Y and Z directions |
| Approvals and certificates |
| CE conformity | yes |
| UL approval | cULus Listed |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -20 ... 75 °C (-4 ... 167 °F) |
| Mechanical specifications |
| Degree of protection | IP67 / IP69K |
| Connection | 2 m fixed cable |
| Material | |
| Housing | ABS |
| Optical face | glass pane |
| Cable | PUR |
| Mass | approx. 50 g |
| Dimensions | |
| Height | 31.4 mm |
| Width | 13.9 mm |
| Depth | 18 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270902 |
| ECLASS 12.0 | 27270902 |
| ECLASS 11.0 | 27270902 |
| ECLASS 10.0.1 | 27270902 |
| ECLASS 9.0 | 27270902 |
| ECLASS 8.0 | 27270902 |
| ECLASS 5.1 | 27270902 |
| ETIM 9.0 | EC002717 |
| ETIM 8.0 | EC002717 |
| ETIM 7.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| ETIM 5.0 | EC002717 |
| UNSPSC 12.1 | 39121528 |
Details:
ML4.2-54-F/40b/110/115
Product Documentation:
ML4.2-54-F/40b/110/115
Design / Simulation:
ML4.2-54-F/40b/110/115
Approvals:
ML4.2-54-F/40b/110/115
Tilhørende produkter:
ML4.2-54-F/40b/110/115
| Accessories |
|
|
|
| Mounting Clampfa |
|
|
|
|
| Mounting bracket fa |
|
|
|
|
| Mounting bracket fa |
|
|
|
|
| Mounting bracket fa |
|
|
|
|
| Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa |
|
|
|
|
| Reflector, round ø 84 mm, central mounting holefa |
|
|
|
|
| Reflector with mounting holesfa |
|
|
|
|
| Reflector, rectangular 60 mm x 19 mm, mounting holesfa |
|
|
|
|
| Reflective tape 100 mm x 100 mmfa |
|
|
|
|
| Reflector, round ø 20.5 mm, self-adhesivefa |
|
+45 7010 4210