Absolute rotary encoder ENA58IL-R***-Profibus

Recessed hollow shaft
30 Bit multiturn
Free of wear magnetic sampling
High resolution and accuracy
Mechanical compatibility with all major encoders with fieldbus interface
Status LEDs

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for ENA58IL-R***-Profibus

General specifications
Detection type		magnetic sampling
Device type		Absolute rotary encoder
Linearity error		≤ ± 0.1 °
UL File Number		E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product.
Functional safety related parameters
MTTF_d		280 a at 40 °C
Mission Time (T_M)		12 a
L₁₀		5 E+8 revolutions at 24/198 N axial/radial shaft load
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
Power consumption		approx. 2.5 W
Time delay before availability		< 1000 ms
Output code		binary code
Code course (counting direction)		adjustable
Interface
Interface type		PROFIBUS DP DPV0, DPV1, DPV2
Resolution
	Single turn	up to 16 Bit
	Multiturn	up to 14 Bit
	Overall resolution	up to 30 Bit
Transfer rate		≤ 12 MBit/s
Connection
Connector		For model with axial connector outlet or connection cover with radial connector outlet: Profibus: 1 plug M12 x 1, 5-pin, B-coded; 1 socket M12 x 1, 5-pin, B-coded Supply: 1 plug M12 x 1, 4-pin, A-coded
Terminal compartment		For model with connection cover with radial cable outlet
Standard conformity
Degree of protection		DIN EN 60529 , axial connector outlet: IP54 connection cover and shaft seal: IP66/IP67 connection cover, no shaft seal: IP65
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 1000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product.
Ambient conditions
Operating temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		98 % , no moisture condensation
Mechanical specifications
Material
	Housing	Zinc plated steel, painted
	Flange	Aluminum
	Shaft	Stainless steel
Mass		approx. 300 g for model without connection cover approx. 510 g for model with connection cover
Rotational speed		max. 12000 min ^-1 for IP54, IP65 max. 3000 min ^-1 for IP66/IP67
Moment of inertia		30 gcm²
Starting torque		< 3 Ncm
Shaft load
	Axial	24 N
	Radial	198 N
	Angle offset	± 0.9 °
	Axial offset	± 0.3 mm static
	Radial offset	± 0.5 mm static
Accessories
Designation		for model without connection cover : Terminator ICZ-TR-V15B, item number 127860 (optional)

Classifications

System	Classcode
ECLASS 13.0	27270502
ECLASS 12.0	27270502
ECLASS 11.0	27270502
ECLASS 10.0.1	27270502
ECLASS 9.0	27270502
ECLASS 8.0	27270502
ECLASS 5.1	27270502
ETIM 9.0	EC001486
ETIM 8.0	EC001486
ETIM 7.0	EC001486
ETIM 6.0	EC001486
ETIM 5.0	EC001486
UNSPSC 12.1	39121527

Details: ENA58IL-R***-Profibus

Informative Literature: ENA58IL-R***-Profibus

Literature	Sprog	Fil type	Fil størrelse
Application Report - Precise Positioning in Filling Plants	ENG	PDF	225 KB
Application Report - Reliable Positioning of Yard Machines	ENG	PDF	461 KB
Application Report - Synchronous Roller Movement in Printing Presses	ENG	PDF	198 KB

Product Documentation: ENA58IL-R***-Profibus

Brief Instructions	Sprog	Fil type	Fil størrelse
Instruction leaflet / Beipackzettel	ALL	PDF	1305 KB
Manuals
Manual absolute rotary encoders with PROFIBUS interface	ENG	PDF	6740 KB

Design / Simulation: ENA58IL-R***-Profibus

CAD	Sprog	Fil type	Fil størrelse
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: ENA58IL-R***-Profibus

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
US CA UL	CoC 20190913-E223176 RptRef E223176-20081013	ALL	PDF	280 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3270A	ALL	PDF	86 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-7159	ALL	PDF	248 KB

Software: ENA58IL-R***-Profibus

Device Description Files/Drivers	Udgivelses info	Fil type	Fil størrelse
GSD file, Encoders Pxx58, ENA58IL / GSD-Datei, Drehgeber Pxx58, ENA58IL	2014-09	ZIP	8 KB

Tilhørende produkter: ENA58IL-R***-Profibus

Accessories

	ICZ-TR-V15B Terminal resistor
	Terminal resistor for PROFIBUSfa

	9404 6*6 Coupling
	Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa

	9409 6*10 Coupling
	Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa

	9409 6*6 Coupling
	Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa

	9410 6*6 Coupling
	Precision coupling, Precision couplingfa

	KW-6/10 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	KW-6/6 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	KW-6/8 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	9109, 6 Measuring wheel
	Measuring wheel for shaft diameter 6 mm, Pimpled rubber coating, 200 mm circumferencefa

	9110, 6 Measuring wheel
	Measuring wheel for shaft diameter 6 mm, Knurled aluminum, 200 mm circumferencefa

	9113, 6 Measuring wheel
	Measuring wheel for shaft diameter 6 mm, Knurled plastic, 200 mm circumferencefa

	ACC-PACK-ABS-_S_58 ø15 Torque rest
	Accessory kit for ∅58 absolute rotary encoder with recessed hollow shaft 15 mmfa

	ACC-PACK-ABS-_S_58 ø14 Torque rest
	Accessories set for ∅58 absolute rotary encoder with recessed hollow shaft 14 mmfa

	ACC-PACK-ABS-_S_58 ø12 Torque rest
	Accessories set for ∅58 absolute rotary encoder with recessed hollow shaft 12 mmfa

	ACC-PACK-ABS-_S_58 ø10 Torque rest
	Accessory kit for ∅58 absolute rotary encoder with recessed hollow shaft 10 mmfa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

ENA58IL Magnetic Rotary Encoder – Explore the New Benchmark for Industry Standard Rotary Encoders.

Magnetic Precision. Under any Condition. - Magnetic Encoder Technology by Pepperl+Fuchs

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.