Distance sensor VDM18-300/20/88/122/151
- Analog output 4 mA ... 20 mA
- High resolution
- Very fast response characteristic, suitable for rapid scanning process
- Interface RS 485
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for VDM18-300/20/88/122/151
| Produkt beskrivelse |
|---|
| Universal distance sensor, measurement to object, 300 mm detection range, red laser light, laser class 2, RS485 interface, 2 x PNP outputs, analog output, M12 plug |
| General specifications | ||
|---|---|---|
| Measuring range | 80 ... 300 mm | |
| Light source | laser diode typ. service life 50,000 h at Ta = +40 °C |
|
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 2 | |
| Wave length | 650 nm | |
| Light spot representation | approx. 2 mm x 4.5 mm at 300 mm | |
| Measuring method | Laser triangulation | |
| Ambient light limit | ≤ 5000 Lux | |
| Nominal ratings | ||
| Linearity error | 0.25 % of the measuring range | |
| Repeat accuracy | < 0.25 % of the measured value | |
| Resolution | < 0.1 % of the measuring range | |
| Temperature drift | < 0.02 % / °C | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | 2 yellow LEDs: Switching status (each output) , 4 green LEDs: Operating mode | |
| Control elements | Control panel : Adjuster for switch point , Operating mode , Analog output ( S - Set , T - Toggle ) | |
| Parameterization indicator | LED red | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC | |
| No-load supply current | ≤ 40 mA at 24 V DC | |
| Protection class | II , rated voltage ≤ 50 V DC | |
| Time delay before availability | ≤ 300 ms | |
| Interface | ||
| Interface type | RS-485 | |
| Output | ||
| Interfaces | RS-485 | |
| Signal output | 2 PNP outputs, independent , short-circuit protected, reverse polarity protected | |
| Switching current | max. 100 mA | |
| Measurement output | 1 analog output 4 ... 20 mA, short-circuit/overload protected , Rmax = 500 Ohm | |
| Switching frequency | ≤ 1 kHz | |
| Response time | 0.4 ms | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2 | |
| Standard conformity | ||
| Laser class | DIN EN 60825-1:2008, IEC 60825-1:2007 | |
| Approvals and certificates | ||
| UL approval | cULus Listed | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 60 °C (14 ... 140 °F) | |
| Storage temperature | -20 ... 80 °C (-4 ... 176 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | M12 connector, 8-pin | |
| Material | ||
| Housing | ABS , impact resistant | |
| Optical face | PMMA | |
| Mass | approx. 43 g | |
| Dimensions | ||
| Height | 50 mm | |
| Width | 17 mm | |
| Depth | 50 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: VDM18-300/20/88/122/151
Product Documentation: VDM18-300/20/88/122/151
| Manuals | Sprog | Fil type | Fil størrelse |
|---|---|---|---|
| Manual VDM18/151 | ENG | 1008 KB |
Design / Simulation: VDM18-300/20/88/122/151
| CAD | Sprog | Fil type | Fil størrelse |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 248 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VDM18-300/20/88/122/151
| Certificates | Certifikat nr. | Sprog | Fil type | Fil størrelse |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
| EU Pepperl+Fuchs | PF08CERT1244 | ALL | 503 KB |
Software: VDM18-300/20/88/122/151
| Software Tools | Udgivelses info | Fil type | Fil størrelse |
|---|---|---|---|
| Software for VDM18*/88* Series / Software für Serie VDM18*/88* | 07/2007 | ZIP | 1065 KB |
Tilhørende produkter: VDM18-300/20/88/122/151
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Discover the SmartRunner laser profile sensors equipped with a unique combination of light section technology and a 2-D vision sensor with integrated LEDs …
The R2000 provides reliable and extremely precise measuring results—with a gapless all-around visibility of 360° ...
Measuring in 3-D or at high speed: The R2300 series offers the right LiDAR sensor for every challenge. Learn more about the advantages, the technology, and the application areas ...
For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...
With state-of-the-art technologies, the distance sensors offer the highest levels of precision and reliability ...
Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
+45 7010 4210
Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.