Archived Product Version

RVI58N-******1 Incremental Encoder for special applications

Key Benefits at a Glance

Up to 50,000 ppr
Extended temperature range
Industrial standard housing ∅58 mm
Servo or clamping flange
10 V ... 30 V with short-circuit proof push-pull output

Product photo: Incremental Encoder for special applications RVI58N-******1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet Function Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of RVI58N-******1

Detection type		photoelectric sampling
Pulse count		max. 50000

MTTF_d		140 a
L₁₀		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %

Operating voltage	U_B	10 ... 30 V DC
No-load supply current	I₀	max. 60 mA

Output type		push-pull, incremental
Voltage drop	U_d	< 3 V
Load current		max. per channel 40 mA , short-circuit protected, reverse polarity protected
Output frequency		max. 200 kHz
Rise time		400 ns

Connector		type 9416 (M23), 12-pin, type 9416L (M23), 12-pin or M12 connector, 8-pin
Cable		∅7.8 mm, 6 x 2 x 0.14 mm², 1 m

Degree of protection		DIN EN 60529, IP65
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz

UL approval

cULus Listed, General Purpose, Class 2 Power Source

Operating temperature		-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F) , cable, fixed installation -40 ... 80 °C (-40 ... 176 °F) with Option T , cable, fixed installation
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)

Material

Housing		powder coated aluminum
Flange		3.1645 aluminum
Shaft		Stainless steel 1.4305 / AISI 303

Mass

approx. 350 g

Rotational speed

max. 12000 min ^-1

Moment of inertia

≤ 25 gcm²

Starting torque

≤ 1.5 Ncm

Shaft load

Axial		40 N at max. 6000 min^-1 10 N at max. 12000 min^-1
Radial		60 N at max. 6000 min^-1 20 N at max. 12000 min^-1

Dimensions

Diameter

58 mm

General Notes

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Categories	Description	Status
Functional	These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login).
Analytics	We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it.
Marketing	These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content.