PS3500 Power Supply Module PS3500-PM-1.24.15
- N+1 redundancy provides highest reliability
- Diagnostics and fault indication
- Modular and hot swappable
- Automatic load sharing
- Adjustable voltage
- Fanless
- ATEX, IECEx, and cULus approvals for Div 2/Zone 2
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of PS3500-PM-1.24.15
| Product Description |
|---|
| PS3500 power supply module - 24 V DC/15 A |
| Interface | ||
|---|---|---|
| Type | diagnostic bus: RS 485 | |
| Input | ||
| Input current | max 6.5 A | |
| Voltage range | 90 ... 250 V AC, 44 ... 66 Hz; 90 ... 300 V DC | |
| Inrush current | < 50 A peak for 50 µs | |
| Output | ||
| Rated voltage | 24 V DC | |
| Voltage | 24 V DC ± 1 % (22.5 ... 30 V DC adjustable) |
|
| Current | 15 A | |
| Ripple | 35 mV rms (< 100 mV pp) | |
| Fault signal | relay 50 V DC @ 0.6A 30 V DC @ 2A |
|
| Response time | min. hold-up time: ≥ 25 ms at nominal input voltage and output load | |
| Short-circuit current | max. 20 A | |
| Efficiency | up to 91 % | |
| Galvanic isolation | ||
| Input/Output | 4.25 kV DC | |
| Indicators/settings | ||
| Display elements | LED Power, green: power on LED Fault, red: fault indication LED Alarm, red: module shut-down |
|
| Directive conformity | ||
| Electromagnetic compatibility | Refer to DoC for all directives and standards met. | |
| Conformity | ||
| Galvanic isolation | IEC 61131-2 | |
| Electromagnetic compatibility | NE 21:2006 | |
| Degree of protection | EN 60529 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 45 °C (-13 ... 113 °F) , derated: 0,4 A/°C, (from 45 ... 70 °C (113 ... 158 °F)) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | < 95 % , noncondensing | |
| Shock resistance | 15 g , 11 ms | |
| Vibration resistance | 1 g , 58 ... 150 Hz | |
| Mechanical specifications | ||
| Housing material | Powder Coated, 1010 Cold Rolled Steel | |
| Degree of protection | IP20 | |
| Mass | approx. 1.8 kg ( 4.125 lbs ) | |
| Dimensions | 134 x 62 x 268 mm (5.3 x 2.5 x 10.6 inch) | |
| Height | 134 mm | |
| Width | 62 mm | |
| Depth | 268 mm | |
| Data for application in connection with hazardous areas | ||
| Certificate | DEMKO 12 ATEX 1103387X | |
| Marking |  II 3 G Ex ec nC IIC T4 Gc |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018; EN IEC 60079-7:2015+A12018; EN 60079-15:2019; EN 61010-1 | |
| International approvals | ||
| UL approval | cULus Listed E230669 E350173 |
|
| Approved for | Class I/Div 2, ABCD Class I, Zone 2, Grp IIC T4 | |
| IECEx approval | IECEx UL 13.0082X Ex ec nC IIC T4 Gc |
|
| General information | ||
| Supplementary information | Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27040790 |
| ECLASS 12.0 | 27040790 |
| ECLASS 11.0 | 27040790 |
| ECLASS 10.0.1 | 27040790 |
| ECLASS 9.0 | 27040790 |
| ECLASS 8.0 | 27049090 |
| ECLASS 5.1 | 27049090 |
| ETIM 9.0 | EC002542 |
| ETIM 8.0 | EC002542 |
| ETIM 7.0 | EC002542 |
| ETIM 6.0 | EC002542 |
| ETIM 5.0 | EC002542 |
| UNSPSC 12.1 | 39121004 |
Details: PS3500-PM-1.24.15
Function
The PS3500-PM-1.24.15 power supply module works with the PS2500/PS3500 series backplanes. The power supply is well suited for emergency shut down systems, fieldbus / HART networks, as well as any general-purpose process applications.
Each 24 V, 15 A module plugs directly into a 3- or 6-position backplane allowing a maximum capacity of 45 A or 90 A of uninterrupted power. The output voltage is adjustable from 22.5 V to 30 V DC via potentiometers on the backplane.
Universal input power is standard and allows a battery backup, eliminating the need for a UPS connection. The power supply modules are highly efficient (up to 91%) and use natural convection cooling.
Each module operates with automatic load sharing, so modules are hot swappable with no effect on the output supply.
Product Documentation: PS3500-PM-1.24.15
| Product information | Language | File Type | File Size |
|---|---|---|---|
| Unrelenting Current Powering Availability with PS3500 Power Supplies | ENG | 548 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 167 KB | |
| Manuals | |||
| PS3500-N+1 Redundant Power Supply Installation and Operation Manual | ENG | 2896 KB | |
Design / Simulation: PS3500-PM-1.24.15
| CAD | Language | File Type | File Size |
|---|---|---|---|
| DWG files for PS3500 power supply system / CAD 2-D | ALL | ZIP | 10039 KB |
Approvals: PS3500-PM-1.24.15
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| /cert/certb043b.pdf | DEMKO 12 ATEX 1103387X | ALL | 203 KB | |
| IECEx Certificate of Conformity | IECEx UL 13.0082X | ALL | LINK | --- |
| India CCOE | A/P/HQ/KA/104/5909 (P513784) | ALL | 100 KB | |
| UL | E230669 (NMTR, NMTR7) | ALL | 312 KB | |
| UL UL | E350173 (NRAD, NRAD7) | ALL | 408 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B011E | ALL | 153 KB | |
| UK Declaration of Conformity / UK-Konformitätserklärung | DOC-B0F9 | ALL | 151 KB | |
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.