Select Your Country

Go to global website

  1. en
  2. Products
  3. Hazardous Area Products and Solutions
  4. Network Technology
  5. Wireless Access Point Solutions
  6. EJB10A.I.CP-Y*

EJB10A.I.CP-Y* Wireless Access Point (Ex d)

Key Benefits at a Glance

  • Copper-free aluminum enclosure
  • Installation in Zone 1, Zone 2, Zone 21 and Zone 22
  • Suitable for operation in Class I, II Division 1
  • Ex d and Ex tb certified
  • Gas group IIB+H2
  • Use of industrial Wireless Access Points in hazardous areas
  • External antennas for best possible signal dispersion
  • Customizable configuration of WI-FI and network devices and cable entries as per specification
  • Degree of protection IP66 or IP66 / IP67, NEMA Type 4X
  • Image and drawing are generic for this device type and may deviate from the specific variant

Show more

Please contact us for exact delivery estimation.
Product photo: Wireless Access Point (Ex d) EJB10A.I.CP-Y*
Dimensions: Wireless Access Point (Ex d) EJB10A.I.CP-Y*
Product photo: Wireless Access Point (Ex d) EJB10A.I.CP-Y*
Dimensions: Wireless Access Point (Ex d) EJB10A.I.CP-Y*
Approval
Product Compliance: Europe – CE
Approval
Product Compliance: USA - cETLus Intertek
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN
  • DE
  • EN
DatasheetFunctionClassificationProduct DocumentationApprovals

Technical data of EJB10A.I.CP-Y*

Wireless Access Point in copper-free aluminum enclosure for use in explosion-hazardous areas
Operating voltage1500 V DC / 1000 V AC max. for ATEX / IECEx
600 V AC / DC max. for North American approvals
Operating current1600 A max.
Thread typemetric ISO pitch 1.5 mm or NPT ANSI ASME B1.20.1
Enclosure coverdetachable , optional hinges
Cover fixingstainless steel socket cap head screws
Screwssee datasheets of relevant enclosures
Material of screwsstainless steel
Yield stressmin. 450 N/mm2 for ATEX / IECEx , 100,000 PSI for North American approvals
Cover sealnone, O-ring for IP66/67
Flamepath greaseGreasil MS4 or NEVER SEEZ Marine Grade
Degree of protectionIP66 (IP66/IP67 with O-ring) , NEMA Type 4, 4X, 7, 9
Material
Enclosurealuminum alloy
Glassthermo-resistant tempered glass
Finishepoxy coated RAL 7005 (grey)
O-Ringsilicone
Mass25.1 kg
Dimensions468 mm x 358 mm x 215 mm
values might differ slightly due to casting and manufacturing tolerances
Mountingsee datasheets of relevant enclosures
GroundingM6 external grounding points
Ambient temperature-40 ... 50 °C (-40 ... 122 °F)
depending on integrated components
EU-type examination certificateINERIS 14 ATEX 0022X
MarkingEx-Hexagon II 2 GD
Ex db IIB+H2 T* Gb
Ex tb IIIC T** °C Db
T6/T85 °C
T5/T100 °C
T4/T135 °C
T3/T200 °C
depending on configuration, ambient temperature and built-in power loss
Maximum power dissipationsee datasheets of relevant enclosures
maximum power dissipation at T4/+40 °C
enclosure without window
UL approval
Approved forClass I, Division 1, Groups B, C, D
Class II, Division 1, Groups E, F, G
Type 4, 4X, 7, 9
cULusEmpty enclosure E482035 , UL 50E , UL 1203 , CSA C22.2, No. 25, 30
cETLusControl panels E5003368
Ambient temperature-25 ... 60 °C (-13 ... 140 °F)
IECEx approvalIECEx INE 14.0029X
Further approvalsavailable on request
Degree of protectionEN60529 and UL 50 / UL 50E
CE marking0080 or 0102, see type label
Ordering informationThis Wireless Access Point solution will be delivered completely configured and assembled ready for use. For configuration details please contact customer service.
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Installed componentsAll major WI-FI Access Point vendors such as Aruba, Cisco, ect.
General Notes

Related News and Applications

Read more on news and applications related to this product.

Products and Solutions
7/16/2024

Wireless Communication for Process Automation: Pepperl+Fuchs Manufactures Fully Ex-Certified Access Point Solutions

Pepperl+Fuchs' wireless access point solution is fully certified in accordance with ATEX/IECEx standards.
More information

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies