Key Benefits at a Glance
Show more
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
| Detection type | photoelectric sampling | |
| Device type | Multiturn absolute rotary encoder |
| MTTFd | 210 a | |
| L10 | 7.7 E+9 at 3000 rpm |
| Operating voltage | UB | 10 ... 30 V DC |
| No-load supply current | I0 | max. 90 mA |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit | |
| Output code | Gray code, binary code | |
| Code course (counting direction) | see input 1 |
| Interface type | SSI | ||||||||||
| Monoflop time | 20 ± 10 µs | ||||||||||
| Resolution | |||||||||||
| |||||||||||
| Transfer rate | 0.1 ... 2 MBit/s | ||||||||||
| Standard conformity | RS 422 | ||||||||||
| Input type | Selection of counting direction (cw/ccw) | |||||||
| Signal voltage | ||||||||
| ||||||||
| Input current | < 6 mA | |||||||
| Switch-on delay | < 10 ms | |||||||
| Input type | zero-set (PRESET) | |||||||
| Signal voltage | ||||||||
| ||||||||
| Input current | < 6 mA | |||||||
| Signal duration | min. 100 ms | |||||||
| Switch-on delay | < 10 ms | |||||||
| Cable | ∅ 10.2 mm, Radox 9 x 0.5 mm2 | |
| Terminal compartment | see ordering information |
| Degree of protection | DIN EN 60529, IP66 | |
| Climatic testing | DIN EN 60068-2-78 , no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz |
| IECEx approval | |||||
| |||||
| ATEX approval | |||||
| |||||
| Operating temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Material | |||||||||||
| |||||||||||
| Mass | approx. 2600 g (combination 1) approx. 3900 g (combination 2) | ||||||||||
| Rotational speed | max. 3000 min -1 | ||||||||||
| Moment of inertia | 180 gcm2 | ||||||||||
| Starting torque | ≤ 4 Ncm | ||||||||||
| Shaft load | |||||||||||
| |||||||||||
| Use in the hazardous area | see instruction manuals |
We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.
We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.
| Categories | Description | Status |
|---|---|---|
| Functional | These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login). | |
| Analytics | We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it. | |
| Marketing | These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content. |