Select Your Country

Go to global website

  1. en
  2. Products
  3. Industrial Sensors
  4. Rotary Encoders
  5. Cable-Pull Rotary Encoders
  6. ECA10TL - SSI

ECA10TL - SSI Cable pull rotary encoder

Key Benefits at a Glance

  • Solid yet lightweight plastic construction
  • Compact, slim design (the shaft of the mounted rotary encoder is used to provide the function of the drum bearing)
  • Coupling-free adaptation
  • Wide range of mounting options
  • Rust and acid-resistant measuring cable
  • Very high level of linearity and repeatability
  • SSI interface
  • Free of wear magnetic sampling
  • Additionally push buttons for preset function (only model characteristic SB2, SG2)

Show more

Please contact us for exact delivery estimation.
Product photo: Cable pull rotary encoder ECA10TL - SSI
Product photo: Cable pull rotary encoder ECA10TL - SSI
Product Compliance: Europe – CE
SSI interface
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN
  • DE
  • EN
  • ES
  • FR
DatasheetFunctionClassificationInformative LiteratureProduct DocumentationApprovals

Technical data of ECA10TL - SSI

Cable pull rotary encoder with SSI interface
Detection typemagnetic sampling
Device typeTarget line with SSI interface
Measuring length3000 ... 10000 mm
Construction type80 mm, 130 mm, 190 mm
ResolutionCable pull:
design 80 mm: with 13 Bit 0,028 mm; with 12 Bit 0,056 mm
design 130 mm: with 13 Bit 0,047 mm; with 12 Bit 0,094 mm
design 190 mm: with 13 Bit 0,068 mm; with 12 Bit 0,0135 mm
Encoder:
standard 25 Bit (13 Bit/revolution) or as an option 24 Bit (12 Bit/revolution)
Operating voltageUB4.75 ... 30 V DC
No-load supply currentI0typ. 50 mA
Power consumptionP0approx. 1.5 W
Output codeGray code, binary code
Code course (counting direction)adjustable
Interface typeSSI
Transfer rate0.1 ... 2 MBit/s
Cycle time< 100 µs
Standard conformityRS 422
Input typeSelection of counting direction (cw/ccw)
Signal voltage
High4.75 V ... UB (cw descending)
Low0 ... 2 V or unconnected (cw ascending)
Input current< 6 mA
Input typezero-set (PRESET 1) with falling edge
Signal voltage
High4.75 V ... UB
Signal durationmin. 1.1 s
ConnectorM12 connector, 8-pin or M23 connector, 12-pin
Cable∅7 mm, 6 x 2 x 0.14 mm2
Degree of protectionacc. DIN EN 60529
Connection sidecable models: IP65
connector models: IP65
Cable pull: IP50
Climatic testingDIN EN 60068-2-3, no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Ambient temperature-30 ... 70 °C (-22 ... 158 °F)
Operating temperature-30 ... 70 °C (-22 ... 158 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F)
Relative humidity98 % , no moisture condensation
Rope diameter0.55 mm
Material
Housingnickel-plated steel
Cable pulldesign 80/130 : Luranyl® or Lexan 920
design 190 : ABS-GF17
FlangeAluminum
RopeStainless steel 1.4401/316
Life spanup to 106 Cycles
General Notes

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Privacy Policy

Deny all cookies