Select Your Country

Go to global website

  1. en
  2. Products
  3. Industrial Sensors
  4. RFID and Optical Identification
  5. RFID Read/Write Devices
  6. IPH-L2-V1

IPH-L2-V1 RFID read/write device

Key Benefits at a Glance

  • VariKont L(r) Type with variable alignment capability in 15° steps and front face in 90° steps
  • 4 x dual LEDs on the corners for visibility on all sides
  • Degree of protection IP67
  • Connection via V1 (M12 x 1) plug connection
  • For connection to IDENTControl evaluation unit

Show more

Please contact us for exact delivery estimation.
Product photo: RFID read/write device IPH-L2-V1
Dimensions: RFID read/write device IPH-L2-V1
Product photo: RFID read/write device IPH-L2-V1
Dimensions: RFID read/write device IPH-L2-V1
Product Compliance: USA - cULus LISTED
Product Compliance: Europe – CE
Product Compliance: USA - FCC
Approval
Product Compliance: United Kingdom – UKCA
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN
  • DE
  • EN
  • ZH
DatasheetClassificationInformative LiteratureProduct DocumentationDesign / SimulationApprovalsRelated Products

Technical data of IPH-L2-V1

LF RFID read/write device for IDENTControl
Operating frequency125 kHz
Transfer rate2 kBit/s
Sensing range
Read distance1 ... 75 mm
Write distance2 ... 65 mm
Widthmax. 60 mm
UL File NumberE87056
MTBF350 a (Operation at +40 °C)
LED green/yellowgreen: power on
green flashing: read/write attempt performed
yellow: data carrier detected
Power consumptionP0≤ 1.2 W
Supplyfrom the IDENTControl
Radio equipment
Directive 2014/53/EUEN 301489-1
EN 301489-3
EN 300330
EN 62368-1
EN 50364
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000
Degree of protectionEN 60529
RFIDISO/IEC 18000-2
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Degree of protectionIP67
Connectionconnector M12 x 1
Material
HousingPA-GF35
Zinc die cast
Encapsulation compoundFermadur
Installationnon-flush in metal
Distance between two headsMultiplex on: ≥ 60 mm
Multiplex off: ≥ 450 mm
Massapprox. 210 g
Dimensions
Height40 mm
Width40 mm
Length55.5 mm
General Notes

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies