2 axis acceleration sensor, E1-Type approval, Analog output 4 mA ... 20 mA, Fixed evaluation limits , High shock resistance, Teachable zero point, Measuring range -2 g ... +2 g, Increased noise immunity 100 V/mfa
Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa
Not available for purchase: For 8 modules, 24 V DC supply, Supported signal types: DI/DO/AI/TI/AO, Hazardous area: screw terminals, blue, Non-hazardous area: screw terminals, black, Number of modules: 8, Number of channels per module: 2 , 4, Signal type: Universal, Manufacturer: Universal, Control system type: Universalpa
Not available for purchase: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Not available for purchase: 1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V ... 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 30 V DC, Type: 2-wire connection, Type [2]: 3-wire connection, Type [3]: 4-wire connection, Field device: resistance thermometerpa
Not available for purchase: 1-channel signal conditioner, 24 V DC supply (loop powered), Logic input 19 V DC ... 26.5 V DC, non-polarized, Relay contact output for de-energized to safe function, Test pulse immunity, Up to SIL 3 acc. to IEC/EN 61508, Up to PL e acc. to EN/ISO 13849, Housing width: 12.5 mm, Number of channels: 1-channel, DTS function (de-energized to safe), Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC loop powered, Type: 1 x logic inputpa
Not available for purchase: 1-channel signal conditioner, 24 V DC supply (loop powered), Logic input 20 V DC ... 26.5 V DC, non-polarized, Fail-safe relay contact output for de-energized and energized to safe function , Test pulse immunity, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, ETS function (energized to safe), DTS function (de-energized to safe), DPS function (dual pole switching), Safety Integrity Level (SIL): SIL 3pa
Not available for purchase: 1-channel isolated barrier, 24 V DC supply (Power Rail), Potentiometer input, Voltage output 0 V ... 10 V, Lead resistance compensation adjustment, Accuracy 0.05 %, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 35 V DC, Type: 3-wire connection, Type [2]: 4-wire connection, Type [3]: 5-wire connection, Field device: potentiometer, Signal: 1 x 0 ... 10 Vpa
Not available for purchase: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Not available for purchase: 2-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact), Reversible mode of operationpa
Not available for purchase: 1-channel isolated barrier, 24 V DC supply (Power Rail), Potentiometer input, Current output 4 mA ... 20 mA, Lead resistance compensation adjustment, Accuracy 0.05 %, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 35 V DC, Type: 3-wire connection, Type [2]: 4-wire connection, Type [3]: 5-wire connection, Field device: potentiometer, Signal: 1 x 4 ... 20 mApa
Not available for purchase: 1-channel signal conditioner, Universal usage at different power supplies, Input 2-wire and 3-wire transmitters, current and voltage sources, Current and voltage output, Housing width: 20 mm, Number of channels: 1-channel, Rated voltage: 19 ... 90 V DC / 48 ... 253 V AC, Field device: 2-wire transmitter, Field device [2]: 3-wire transmitter, Field device [3]: current source, Signal: 0/4 ... 20 mA, Signal [2]: 0/2 ... 10 V, Signal: 1 x 0/4 ... 20 mA (current source), Signal [2]: 1 x 0/2 ... 10 Vpa
Pepperl+Fuchs' newinductiveIO-Linkdistancesensorsallowconditionmonitoring For the firsttime, they measure the position and velocity of dampingelements and monitorcriticalprocesses ... limitvalue for temperature, operatingtimes, and countersviaIO-LinkHighmeasuringspeed of up to 3m/s for the fastestthroughputtimes and increasedproductivity In-housedevelopment and production with the longestexperience on the market, ensuring ...
The G20controlmodules for motorizedrollershave an application-optimized, slimdesign that allowsdirectinstallation in the mountingrail of the rollerconveyorlineLearn more about the modules and the availableprotocols ... ). The motorcontrolmodulescontrolup to fourMDRs and cansupportboth24V and 48Vmotorizedrollers in one device. A 16-DIO version with 16freelyconfigurabledigitalinputs/outputs is alsoavailable for digitalIOs. Due to the largerdatabandwidth, IO ...
The USi-industryultrasonicsensorsystem is the idealsensorsolution for dustyenvironments, outdoorareas and confinedinstallationspaces ... with cablelengths of up to threemeters, the systemcan be usedveryefficiently in applicationswhereleft/right or forward/reversemovements in a spaceneed to be monitored—on automatedguidedvehicles (AGV), for example. Due to itsrobustdesign ...
Pepperl+Fuchs' WILSENvalve and WILSENnode are wirelessM+Osensorsolutions for myriadIoT use cases ... to the higher-levelsystem. FindOurWILSEN.valveProductsHereDepending on the application or valvetype, the Pepperl+Fuchsportfolioincludesdifferenttypes of inductiveNAMUR or 2-wirelow-powerDCsingle and dualsensors. The sensors are connected ...
Discoverhighlyrobust and reliablesensors, systems, and solutions that withstand the adverse conditions in the miningindustry ... the presence of the watertruck. The robustF192RFIDread/writedevice then identifies the vehiclevia a UHFtag , whichcan be attacheddirectly to the metaltank. The measuredvalues are forwarded to the flowtransmittervia the RFIDevaluationunit ...
From the batterycell to the batterymodule to the batterypack: Pepperl+Fuchsofferspowerfulsensortechnology for automatedbatteryproduction ... sensorsolutions for yourproductionprocess. For example, the visionsensorSmartRunnerExplorer3-Dgenerates a high-resolution3-Dpointcloud of the batterymodule. This datacan be analyzedusingpatternrecognitionalgorithms, enablingfully ...
Interfacetechnology from Pepperl+Fuchsoffers a widerange of components and solutions for hazardousareaapplications in processíndustries ... are subject to SIL3requirements. SIL3currentdrivers for intrinsicallysafesignalsmakecomplexworkaroundsimplementingredundancyviatwoSIL2controlcircuits a thing of the past. MainApplicationsThermalPowerPlants: Direction of Rotation ...
The WCS is designed for applications with extremeambient conditions or especiallylongdistances ... PositionEncodingSystem | WCSWCSBenefitsModularDesignWCSVarietiesCodeRails and ID-PadsMountingSystemsApplicationsContact The absolutebenchmark. Provensystem with maximumprecision – even in extremeweather, dirt, and harsh ...
Learn more about the safeabsolutelinearpositioningsystems from Pepperl+Fuchs for safetyapplicationsup to SIL3 and PLe ... , and mechanicalstress. The safeWCS/PUSpositioningsystemmakessafeabsolutepositioningup to SIL3/PLeeven in such harshenvironmental conditions possible. With itsrobustoutdoorprotectivehousing with IP69degree of protection, it is sealedagainst ...
Get an overview of Pepperl+Fuchs' broadportfolio of HMIsystems for processindustries ... includesHMIsystems, panel and boxPCs. The modularityallowsthinclient and displayunits or powersupplies to be easilyreplaceddirectly in the field. VisuNetFLXEdge The VisuNetFLXEdgeseriesprovidesusers with an all-weatheroperatorstation ...
1-10/935Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.
+44 161 6336431