Vibration sensor VIM62PP-E1V32-0NE-I420K54

Extended temperature range
Screw-in thread for simple installation
Simple electrical commissioning
Rugged stainless steel housing
Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
Suitable for use in harzadous area up to Zone 1/21 with type of protection explosionproof enclosure

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of VIM62PP-E1V32-0NE-I420K54

Product Description
Vibration sensor with analog current output, increased temperature resistance, suitable up to Zone 1/21 with type of protection explosionproof enclosure

General specifications
Type		Vibration sensor
Measuring technology		MEMS
Series		Performance Plus Line
Measured variable		Vibration velocity
Measuring range
	Vibration velocity	0 ... 32 mm/s
Measurement accuracy		± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s
Cross-sensitivity		< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
Frequency range		10 ... 1000 Hz
Averaging time		for v-rms: 2 s
Electrical specifications
Fusing		external fuse is required: 3 A , semi-time-lag , 30 V DC
Operating voltage		10 ... 30 V DC
Current consumption		max. 25 mA
Power consumption		max. 750 mW
Time delay before availability		10 s (rms filter is calculated intially with measurement data before they are available at the output)
Surge protection		up to 2 kV
Output 1
Output type		analog output, current output of the vibration variable
Output current		4 ... 20 mA
Load resistor		≤ 500 Ω
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67
Shock resistance		DIN EN 60068-2-27, 60 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz
Vibration evaluation		DIN ISO 10816/20816
Approvals and certificates
IECEx approval
	Equipment protection level Gb	IECEx CSAE 22.0042X
	Equipment protection level Db	IECEx CSAE 22.0042X
ATEX approval
	Equipment protection level Gb	CSANe 21 ATEX 1074 X
	Equipment protection level Db	CSANe 21 ATEX 1074 X
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Measuring head temperature		-40 ... 125 °C (-40 ... 257 °F) directly at the mounting point
Storage temperature		-40 ... 60 °C (-40 ... 140 °F)
Mechanical specifications
Connection type		cable
Housing material		Stainless steel 1.4305 / AISI 303
Degree of protection		IP66 / IP67 only in connected state
Cable
	Number of cores	4
	Core cross section	0.34 mm²
	Length	5 m
	Tension force	max. 80 N (tensile loading directly at the cable, not at the metal conduit if attached)
Mass		460 g
Dimensions
	Length	82.35 mm
	Diameter	31 mm
General information
Use in the hazardous area		see instruction manuals Only use accessories specified by the manufacturer.

Classifications

System	Classcode
ECLASS 13.0	27271103
ECLASS 12.0	27201406
ECLASS 11.0	27201406
ECLASS 10.0.1	27201406
ECLASS 9.0	27201406
ECLASS 8.0	27201406
ECLASS 5.1	27201406
ETIM 9.0	EC004309
ETIM 8.0	EC004309
ETIM 7.0	EC002959
ETIM 6.0	EC002959
ETIM 5.0	EC001758
UNSPSC 12.1	41114624

Details: VIM62PP-E1V32-0NE-I420K54

Function

The vibration sensor determines the vibration quantity using rms (root meas square) averaging. This form of quadratic averaging or pre-filtering enables precise trend statements about the condition of the application.

The sensor’s design is impressively robust against tough environmental conditions.

The stainless steel housing provides optimal protection against corrosion. The wide temperature range of the sensor enables reliable measured values even in harsh conditions.

Furthermore there is an approval for the use of the sensor in hazardous areas.

The simple mounting allows for commissioning in any application.

Informative Literature: VIM62PP-E1V32-0NE-I420K54

Literature	Language	File Type	File Size
Product Overview - Vibration Sensors	ENG	PDF	1351 KB

Product Documentation: VIM62PP-E1V32-0NE-I420K54

Safety and Security Documentation	Language	File Type	File Size
Instruction manual	ENG	PDF	156 KB
Manuals
Manual VIM6*-Vibration Sensors	ENG	PDF	2498 KB

Design / Simulation: VIM62PP-E1V32-0NE-I420K54

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	899 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	117 KB

Approvals: VIM62PP-E1V32-0NE-I420K54

Certificates	Certificate No.	Language	File Type	File Size
Europe CSA ATEX Category 2	CSANe 22 ATEX 1074 X	ALL	PDF	1221 KB
Worldwide IECEx Certificate of Conformity	IECEx CSAE 22.0042X	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-6808	ALL	PDF	332 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6850	ALL	PDF	326 KB

Associated Products: VIM62PP-E1V32-0NE-I420K54

Accessories

	MONAD-M08-1,25-M08-1,25K/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 19.5fa

	RSL6-CS-SC-M55P200 Protective rubber sleeve
	Protective rubber sleeve for VIM6* vibration sensors against ingress of moisture and mechanical effectsfa

	MONAD-M08-1,25-M10-1,5/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa

	MONAD-M08-1,25-M30-3,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M30 x 3.5, screw-in depth 45fa

	MONAD-M08-1,25-1,2Z-BSPT/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread NPT1/2", screw-in depth 24fa

	EMCAD-M08-1,25-M08-1,25/36 Mounting adapter
	EMC adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 8fa

	MEC-VIM6-V4A-1.5 Flexible metal conduit
	Flexible metal conduit 1.5 m for VIM6 vibration sensorsfa

	MEC-VIM6-V4A-4.5 Flexible metal conduit
	Flexible metal conduit 4.5 m for VIM6 vibration sensorsfa

	MEC-VIM6-V4A-9.5 Flexible metal conduit
	Flexible metal conduit 9.5 m for VIM6 vibration sensorsfa

	MONAD-M08-1,25-M06-1,0/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M6 x 1.0, screw-in depth 10fa

	MONAD-M08-1,25-M16-2,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M16 x 2.0, screw-in depth 27fa

	MONAD-M08-1,25-M20-2,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M20 x 2.5, screw-in depth 34fa

	MONAD-M08-1,25-M24-3,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M24 x 3.0, screw-in depth 40fa

	MAGAD-M08-1,25-MAG/36 Magnetic adapter
	Magnetic adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, holding force 35 kgfa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs GB Ltd.
77 Ripponden Road
Oldham OL1 4EL, Lancs.
United Kingdom
sales@gb.pepperl-fuchs.com
phone +44 161 6336431

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.