Serviceline Industrial Sensors
Sales phone: 0161 622 6308
Tech phone: 0161 622 6311
Fax: 0161 624 6537
Serviceline Explosion Protection
Sales phone: 0161 622 6309
Tech phone: 0161 622 6313
Fax: 0161 624 6537

Inductive sensor NBB7-F104M-A2-200MM-V1

NBB7-F104M-A2-200MM-V1
  • 7 mm flush
  • 4-wire DC
  • Metal housing

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NBB7-F104M-A2-200MM-V1

General specifications
Switching functioncomplementary
Output typePNP
Rated operating distance7 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 5.6 mm
Reduction factor rAl 0.30 - 0.45
Reduction factor rCu 0.25 - 0.45
Reduction factor r304 0.60 - 1.00
Reduction factor rSt37 1
Output type4-wire
Nominal ratings
Operating voltage10 ... 30 V DC
Switching frequency150 Hz
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 2.5 V
Operating current200 mA
Off-state current≤ 80 µA
No-load supply current≤ 15 mA
Switching state indicatorLED
Compliance with standards and directives
Standard conformity
StandardsIEC / EN 60947-5-2:2004
Approvals and certificates
UL approvalcULus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeCable connector M12 x 1 , 4-pin with PUR cable 200 mm
Core cross section0.14 mm2
Housing materialGD-Zn
Sensing facePA 12
Degree of protectionIP67
Dimensions
Height8 mm
Width20 mm
Length32 mm

Classifications

SystemClasscode
ECLASS 13.027274001
ECLASS 12.027274001
ECLASS 11.027270101
ECLASS 10.0.127270101
ECLASS 9.027270101
ECLASS 8.027270101
ECLASS 5.127270101
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: NBB7-F104M-A2-200MM-V1

Design / Simulation: NBB7-F104M-A2-200MM-V1

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP176 KB
CAD Portal / CAD PortalALLLINK---

Approvals: NBB7-F104M-A2-200MM-V1

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
Canada USA UL Ordinary LocationE87056ALLPDF443 KB
China Information on CCCCCC-Exempt Declaration (Pepperl+Fuchs)ALLPDF457 KB

Associated Products: NBB7-F104M-A2-200MM-V1

Accessories
Female cordset single-ended M12 straight A-coded, 4-pin, PVC cable black, UL approvedfa
Female cordset single-ended M12 angled A-coded, 4-pin, PVC cable black, UL approvedfa

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.