Read head WCS3B-LS710HS

EtherCAT interface
Non-contact, absolute position encoder
Automatic detection of dirt accumulation
Speed transfer
Extended temperature range

Technical Data
Product Documentation
Design / Simulation
Approvals
Software
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of WCS3B-LS710HS

Product Description
Read head with EtherCAT interface

General specifications
Sampling rate		1.5 ms
Passage speed		≤ 12.5 m/s
Measuring length		max. 314.5 m
Free tolerances to code rail		horizontal: 31 mm ( ± 15.5 mm ) vertical: 28 mm ( ± 14 mm )
Resolution		± 0.4 mm (1,250 positions/m)
Functional safety related parameters
MTTF_d		74 a
Mission Time (T_M)		10 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
LED indication		Status indication Green: code rail detected, normal function Red: system error Flashing red: no code rail detected
LED ERROR		Error status (red) see manual for coding
LED RUN		Off: init Flashing (green): pre-operational Single flash (green): safe-operational On (green): operational
LED Link/Act		Port status (green)
Electrical specifications
Operating voltage		10 ... 30 V DC
Power consumption		18 W
Interface
Interface type		Ethernet ; 100 BASE-TX
Data output code		binary code
Protocol		EtherCAT®
Transfer rate		100 MBit/s
Output
Output velocity		switching output short-circuit protected
Switching voltage		Operating voltage
Load current		max. 25 mA
Standard conformity
Emitted interference		EN 61000-6-4:2007+A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		EN 60068-2-27:2009
Vibration resistance		EN 60068-2-6:2008
Approvals and certificates
CSA approval		cCSAus Certified, General Purpose Class 2 power source
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Operating temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		8-pin, M12 x 1 connector socket, Y-coded
Cable gland		Max. tightening torque of the cap nut: ≤ 0.4 Nm
Degree of protection		IP54
Material
	Housing	ABS , PC (Polycarbonate)
Mass		500 g
Dimensions
	Height	99 mm
	Width	90 mm
	Length	115 mm
General information
Ordering information		Mounting plate included with delivery

Classifications

System	Classcode
ECLASS 13.0	27270918
ECLASS 12.0	27270918
ECLASS 11.0	27270701
ECLASS 10.0.1	27270701
ECLASS 9.0	27270701
ECLASS 8.0	27270701
ECLASS 5.1	27270701
ETIM 9.0	EC001852
ETIM 8.0	EC001852
ETIM 7.0	EC001852
ETIM 6.0	EC001852
ETIM 5.0	EC001852
UNSPSC 12.1	41111945

Details: WCS3B-LS710HS

Product Documentation: WCS3B-LS710HS

Manuals	Language	File Type	File Size
Manual WCS Electrical	ENG	PDF	11790 KB
Manual WCS Mechanical	ENG	PDF	12338 KB

Design / Simulation: WCS3B-LS710HS

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	2923 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: WCS3B-LS710HS

Certificates	Certificate No.	Language	File Type	File Size
Canada USA CSA Ordinary Location	1007121	ALL	PDF	198 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0909F	ALL	PDF	87 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6636A	ALL	PDF	84 KB

Software: WCS3B-LS710HS

Device Description Files/Drivers	Release Info	File Type	File Size
ESI-file for WCS3B-LS710x / ESI-Datei für WCS3B-LS710x	09/2021	ZIP	3 KB

Associated Products: WCS3B-LS710HS

Accessories

	WCS3B-PL2 Protective case
	Transparent protective case and seal for WCS3B readerfa

	WCS-MP1 WCS accessories
	Mounting plate for reading heads WCS2 and WCS3, Universal mounting plate for all reading heads WCS2... and WCS3...fa

	V45-GP Male connector, field-attachable
	Male connector RJ45 straight 4-pin, Cat5, shielded, field-attachable, insulation displacement connection, Outdoorfa

	V15S-W-ABG-PG9 Male connector, field-attachable
	Male connector M12 angled A-coded 5-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

	V15S-G-ABG-PG9 Male connector, field-attachable
	Male connector M12 straight A-coded 5-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

	V19SY-Y-V1D/V1S Y-Splitter
	Y-Splitter M12 plug 8-pin Y-coded to M12 socket 4-pin D-coded / M12 plug 4-pin A-codedfa

	V19SY-G-BK5M-PUR-ABG Cable connector, Ethernet
	Ethernet bus cable male cordset single-ended M12 straight Y-coded 8-pin, PUR cable black, Cat5e, shielded, drag chain suitablefa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs GB Ltd.
77 Ripponden Road
Oldham OL1 4EL, Lancs.
United Kingdom
sales@gb.pepperl-fuchs.com
phone +44 161 6336431

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.