Serviceline Industrial Sensors
Sales phone: 0161 622 6308
Tech phone: 0161 622 6311
Fax: 0161 624 6537
Serviceline Explosion Protection
Sales phone: 0161 622 6309
Tech phone: 0161 622 6313
Fax: 0161 624 6537
DTM collection DTM HART Loop converter
- Device DTM
- For HART Loop Converters
- Frame application, like e. g. PACTware, must be installed separately
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of DTM HART Loop converter
| Product Description |
|---|
| Device type manager (DTM) for HART communication |
| General specifications | ||
|---|---|---|
| Description | Collection of all device- and communications-DTMs for parameterization of HART Loop Converters (KFD2-HLC-Ex1.*) | |
| Interface | ||
| Connection | Adapter with USB Interface | |
| Software | ||
| Hardware requirements | - processor min. 500 MHz - working memory: min. 256 MB - hard disk space: min. 200 MB - graphic resolution 1024 x 768 Depending on the complexity of the project and the DTMs used, the memory requirement may be several times higher. |
|
| Software requirements | operating system: - Microsoft Windows 7, Windows 8 or Windows 10 internet browser: - Microsoft Internet Explorer 4.0 or higher software components for installation - Microsoft .Net Framework 3.5 or higher - FDT framework program PACTware 5.X - the application-specific device type manager |
|
| Languages | German, English, French, Spanish, Russian can be selected | |
| Licensing | The Pepperl+Fuchs DTM-Collections can be downloaded separately or altogether in a version with basic license. This version can also be obtained on CD-ROM from Pepperl+Fuchs. Basic license: The software remains a basic version after installation under the terms of a basic license that may have limited features. The basic license is delivered free of charge. Full license: The full license can only be activated by an individual license key number and transfers a basic version of software to a full version under the term of a full license. The software under these terms can be installed on more than one workstation simultaneously. The full licenses with the functionality quoted in the following can be ordered at Pepperl+Fuchs. |
|
| Installation | Administrator rights are required For installation in Windows. | |
| Configuration | ||
| Representation of the system configuration | Graphic representation of all communication and device type managers in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be opened simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously. | |
| System planning, application processing | Generation of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242505 |
| ECLASS 12.0 | 27242502 |
| ECLASS 11.0 | 27242502 |
| ECLASS 10.0.1 | 27242502 |
| ECLASS 9.0 | 27242502 |
| ECLASS 8.0 | 27242502 |
| ECLASS 5.1 | 27242502 |
| ETIM 9.0 | EC000757 |
| ETIM 8.0 | EC001416 |
| ETIM 7.0 | EC001416 |
| ETIM 6.0 | EC001416 |
| ETIM 5.0 | EC000809 |
| UNSPSC 12.1 | 43232901 |
Details: DTM HART Loop converter
Function
-
Based on FDT technology
-
Device Type Manager (DTMs) available for all Pepperl+Fuchs devices and systems
-
Commissioning, configuration and parameter assignment independent of the process control system
-
Communication DTMs available for serial interfaces and fieldbus systems
-
Maintenance, diagnostics and error correction
-
In accordance with VDI/VDE 2187
Product Documentation: DTM HART Loop converter
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Installation Instructions | ENG | 99 KB | |
| Manuals | |||
| Installation and configuration guide Device Type Manager (DTM) | ENG | 8665 KB | |
Software: DTM HART Loop converter
| Device Description Files/Drivers | Release Info | File Type | File Size |
|---|---|---|---|
| DTM Collection HART Loop Converter / DTM Collection HART Loop Converter | 1.0.6.0 | ZIP | 13857 KB |
Associated Products: DTM HART Loop converter
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs GB Ltd.
77 Ripponden Road
Oldham OL1 4EL, Lancs.
United Kingdom
sales@gb.pepperl-fuchs.com
+44 161 6336431
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.