Ultrasonic sensor UC2000-30GM-E6R2-V15-Y70135511

Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
2 programmable switch outputs
Synchronization options
Adjustable acoustic power and sensitivity
Temperature compensation
Customer-specific configuration

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of UC2000-30GM-E6R2-V15-Y70135511

Product Description
Single head system

General specifications
Sensing range		80 ... 2000 mm
Adjustment range		120 ... 2000 mm
Dead band		0 ... 80 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 180 kHz
Response delay		65 ms minimum 195 ms factory setting
Indicators/operating means
LED green		solid: Power-on flashing: Standby mode or program function object detected
LED yellow 1		solid: switching state switch output 1 flashing: program function
LED yellow 2		solid: switching state switch output 2 flashing: program function
LED red		solid: temperature/program plug not connected flashing: fault or program function object not detected
Temperature/teach-in connector		Temperature compensation , Switch points programming , output function setting
Electrical specifications
Operating voltage		10 ... 30 V DC , ripple 10 %_SS
No-load supply current		≤ 50 mA
Interface
Interface type		RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit
Input/Output
Synchronization		bi-directional 0 level -U_B...+1 V 1 level: +4 V...+U_B input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms
Synchronization frequency
	Common mode operation	max. 30 Hz
	Multiplex operation	≤ 30 Hz / n , n = number of sensors , n ≤ 5
Output
Output type		2 switch outputs PNP, NO/NC, programmable
Rated operating current		200 mA , short-circuit/overload protected
Voltage drop		≤ 2.5 V
Repeat accuracy		≤ 0.1 % of full-scale value
Switching frequency		≤ 2.5 Hz
Range hysteresis		1 % of the adjusted operating range (default settings), programmable
Temperature influence		≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation)
Compliance with standards and directives
Standard conformity
	Standards	EN IEC 60947-5-2:2020 IEC 60947-5-2:2019
	Fire protection	requirements of hazard level 1 to 3 (HL1 - HL3) according to DIN EN 45545-2:2016-02 and DIN EN 45545-2:2020-10
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 5-pin
Degree of protection		IP65
Material
	Housing	stainless steel (1.4305 / AISI 303) PBT plastic parts
	Transducer	epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass		140 g
Dimensions
	Length	94 mm
	Diameter	30 mm
Factory settings
Output 1		near switch point: 150 mm far switch point: 2000 mm output function: Window mode output behavior: Normally open (NO)
Output 2		near switch point: 150 mm far switch point: 2000 mm output function: Window mode output behavior: Normally open (NO)

Classifications

System	Classcode
ECLASS 13.0	27272803
ECLASS 12.0	27272803
ECLASS 11.0	27272803
ECLASS 10.0.1	27272803
ECLASS 9.0	27272803
ECLASS 8.0	27272803
ECLASS 5.1	27272803
ETIM 9.0	EC001849
ETIM 8.0	EC001849
ETIM 7.0	EC001849
ETIM 6.0	EC001849
ETIM 5.0	EC001849
UNSPSC 12.1	41111960

Details: UC2000-30GM-E6R2-V15-Y70135511

Informative Literature: UC2000-30GM-E6R2-V15-Y70135511

Literature	Language	File Type	File Size
Application Report - Rugged Collision Protection for Cleaning Robots	ENG	PDF	313 KB

Product Documentation: UC2000-30GM-E6R2-V15-Y70135511

Safety and Security Documentation	Language	File Type	File Size
Instruction manual	ENG	PDF	150 KB

Design / Simulation: UC2000-30GM-E6R2-V15-Y70135511

CAE	Language	File Type	File Size
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	68 KB

Approvals: UC2000-30GM-E6R2-V15-Y70135511

Declaration of Conformity	Certificate No.	Language	File Type	File Size
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-5635	ALL	PDF	48 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5637	ALL	PDF	64 KB

Associated Products: UC2000-30GM-E6R2-V15-Y70135511

Accessories

	BF 30 Mounting flange
	Mounting flange, 30 mmfa

	BF 5-30 Mounting flange
	Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa

	V15-G-2M-PVC Female cordset
	Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa

	BF 30-F Mounting flange
	Plastic mounting adapter, 30 mmfa

	ULTRA3000 Service program
	Software for ultrasonic sensors, comfort linefa

	UVW90-M30 Ultrasonic -deflector
	Ultrasonic -deflector, Universal mounting possibilities, 90° sound deflection for difficult installation circumstances, Focussing effectfa

	UVW90-K30 Ultrasonic -deflector
	Ultrasonic -deflector, Clamp mounting, 90° sound deflection for difficult installation circumstances, Universal Orientationfa

	M30K-VE Mounting aid
	Plastic nuts with centering ring for the vibration-free mounting of cylindrical sensors, For insulated mountingfa

	UC-30GM-R2 Interface cable
	fa

General Notes Relating to Pepperl+Fuchs Product Information

Reliable Safeguarding in Accordance with Category 3 PL d

The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.

Free Downloads: Technology Guides Ultrasonic Sensors

Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.

Pepperl+Fuchs GB Ltd.
77 Ripponden Road
Oldham OL1 4EL, Lancs.
United Kingdom
sales@gb.pepperl-fuchs.com
phone +44 161 6336431

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.