Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Product Description |
---|
Evaluation unit exclusively for the ultrasonic sensor system USi-safety |
General specifications | ||
---|---|---|
Type | USi-safety evaluation unit | |
Sensing range | 1 ... 250 cm typ. 200 cm |
|
Adjustment range | 1 ... 250 cm | |
Dead band | 1 cm | |
Object size | typ. ∅ 1 cm | |
Transducer frequency | typ. 103 kHz | |
Resolution | 1 cm | |
Target velocity | axial (max.): typ. 2 m/s (up to 2.5 m/s) | |
Repeat accuracy | ± 0 cm | |
Hysteresis | typ. 0 cm (0 up to SP1/10) | |
Temperature influence | automatic or manual temperature compensation available , without temperature compensation: 0.17 %/K |
|
Functional safety related parameters | ||
Performance level (PL) | PL d | |
Category | Cat. 3 | |
Reaction time | typ. 100 ms ( 99 ... 660 ms ) | |
Recovery time | typ. 990 ms ( 330 ... 3300 ms ) | |
MTTFd | 316 a | |
Diagnostic Coverage (DC) | 87 % | |
Electrical specifications | ||
Fusing | 2 A , slow | |
Operating voltage | 21 ... 28 V DC typ. 24 V DC |
|
No-load supply current | ≤ 150 mA | |
Power consumption | max. 3.6 W | |
Interface | ||
Interface type | USB 2.0 | |
Inputs | ||
Input type | 2 inputs for ultrasonic transducers 1 input for temperature sensor |
|
Output 1 | ||
Output type | safety output OSSD Normally closed, Power FET PNP OSSD 1.1 and OSSD 1.2 |
|
Switching voltage | max. UB | |
Switching current | 150 mA per output | |
Output 2 | ||
Output type | safety output OSSD Normally closed, Power FET PNP OSSD 2.1 and OSSD 2.2 |
|
Switching current | 150 mA per output | |
Output 3 | ||
Output type | Normally open/normally closed switchable, Power FET PNP signal output OUT1 |
|
Switching voltage | max. UB | |
Switching current | 150 mA | |
Output 4 | ||
Output type | Normally open/normally closed switchable, Power FET PNP signal output OUT2 |
|
Switching voltage | max. UB | |
Switching current | 150 mA | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | IEC 60947-5-2 IEC 60204-1 EN ISO 13849 IEC 61326-3-1:2007 IEC/CISPR 11 group 1, class A |
|
Approvals and certificates | ||
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -30 ... 50 °C (-22 ... 122 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug | |
Degree of protection | IP65 | |
Connection | for power supply and outputs: connector plug M12, 8-pin, connection line max. 30 m for temperature sensor: socket M8, 6-pin for ultrasonic transducer: for each socket M8, 3-pin for parameterization: socket Mini USB |
|
Material | ||
Housing | diecast aluminum | |
Mass | 450 g | |
Dimensions | ||
Height | 41 mm | |
Width | 91 mm | |
Length | 125 mm | |
Factory settings | ||
Default setting | See the original instructions |
System | Classcode |
---|---|
ECLASS 13.0 | 27272803 |
ECLASS 12.0 | 27272803 |
ECLASS 11.0 | 27272803 |
ECLASS 10.0.1 | 27272803 |
ECLASS 9.0 | 27272803 |
ECLASS 8.0 | 27272803 |
ECLASS 5.1 | 27272803 |
ETIM 9.0 | EC001849 |
ETIM 8.0 | EC001849 |
ETIM 7.0 | EC001849 |
ETIM 6.0 | EC001849 |
ETIM 5.0 | EC001849 |
UNSPSC 12.1 | 41111960 |
Literature | Language | File Type | File Size |
---|---|---|---|
Product Information - Ultrasonic Sensor Systems USi®-industry and USi®-safety | ENG | 1781 KB | |
Application Report - Driverless and Safe Through the Logistics Center | ENG | 327 KB | |
Application Report - Reliable Lateral Protection for Autonomous Transport of Large Tanks | ENG | 304 KB | |
Application Report - Ultrasonic Sensors for Automated Guided Transport Systems Keep Personnel Safe | ENG | 375 KB |
Safety and Security Documentation | Language | File Type | File Size |
---|---|---|---|
Instruction manual | ENG | 153 KB | |
Original instructions USi-safety | ENG | 4972 KB |
CAD | Language | File Type | File Size |
---|---|---|---|
3-D model with sound geometry (at factory defaul settings and room temperature) / 3-D-Modell mit Schallgeometrie (bei Werkseinstellung und Raumtemperatur) | ALL | STP | 2211 KB |
CAD 3-D / CAD 3-D | ALL | STP | 123 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
Certificates | Certificate No. | Language | File Type | File Size |
---|---|---|---|---|
Worldwide SIBE Functional Safety Certificate | No. 1492 | ALL | 2163 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5003 | ALL | 45 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6535 | ALL | 64 KB |
Software Tools | Release Info | File Type | File Size |
---|---|---|---|
Parameterization software for USi-safety / Parametriersoftware für USi-safety | 2023-01 | ZIP | 8643 KB |
Matching System Components | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Accessories | ||||||
|
||||||
|
||||||
|