Ultrasonic sensor UC2000-L2-E6-V15-Y70103910

Sensor head bidirectional and rotatable
Function indicators visible from all directions
Quick mounting bracket
Selectable sound lobe width
Programmable
Extended temperature range

Technical Data
Product Documentation
Approvals
Software
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of UC2000-L2-E6-V15-Y70103910

Product Description
Single head system

General specifications
Sensing range		60 ... 2000 mm
Adjustment range		80 ... 2000 mm
Dead band		0 ... 60 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 175 kHz
Nominal ratings
Response delay		minimum: 60 ms factory setting: 120 ms
Time delay before availability		≤ 1600 ms
Indicators/operating means
LED green		Operating display
LED yellow 1		switching state switch output 1
LED yellow 2		switching state switch output 2
LED red		error
Electrical specifications
Operating voltage		10 ... 30 V DC , ripple 10 %_SS
No-load supply current		≤ 50 mA
Interface
Interface type		Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit
Input/Output
Input/output type		1 synchronization connection, bidirectional
	0 Level	0 ... 1 V
	1 Level	4 V ... U_B
	Input impedance	> 12 kΩ
	Output current	< 12 mA
	Pulse length	0.5 ... 300 ms (level 1)
	Pulse interval	≥ 33 ms (level 0)
Synchronization frequency
	Common mode operation	≤ 30 Hz
	Multiplex operation	≤ 33 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 )
Output
Output type		2 switch outputs PNP, NO/NC, programmable
Rated operating current		200 mA , short-circuit/overload protected
Voltage drop		≤ 2 V
Repeat accuracy		≤ 0.1 % of full-scale value
Switching frequency		≤ 5 Hz
Range hysteresis		programmable , preset to 1 mm
Temperature influence		< 1.5 % of full-scale value
Compliance with standards and directives
Standard conformity
	Standards	EN IEC 60947-5-2:2020 IEC 60947-5-2:2019
Approvals and certificates
UL approval		cULus Listed, Class 2 Power Source
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 5-pin
Degree of protection		IP67
Material
	Housing	PA-GF35
	Transducer	epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass		115 g
Dimensions
	Height	40 mm
	Width	40 mm
	Length	40 mm
Factory settings
Output 1		near switch point: 80 mm far switch point: 2000 mm output function: Window mode output behavior: NO contact
Output 2		near switch point: 150 mm far switch point: 1000 mm output function: Window mode output behavior: NO contact
Beam width		wide
Evaluation procedure		averaging (MxN) M = 5 N = 2
General information
Supplementary information		Switch settings of the external programming adapter: "output load": pull-down "output logic": inv

Classifications

System	Classcode
ECLASS 13.0	27272803
ECLASS 12.0	27272803
ECLASS 11.0	27272803
ECLASS 10.0.1	27272803
ECLASS 9.0	27272803
ECLASS 8.0	27272803
ECLASS 5.1	27272803
ETIM 9.0	EC001849
ETIM 8.0	EC001849
ETIM 7.0	EC001849
ETIM 6.0	EC001849
ETIM 5.0	EC001849
UNSPSC 12.1	41111960

Details: UC2000-L2-E6-V15-Y70103910

Product Documentation: UC2000-L2-E6-V15-Y70103910

Safety and Security Documentation	Language	File Type	File Size
Instruction manual	ENG	PDF	150 KB

Approvals: UC2000-L2-E6-V15-Y70103910

Declaration of Conformity	Certificate No.	Language	File Type	File Size
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-4497A	ALL	PDF	71 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5531	ALL	PDF	64 KB

Software: UC2000-L2-E6-V15-Y70103910

Device Description Files/Drivers	Release Info	File Type	File Size
Customer specific DTM entry / Kundenspezifischer DTM-Eintrag	1.0.0	ZIP	877 KB
DTM for L2 and UMC3000 devices / DTM für Geräte der Serien L2 und UMC3000	1.3.0.0 / 30-07-2022	ZIP	5005 KB
Software Tools
PACTware 4.1 SP6 / PACTware 4.1 SP6	4.1.0.53	ZIP	43327 KB
PACTware 5.0 / PACTware 5.0	5.0.5.31	ZIP	44203 KB

Associated Products: UC2000-L2-E6-V15-Y70103910

Accessories

	V15-G-2M-PVC Female cordset
	Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa

	UC-PROG1-USB Programming adapter
	Programming adapter, USB 2.0 interface, Simple insertion in the sensor connection leadfa

	Microsoft .NET Connection Software
	Software for connecting people, information, systems, and devices, For applications developed using .NET, Required to run PACTwarepa

General Notes Relating to Pepperl+Fuchs Product Information

Reliable Safeguarding in Accordance with Category 3 PL d

The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.

Free Downloads: Technology Guides Ultrasonic Sensors

Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.

Pepperl+Fuchs GB Ltd.
77 Ripponden Road
Oldham OL1 4EL, Lancs.
United Kingdom
sales@gb.pepperl-fuchs.com
phone +44 161 6336431

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.