AS-Interface EMERGENCY STOP button VAA-2E1A-F85A/CB10-S-V1
- Tamper proof according to ISO 13850/EN 418
- Integrated illumination
- TÜV certified
- UL approval
- Self-monitoring force-guided safety contacts
- EMERGENCY STOP unlocking by turning or pulling
- M12 plug connection
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of VAA-2E1A-F85A/CB10-S-V1
| Product Description |
|---|
| AS-Interface EMERGENCY STOP button |
| General specifications | ||
|---|---|---|
| Node type | Safety node | |
| AS-Interface specification | V3.0 | |
| Required gateway specification | ≥ V2.1 | |
| Profile | S-7.B | |
| IO code | 7 | |
| ID code | B | |
| ID1 code | F | |
| ID2 code | 0 | |
| UL File Number | E305142 | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Performance level (PL) | PL e | |
| Category | Cat. 4 | |
| Reaction time | < 300 µs | |
| MTTFd | no significant contribution to MTTFd of the overall system | |
| PFHd | no significant contribution to PFH of the overall system | |
| B10d | 250000 cycles | |
| Design lifetime | 20 a | |
| Indicators/operating means | ||
| Button | ||
| EMERGENCY STOP | illuminated | |
| Electrical specifications | ||
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface | |
| Rated operating current | ≤ 80 mA | |
| Protection class | III | |
| Surge protection | Ue: Over voltage category III, safe isolated power supplies (PELV) | |
| Rated insulation voltage | 32 V | |
| Pulse withstand voltage | 0.8 kV | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | IEC 62026-2:2013 EN 61000-6-2:2005 EN 61000-6-4:2007 A1:2011-02 EN 61326-1:2013 | |
| Machinery Directive | ||
| Directive 2006/42/EC | EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 EN 60947-5-5:1997+A1:2005+A11:2013+A2:2017 | |
| Standard conformity | ||
| Degree of protection | EN 60529:2000 | |
| Electrical safety | IEC 61140:2009 | |
| Emitted interference | EN 61000-6-4:2007 A1:2011-02 | |
| AS-Interface | EN 62026-2:2013 | |
| Noise immunity | IEC 62026-2:2013 EN 61326-3-1:2017 EN 61000-6-2:2005 | |
| Functional safety | EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 EN 60947-5-5:1997+A1:2005+A11:2013+A2:2017 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Relative humidity | 85 % , noncondensing | |
| Climatic conditions | For indoor use only | |
| Altitude | ≤ 5000 m above MSL | |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks | |
| Vibration resistance | 0.35 mm 10 ... 57 Hz , 5 g 57 ... 2000 Hz, 10 cycles | |
| Pollution degree | 2 | |
| Mechanical specifications | ||
| Operating force | Push: 32 N Pull: 21 N Turn: 0.27 Nm Minimum for positive opening operation: 60 Nm |
|
| Operating distance | for positive opening operation: min. 4 mm maximal: 4.5 mm |
|
| Degree of protection | IP65 |
|
| Connection | M12 round connector | |
| Material | ||
| Housing | Polycarbonate | |
| Mass | 225 g | |
| Dimensions | ||
| Height | 91.5 mm | |
| Width | 76 mm | |
| Length | 76 mm | |
| Life span | > 250,000 switching operations | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27371244 |
| ECLASS 12.0 | 27371244 |
| ECLASS 11.0 | 27371244 |
| ECLASS 10.0.1 | 27371244 |
| ECLASS 9.0 | 27371244 |
| ECLASS 8.0 | 27371244 |
| ECLASS 5.1 | 27371228 |
| ETIM 9.0 | EC002034 |
| ETIM 8.0 | EC002034 |
| ETIM 7.0 | EC002034 |
| ETIM 6.0 | EC002034 |
| ETIM 5.0 | EC002034 |
| UNSPSC 12.1 | 39121533 |
Details: VAA-2E1A-F85A/CB10-S-V1
Function
This AS-Interface emergency stop button is a two-channel, positively driven contact, allowing the operation of personnel protection systems when used according to specification along with an AS-Interface safety monitor. It occupies one complete address in the AS-Interface segment.
When the safety monitor is properly configured, up to EN 954-1 Category 4 and IEC 61508 SIL 3 can be achieved.
For mounting, this AS-Interface emergency stop button can be screwed into the front plate of the machine or the switch panel. The button can be illuminated in red.
Design / Simulation: VAA-2E1A-F85A/CB10-S-V1
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 873 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Associated Products: VAA-2E1A-F85A/CB10-S-V1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs GB Ltd.
77 Ripponden Road
Oldham OL1 4EL, Lancs.
United Kingdom
sales@gb.pepperl-fuchs.com
+44 161 6336431
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.