Select Your Country
RFID20-* RFID Reader for Zone 2/22 and Div. 2
Key Benefits at a Glance
- Flexible RFID (125 kHz and 13.56 MHz) reader with NFC capabilities
- Flush mountable for easy integration in VisuNet Systems
- Compatible with LogOnPlus software
- Provides acces to all standard USB operating modes as HID, USB-CCID und USB CDC
Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
EN
- DE
- EN
Technical data of RFID20-*
| RFID Reader/Writer for LF, HF, NFC |
| Type | RFID Reader/Writer for LF, HF, NFC | |
| Operating distance | LF and HF: Up to 76 mm / 3 inch, depending on environment and transponder |
| Power supply | 4.3 V - 5.5 V via USB; via generic interface (X2) 3.3 V ± 5% Limited power source according to the safety norms listed in the respective declaration of conformity, short-circuit current < 8 A |
| Indicators | LED green: power on LED red flashing beeper/buzzer: read/write attempt performed |
| Operation frequency | 125 kHz (LF) / 13.56 MHz (HF) |
| Interface type | USB |
| Explosion protection | |||||
| |||||
| Radio and telecommunication terminal equipment | |||||
| |||||
| RoHS | |||||
| |||||
| Degree of protection | Front side: Non-Ex: IP66 with included front foil, With Ex-certification: IP66 with included front foil Back side: IP20 |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 65 °C (-4 ... 149 °F) | |
| Relative humidity | max. relative humidity 93% at 40°C (non-condensing) according to EN60068-2-78 |
| Material | PEEK housing, anodized aluminum backside | |
| Mass | 300 g | |
| Dimensions | 126 mm x 81 mm x 25 mm | |
| Cut out dimensions | 82 mm x 57 mm | |
| Cable length | 1.8 m / 0.6 m |
| UL approval | |||||||||||
| |||||||||||
| ATEX approval | |||||||||||
| |||||||||||
| IECEx approval | |||||||||||
| |||||||||||