Industrial Communication ICA-IIOT-KIT2G-IO

Experience the benefits of IO-Link
See how simple it is to integrate IO-Link data into your I4.0 strategy
Quick start guide for basic connectivity to the IO-Link master
Detailed instructions for MQTT and OPC UA connectivity
EtherNet/IP interface

Technical Data
Details
Product Documentation
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of ICA-IIOT-KIT2G-IO

Product Description
IIoT Starter Kit with IP67 EtherNet/IP Master

Classifications

System	Classcode
ECLASS 13.0	27242602
ECLASS 12.0	27242602
ECLASS 11.0	27242602
ECLASS 10.0.1	27242602
ECLASS 9.0	27242602
ECLASS 8.0	27242602
ECLASS 5.1	27242602
ETIM 9.0	EC001597
ETIM 8.0	EC001597
ETIM 7.0	EC001597
ETIM 6.0	EC001597
ETIM 5.0	EC001597
UNSPSC 12.1	32151705

Details: ICA-IIOT-KIT2G-IO

Function

Learn how to visualize and analyze sensor data with this IIoT Starter Kit and our simple-to-use IO-Link masters.

Each kit includes the following components to get you started:

An IO-Link master with 8 inputs/outputs
A high-frequency RFID R/W station with IO-Link
Three IO-Link sensors
All the necessary cabling, including an Ethernet bus cable and female cordset
An Ethernet unmanaged switch with 5 RJ45 ports and port alarm
Two RFID transponders
A Pepperl+Fuchs PS1000 power supply (100 VAC to 240 VAC wide range input; output 24 VDC, 5 A, 120 W)

The kit includes a list of protocol details as well as instructions that walk the user through setup and IO-Link master configurations.

Product Documentation: ICA-IIOT-KIT2G-IO

We are sorry, there are no documents for your language selection. Please select another language.

Associated Products: ICA-IIOT-KIT2G-IO

Kit component

	OMT550-R200-2EP-IO-V1 Distance sensor
	Distance sensor, Medium design with versatile mounting options, Space-saving distance sensors in small standardized design, Multi Pixel Technology (MPT) - exact and precise signal evaluation, IO-Link interface for service and process datafa

	ICE2-8IOL-G65L-V1D IO-Link master
	EtherNet/IP IO-Link master with 8 inputs/outputsfa

	V11-G-20M-PVC-V11-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 3-pin, PVC cable greyfa

	V11-G-1M-PVC-V11-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 3-pin, PVC cable greyfa

	V15L-G-2M-PUR-U Female cordset
	Female cordset single-ended M12 straight L-coded, 5-pin, PUR cable grey, UL approvedfa

	V1SD-G-GN2M-PUR-E1S-V45-G Connection cable, Ethernet
	Ethernet bus cable M12 plug straight D-coded to RJ45 Ethernet-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitablefa

	V45-G-C5-GN1,8M-PUR-E1S-V45-G Connection cable, Ethernet
	Ethernet bus cable RJ45 to RJ45 PROFINET-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitablefa

	V45-G-C5-GN0,8M-PUR-E1S-V45-G Connection cable, Ethernet
	Ethernet bus cable RJ45 to RJ45 PROFINET-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitablefa

	V45-G-C5-GN1M-PUR-E1S-V45-G Connection cable, Ethernet
	Ethernet bus cable RJ45 to RJ45 PROFINET-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitablefa

	ICRL2-U-5RJ45-DIN Ethernet switch unmanaged
	Ethernet unmanaged switch with 5 RJ45 ports and extended temperature rangefa

	NRB4-12GS40-E2-IO-V1 Inductive sensor
	Reduction factor 1, magnetic field resistant, Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Rated operating distance: 4 mm (factory setting), Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Switching frequency: 0 ... 2000 Hz (switch point mode) 0 ... 125 Hz (window mode, switch point mode with stability alarm), Type of voltage: DCfa

	PS1000-A6-24.5 Power Supply
	100 V AC to 240 V AC wide-range input, Output 24 V DC, 5 A, 120 W, 1-phase, Housing width 32 mm, Efficiency up to 94.3 %, Minimal inrush current surge, DC OK relay contact, Suitable for Zone 2/Div. 2 mounting, Device type: device for DIN rail mounting, Function: Standard, Rated voltage: 24 V DC, Voltage range: 24 ... 28 V DC factory setting: 24.1 Vpa

	IQT1-F61-IO-V1 RFID read/write device
	HF RFID read/write device with IO-Link in accordance with ISO 15693fa

	IQC21-50 25pcs RFID Transponder
	Data carrierfa

	IQC21-F125 10pcs RFID Transponder
	Data carrierfa

General Notes Relating to Pepperl+Fuchs Product Information

NEW! IIoT Starter Kits for Simple Visualization and Analysis of Sensor Data

Connect your factory floor sensors to the cloud and start your digital transformation with the new IIoT starter kits.

Free Download: White Paper on TCP-Based Communication Protocols (PDF)

This free PDF white paper compares the different TCP-based communication protocols (AMQP, OPC UA, MQTT, REST API) that have found their way up and are considered the enablers of IIoT and Industry 4.0. Get your free download now!

Four Scenarios for Using IO-Link Masters with OPC UA Interface

The ICE 2 and ICE3 IO-Link master series come with an OPC UA interface and a real-time fieldbus protocol, making them an ideal solution for cloud-based applications. Read more about possible scenarios in our blog.

Pepperl+Fuchs GB Ltd.
77 Ripponden Road
Oldham OL1 4EL, Lancs.
United Kingdom
sales@gb.pepperl-fuchs.com
phone +44 161 6336431

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.