6100 series vent EPV-6100-MP-*
- Maximum flow rate of 14,000 l/min
- Intrinsically safe when connected to 6100 control unit
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of EPV-6100-MP-*
| Product Description |
|---|
| 6100 series purge and pressurization enclosure protection vent |
| General specifications | ||
|---|---|---|
| Series | 6100 Series | |
| System | Ex pxb Purge | |
| Hazardous environment | gas | |
| Electrical specifications | ||
| Connection | ||
| Power | Intrinsically safe connection to the 6100 control unit | |
| Signal | 2-wire intrinsically safe pressure switch | |
| Connection | 2-wire | |
| Pneumatic parameters | ||
| Protective gas supply | Clean air or inert gas | |
| Safe pressure | 0.625 mbar [0.25 in wc / 6.4 mm wc) | |
| Enclosure pressure | 0 ... 50 mbar (0 ... 20.1 in wc / 0 ... 510.5 mm wc) | |
| Flow rate for leakage compensation | depends on enclosure seal based on completely sealed enclosure |
|
| Breaking pressure | Approx. 10 mbar (4.0 in wc) Approx. 25 mbar (10.0 in wc) Approx. 30 mbar (12.1 in wc) Approx. 40 mbar (16.1 in wc) Approx. 50 mbar (20.1 in wc) |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 80 °C (-4 ... 176 °F) | |
| Relative humidity | 5 ... 95 %, noncondensing | |
| Vibration resistance | 1 g , 3 ... 150 Hz , all axes | |
| Impact resistance | 30g, 11 ms, all axes | |
| Mechanical specifications | ||
| Material | 316L stainless steel (housing) | |
| Installation | -gravity dependent -air outlet, screen side must be facing down |
|
| Mass | 17 kg (37 lb) | |
| Data for application in connection with hazardous areas | ||
| Certificate | CML 19 ATEX 1425X | |
| Marking |  II2G Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018 EN 60079-1:2014 EN 60079-2:2014 EN 60079-7:2015 EN 60079-11:2012 |
|
| International approvals | ||
| IECEx approval | IECEx CML 19.0156X Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Supplemental Standards : EN 61010-1:2010 |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180591 |
| ECLASS 12.0 | 27180591 |
| ECLASS 11.0 | 27180591 |
| ECLASS 10.0.1 | 27291390 |
| ECLASS 9.0 | 27291390 |
| ECLASS 8.0 | 27291390 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121303 |
Details: EPV-6100-MP-*
Function
The EPV-6100 vent/pressure relief device exhausts excess pressure from the motor/enclosure. The vent's pressure switch monitors the differential pressure across the vent orifice during the purging cycle. The differential pressure is used to determine the flow through the vent. The pressure switch is connected to the 6100 EPCU. It is intrinsically safe through the galvanic isolation barrier within the 6100 EPCU.
Product Documentation: EPV-6100-MP-*
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Instruction manual | ENG | 172 KB | |
| Manuals | |||
| Manual | ENG | 5218 KB | |
Approvals: EPV-6100-MP-*
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Brasil Certificate of Compliance | DNV 24.0062 X | ALL | 421 KB | |
| Europe CML ATEX Certificate II 2 G | CML 19ATEX1425X | ALL | 118 KB | |
| IECEx Certificate of Conformity | IECEx CML 19.0156X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-B0D7C | ALL | 113 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0F6 | ALL | 160 KB | |
Associated Products: EPV-6100-MP-*
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs GB Ltd.
77 Ripponden Road
Oldham OL1 4EL, Lancs.
United Kingdom
sales@gb.pepperl-fuchs.com
+44 161 6336431
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.