Bullet WirelessHART Adapter WHA-BLT-F9D0-N-A0-Z0-Ex1

Installation in Zone 0, 20
Installation in Class I, II, Division 1
Installation in Class III
Installation in Class I, Division 2
Ex i circuits for Ex i field devices
Cast aluminum housing
Loop powered
Direct mounting on HART or 4 mA ... 20 mA field device
Encapsulated antenna
Up to 8 field devices in multidrop

Technical Data
Details
Informative Literature
Product Documentation
Approvals
Software
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of WHA-BLT-F9D0-N-A0-Z0-Ex1

Supply
Rated voltage		7 ... 30 V DC
Rated current		< 1 mA , max. 25 mA
Electrical specifications
Output current		3.2 ... 25 mA
Supply		loop power for field devices voltage: 1 ... 2.5 V DC, adjustable in steps of 0.5 V
Input
Connection		- 5 wires, 600 mm long, exiting from male thread NPT1/2 - 1 external grounding point
HART communication
	Protocol	HART 7.1, backward compatible
	Number of devices	up to 8 HART field devices (depending on installation)
Output
Interface		internal antenna
Communication		WirelessHART specifications - physical layer: IEEE 802.15.4.2006 - frequency band: 2.4 GHz (ISM band, licence free) - maximum transmit power: +10 dBm - outdoor transmission range: 235 m - communication standard: WirelessHART acc. to IEC 62591
Directive conformity
Radio and telecommunication terminal equipment		The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning.
	Directive 2014/53/EU	EN 300 328 V2.1.1:2016 EN 301 489-1 V2.2.0:2017 EN 301 489-17 V3.2.0:2017
	FCC CFR47 Part 15 B and C	ANSI C63.4-2003 , FCC ID: X89-WA1101
Conformity
Degree of protection		IEC 60529:2013
Ambient conditions
Ambient temperature		temperature class T5: -40 ... 85 °C (-40 ... 185 °F) temperature class T6: -40 ... 75 °C (-40 ... 167 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		max. 100 %
Mechanical specifications
Degree of protection		IP67
Material		aluminum alloy with polyurethane enamel paint
Mass		460 g
Dimensions		60.8 x 60.8 x 100 mm (l x w x h)
	Height	100 mm
	Diameter	60.8 mm
Data for application in connection with hazardous areas
EU-type examination certificate		FM 17 ATEX 0046 X
	Marking	II 1G Ex ia IIC T6...T5 Ga II 1D Ex ia IIIC T95°C Da
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012
International approvals
FM approval		FM 17 NUS 0010 FM 17 US 0191 X
	Control drawing	116-0425 (cFMus)
	Approved for	IS Class I, II, III, Division 1, Groups A-G Class I, Zone 0, AEx ia IIC T6...T5 Ga Zone 20, AEx ia IIIC T95°C Da
CSA approval		FM 17 NCA 0004 FM 17 CA 0102 X
	Control drawing	116-0425 (cFMus)
	Approved for	IS Class I, II, III, Division 1, Groups A-G Ex ia IIC T6...T5 Ga Ex ia IIIC T95°C Da associated apparatus [Ex ia]
IECEx approval
	IECEx certificate	IECEx FMG 17.0020X
	IECEx marking	Ex ia IIC T6...T5 Ga , Ex ia IIIC T95°C Da
	Standards	IEC 60079-0:2011 , IEC 60079-1:2014 , IEC 60079-11:2011 , IEC 60079-31:2013
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27219090
ECLASS 12.0	27219090
ECLASS 11.0	27219290
ECLASS 10.0.1	27219290
ECLASS 9.0	27219290
ECLASS 8.0	27219290
ECLASS 5.1	27242692
ETIM 9.0	EC002584
ETIM 8.0	EC002584
ETIM 7.0	EC002584
ETIM 6.0	EC002584
ETIM 5.0	EC002584
UNSPSC 12.1	39121008

Details: WHA-BLT-F9D0-N-A0-Z0-Ex1

Function

The device upgrades a conventional HART or 4 ... 20 mA field device with a WirelessHART interface.

The supply is ensured via loop power. Due to its intrinsically safe circuits, the adapter can be mounted on an intrinsically safe field device or anywhere in the 4 ... 20 mA loop. Up to 8 HART field devices can be connected to each other in multidrop mode. The encapsulated antenna allows for use in harsh environments.

The device can be programmed with a configuration tool easily (DTM or DD).

Informative Literature: WHA-BLT-F9D0-N-A0-Z0-Ex1

Literature	Language	File Type	File Size
Application Report - Outdoor Monitoring of Gas Limit Values	ENG	PDF	158 KB
Application Report - WirelessHART Adapter Bullet Enables More Flexibility for Mobile Mixing Tanks	ENG	PDF	129 KB
Application Report - WirelessHART Connects Mobile Measurement Stations	ENG	PDF	149 KB
Application Report - Wirelessly Networked Tank Farms	ENG	PDF	736 KB

Product Documentation: WHA-BLT-F9D0-N-A0-Z0-Ex1

System Descriptions	Language	File Type	File Size
Patent Information	ENG	PDF	365 KB
Safety and Security Documentation
Instruction manual	ENG	PDF	201 KB
Manuals
Manual	ENG	PDF	2085 KB

Approvals: WHA-BLT-F9D0-N-A0-Z0-Ex1

Certificates	Certificate No.	Language	File Type	File Size
Europe FM ATEX ia 1G ATEX ia 1D	FM 17 ATEX 0046X	ALL	PDF	301 KB
Korea KOSHA	21-AV4BO-00225X	ALL	PDF	442 KB
Control Drawings
Control drawing CSA / Control drawing CSA		ALL	PDF	187 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3836D	ALL	PDF	78 KB

Software: WHA-BLT-F9D0-N-A0-Z0-Ex1

Device Description Files/Drivers	File Type	File Size
DTM WirelessHART Adapter WHA-BLT* "Bullet" / DTM WirelessHART Adapter WHA-BLT* "Bullet"	ZIP	16481 KB
FHX-File WirelessHART Adapter WHA-BLT* "Bullet" / FHX-Datei WirelessHART Adapter WHA-BLT* "Bullet"	ZIP	1115 KB
DD WirelessHART Adapter WHA-BLT* "Bullet" / DD WirelessHART Adapter WHA-BLT* "Bullet"	ZIP	3513 KB

Associated Products: WHA-BLT-F9D0-N-A0-Z0-Ex1

Accessories

	DTM WirelessHART Adapter "Bullet" DTM collection
	Device DTMpa

	AD.....* Adapter
	Adapter male thread metric to female thread metric, Adapter male thread metric to female thread NPT, Metric and NPT versions available, Brass nickel-plated or stainless steel, Ex db, Ex eb and Ex tb certified, Suitable for operation in Zone 1, Zone 2, Zone 21 and Zone 22pa

General Notes Relating to Pepperl+Fuchs Product Information

Quick Links

Pepperl+Fuchs GB Ltd.
77 Ripponden Road
Oldham OL1 4EL, Lancs.
United Kingdom
sales@gb.pepperl-fuchs.com
phone +44 161 6336431

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.