Ultrasonic sensor UCC500-30GH70-IE2R2-K-V15
- Analog output 4 ... 20 mA
- 1 switch output
- Temperature compensation
- Synchronization options
- Can be parameterized via the ULTRA-PROG-IR software and interface (accessories)
- High chemical resistance through FEP coated transducer surface
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of UCC500-30GH70-IE2R2-K-V15
| Product Description |
|---|
| Ultrasonic diffuse sensor with separate transducer |
| General specifications | ||
|---|---|---|
| Sensing range | 45 ... 500 mm | |
| Adjustment range | 50 ... 500 mm | |
| Dead band | 0 ... 45 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 300 kHz | |
| Response delay | ≤ 60 ms | |
| Nominal ratings | ||
| Temperature drift | ≤ ± 1.5 % of full-scale value | |
| Time delay before availability | ≤ 85 ms | |
| Limit data | ||
| Permissible cable length | max. 300 m | |
| Indicators/operating means | ||
| LED yellow | switching state switch output | |
| LED green/yellow | yellow: object in evaluation range green: Teach-In |
|
| Potentiometer | switching output adjustable | |
| Electrical specifications | ||
| Rated operating voltage | 24 V DC | |
| Operating voltage | 20 ... 30 V DC (including ripple) | |
| Ripple | ≤ 10 % | |
| No-load supply current | ≤ 50 mA | |
| Interface | ||
| Interface type | Infrared | |
| Mode | point-to-point connection | |
| Input/Output | ||
| Input/output type | 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input | |
| 0 Level | ≤ 3 V | |
| 1 Level | ≥ 15 V | |
| Input impedance | typ. 900 Ω | |
| Number of sensors | max. 10 | |
| Switching output | ||
| Output type | 1 switch output PNP, NO ( NC contact programmable ) | |
| Default setting | 50 ... 500 mm ( adjustable via potentiometer ) | |
| Repeat accuracy | ± 0.5 mm | |
| Operating current | 300 mA , short-circuit/overload protected | |
| Switching frequency | ≤ 5 Hz | |
| Switching hysteresis | 5 mm ( programmable ) | |
| Voltage drop | ≤ 3 V | |
| Off-state current | ≤ 10 µA | |
| Analog output | ||
| Output type | 1 current output 4 ... 20 mA , ascending/descending programmable | |
| Default setting | rising ramp ; evaluation limit A1: 50 mm ; evaluation limit A2: 500 mm | |
| Load resistor | ≤ 500 Ω | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
|
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Shock resistance | 30 g , 11 ms period | |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 5-pin | |
| Degree of protection | IP65 | |
| Material | ||
| Housing | Stainless steel 1.4571 / AISI 316Ti plastic PBT | |
| Cable | PVC | |
| Transducer | FEP coated; epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Installation position | any position | |
| Mass | 190 g | |
| Dimensions | ||
| Length | 111.3 mm | |
| Diameter | 30 mm | |
| Construction type | Cylindrical | |
| Cable length | 165 cm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: UCC500-30GH70-IE2R2-K-V15
Product Documentation: UCC500-30GH70-IE2R2-K-V15
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 783 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 150 KB | |
Design / Simulation: UCC500-30GH70-IE2R2-K-V15
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 189 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| EPLAN macro EDZ / EPLAN Makro EDZ | ALL | EDZ | 63 KB |
Approvals: UCC500-30GH70-IE2R2-K-V15
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-US-2140156-4 / UL-CA-2133660-4 | ALL | 284 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2943B | ALL | 50 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5474 | ALL | 43 KB | |
Software: UCC500-30GH70-IE2R2-K-V15
| Software Tools | Release Info | File Type | File Size |
|---|---|---|---|
| Service program ULTRA-PROG-IR / Serviceprogramm ULTRA-PROG-IR | V1.07.02 / 22-12-2022 | ZIP | 2115 KB |
Associated Products: UCC500-30GH70-IE2R2-K-V15
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.
Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.
Pepperl+Fuchs (India) Pvt. Ltd.
Ground Floor, #546/1, Sy. No. 46, 7th Main
4th Phase, Peenya Industrial Estate
Bangalore - 560058
India
info@in.pepperl-fuchs.com
+91 80 4609 6000
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.