Type Y & Z purge and pressurization system 1003
- NFPA 70, NFPA 496, ISA 12.4 standards
- Optional alarm output indicates air lock failure
- Type Y system certified for Class I, Division 1 to Division 2
- Type Z system certified for Class I, Division 2 to nonhazardous
- Enclosure volume up to 75 ft3
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of 1003
| Product Description |
|---|
| 1003 Series purge and pressurization system |
| General specifications | ||
|---|---|---|
| Series | 1003 | |
| System | Type Y Purge , Type Z Purge | |
| Hazardous environment | gas | |
| Electrical specifications | ||
| Connection | Terminal blocks | |
| Output | ||
| Output I | -WPS- | |
| Output type | Switch contacts | |
| Contact loading | 120 VAC @ 15 A | |
| Output II | -WPSA- | |
| Output type | Switch contacts | |
| Contact loading | 120/220 VAC; 24 VDC @ 10 A; 125 VDC @ 50 mA power requirements: 24 / 120 / 240 VDC @ 3 / 4 / 11 watts |
|
| Pneumatic parameters | ||
| Protective gas supply | instrument grade air or inert gas | |
| Pressure requirement | 80 - 120 psi | |
| Safe pressure | Setpoint: 0.25" (6.35 mm) Flow rate: 0.1 - 3.5 SCFH (2.8 - 99 l /hr) |
|
| Operating conditions | ||
| Process conditions | ||
| Capacity and filtration | 3.8 oz @ 40 µ | |
| Exchange pressure | 3" - 5" | |
| Exchange flow rate | 10 SCFM / 600 SCFH (With regulator set to 60 psi min. during exchange) |
|
| Exchange time | 1 min / 2.5 ft3 | |
| Ambient conditions | ||
| Ambient temperature | -29 ... 49 °C (-20.2 ... 120.2 °F) | |
| Mechanical specifications | ||
| Connection type | System supply port: 3/8" FPT Enclosure supply fitting: 3/8" tube fitting Enclosure reference fitting: 1/4" tube fitting Switch conduit port size: 1/2" FPT |
|
| Material | Filter regulator body: zinc w/enamel finish Regulator handle & bowl: polycarbonate Enclosure pressure gauge: alum. w/enamel finish Rapid Exchange® gauge: poly case and brass tube Tube fittings & valves: 316 ss forged body Tubing: 316 ss 1/4" & 3/8" .035 welded System nameplate: silk screened Lexan® & ss Fastener hardware: alum. & stainless steel Mounting plate: 316 14 ga #3 brush ss EXP pressure switch body: anodized cast aluminum Enclosure warning nameplate: silk screened stainless steel |
|
| Mass | 1003-LPS-* 5.4 kg (12 lb) 1003-WPS* 7.7 kg (17 lb) |
|
| International approvals | ||
| FM approval | Type Y LPS: Class I, Division 1, Groups A, B, C, D WPS: Class I, Division 1, Groups C, D WPSA: Class I, Division 1, Groups A, B, C, D Type Z LPS: Class I, Division 2, Groups A, B, C, D WPS: Class I, Division 2, Groups C, D WPSA: Class I, Division 2, Groups A, B, C, D |
|
| UL approval | ||
| cULus | Type Y LPS: Class I, Division 1, Groups A, B, C, D WPS: Class I, Division 1, Groups C, D WPSA: Class I, Division 1, Groups A, B, C, D Type Z LPS: Class I, Division 2, Groups A, B, C, D WPS: Class I, Division 2, Groups C, D WPSA: Class I, Division 2, Groups A, B, C, D |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180508 |
| ECLASS 12.0 | 27180508 |
| ECLASS 11.0 | 27180508 |
| ECLASS 10.0.1 | 27180508 |
| ECLASS 9.0 | 27180508 |
| ECLASS 8.0 | 27180508 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121301 |
Details: 1003
Function
The model 1003 is a Rapid Exchange® purging system that operates on a supply of compressed instrument air or inert gas.
The system regulates and monitors pressure within sealed (protected) enclosure(s), in order to remove and prevent flammable gas or vapor accumulations.
The system accomplishes four air exchanges and maintains a "safe" (0.25") pressure. A Pepperl+Fuchs Model EPV-3 Enclosure Protection Vent is required for proper operation.
This process reduces the hazardous (classified) area rating within the enclosure(s), in accordance with the NEC - NFPA 70, Article 500, NFPA 496 and ISA 12.4.
Product Documentation: 1003
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Installation and Operation Manual: Model 1003 Type Y or Z Rapid Exchange Purging System (USA English) | ENG | 2726 KB |
Approvals: 1003
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada, USA FM | CoC 3018335 | ALL | 433 KB | |
| UL Hazardous Location | E184741 (RFPW, RFPW7) | ALL | 193 KB |
Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!
Pepperl+Fuchs (India) Pvt. Ltd.
Ground Floor, #546/1, Sy. No. 46, 7th Main
4th Phase, Peenya Industrial Estate
Bangalore - 560058
India
info@in.pepperl-fuchs.com
+91 80 4609 6000
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.