Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Product Description |
---|
AS-Interface module for stack light |
General specifications | ||
---|---|---|
Node type | A/B node | |
AS-Interface specification | V3.0 | |
Required gateway specification | ≥ V3.0 | |
Profile | S-7.A.7 | |
IO code | 7 | |
ID code | A | |
UL File Number | E223176 | |
Functional safety related parameters | ||
MTTFd | 300 a | |
Indicators/operating means | ||
LED FAULT | communication error / address is 0; LED red | |
LED AS-i | AS-Interface voltage; LED green | |
LED AUX | ext. auxiliary voltage UAUX ; LED green | |
Electrical specifications | ||
Auxiliary voltage (output) | 20 ... 30 V DC PELV | |
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface | |
Rated operating current | ≤ 235 mA | |
Output | ||
Number/Type | 4 semiconductor relay outputs | |
Supply | from AS-Interface or from external auxiliary voltage as required UAUX | |
Voltage | 21 ... 31 V | |
Current | AS-interface: ≤ 200 mA for the stack light UAUX: ≤ 300 mA per light element |
|
Ambient conditions | ||
Ambient temperature | -20 ... 50 °C (-4 ... 122 °F) | |
Mechanical specifications | ||
Degree of protection | IP65 | |
Connection | Bayonet system | |
Dimensions | ||
Height | 70 mm | |
Diameter | 70 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27242604 |
ECLASS 12.0 | 27242604 |
ECLASS 11.0 | 27242604 |
ECLASS 10.0.1 | 27242604 |
ECLASS 9.0 | 27242604 |
ECLASS 8.0 | 27242604 |
ECLASS 5.1 | 27242604 |
ETIM 9.0 | EC001599 |
ETIM 8.0 | EC001599 |
ETIM 7.0 | EC001599 |
ETIM 6.0 | EC001599 |
ETIM 5.0 | EC001599 |
UNSPSC 12.1 | 39121535 |
The signal column module VBA-4A-70MM is an AS-Interface module with 4 virtually wearproof semiconductor relay outputs which can trigger up to 4 stages of a signal column.
The connection of the external auxiliary voltage and the AS-Interface takes place via screw terminals in the corresponding connection element which is easily fitted to the module via a bayonet system.
The supply of the connected outputs can take place either from the internal power supply of the module (from AS-Interface) or via an external power source. Switching takes place via a sliding switch inside the element. The selection of the external power supply is indicated via an LED (AUX). The outputs are protected against reversal, overload and short circuit. An LED to indicate the AS-Interface voltage is available, another indicates errors in the AS-Interface communication. For parameterization there is an addressing jack in the element protected against external interference.
Literature | Language | File Type | File Size |
---|---|---|---|
Product information AS-Interface Stacklights | ENG | 452 KB |
Brief Instructions | Language | File Type | File Size |
---|---|---|---|
Instruction Manual Stack Lights / Betriebsanleitung Signalsäule | ALL | 1085 KB |
CAD | Language | File Type | File Size |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 1392 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
Certificates | Certificate No. | Language | File Type | File Size |
---|---|---|---|---|
US CA UL | CoC E223176 RptRef E223176-20080912 | ALL | 242 KB | |
USA UL UL | NMTR.E223176 | ALL | LINK | --- |
Worldwide AS-International Association AS-Interface | 124201 | ALL | 358 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|