Multi-Input/Output Junction Box, Polyester (GRP) F.MIO.P12.*12.F.*.***.***.**00
- For discrete inputs and outputs
- Glass fiber reinforced polyester, impact resistant, IP66
- Configurable cable entries for bus lines and field signal lines
- International approvals
- For FOUNDATION Fieldbus H1
- Installation in Zone 1/Div. 1, intrinsically safe
- Sensors in Zone 0/Div. 1
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of F.MIO.P12.*12.F.*.***.***.**00
| General specifications | ||
|---|---|---|
| Design / Mounting | Outside installation | |
| Installed components | Binary multi-input/output R8D0-MIO-Ex12.FF* , For technical data on installed electronic component see data sheet. | |
| Fieldbus connection | ||
| Fieldbus type | FOUNDATION Fieldbus | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Impact resistance | EN 60079-0 | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 55 °C (-22 ... 131 °F) , (extended temperature range available on request) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Relative humidity | < 75 % (annual mean) < 95 % (30 d/year), no moisture condensation |
|
| Impact resistance | 7J | |
| Mechanical specifications | ||
| Enclosure cover | detachable cover with retaining screws | |
| Degree of protection | IP66 | |
| Cable entry | cable gland and stopping plug options see separate table | |
| Material | ||
| Housing | polyester , impact resistant, glass fiber reinforced | |
| Surface | black molded finish (RAL 9005) | |
| Surface resistance | < 109 Ω | |
| Water absorption | < 6 % | |
| Seal | silicone , one-piece | |
| Grounding plate | brass | |
| Material thickness | grounding plate: 3 mm | |
| Dimensions | (W x H x D) 271 x 271 x 136 mm |
|
| Mounting | thru-holes Ø6.5 mm | |
| Grounding | grounding bolt M6 , Stainless steel | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | PTB 07 ATEX 1061 X (assembled Junction Box) , for additional certificates see www.pepperl-fuchs.com | |
| Marking |  II 2(1)G Ex ib [ia Ga] IIC T4 Gb II 2(1)D Ex tb [ia Da] IIIC T135°C Db |
|
| Certificate | PTB 17 ATEX 1011 X (assembled Junction Box) , for additional certificates see www.pepperl-fuchs.com | |
| Marking | II 3(1)G Ex ic [ia Ga] IIC T4 Gc II 3(1)G Ex ec [ia Ga] IIC T4 Gc II 3(1)D Ex tc [ia Da] IIIC T135°C Dc |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-31:2014 | |
| International approvals | ||
| IECEx approval | IECEx PTB 07.0036 X , Zone 1 , suitable Junction Box on request IECEx PTB 09.0016 X , Zone 2 , suitable Junction Box on request |
|
| INMETRO | TÜV 13.1143 | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242610 |
| ECLASS 12.0 | 27242610 |
| ECLASS 11.0 | 27242610 |
| ECLASS 10.0.1 | 27242610 |
| ECLASS 9.0 | 27242610 |
| ECLASS 8.0 | 27242610 |
| ECLASS 5.1 | 27242610 |
| ETIM 9.0 | EC001601 |
| ETIM 8.0 | EC001601 |
| ETIM 7.0 | EC001601 |
| ETIM 6.0 | EC001601 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121008 |
Details: F.MIO.P12.*12.F.*.***.***.**00
Function
This fieldbus junction box holds a multi-input/output (MIO) for transferring signals from discrete inputs and valves to the control system. The MIO offers the same functionality as components FD0-VC-Ex* and FD0-BI-*. The fieldbus junction box can be installed in Zone 1 with sensors and actuators located in Zone 0.
Glass fiber reinforced polyester provides corrosion resistance and is lightweight. The surface resistance avoids electrostatic charge.
Bus and field signal line entries can be chosen individually from a range of cable glands and stopping plugs. A breather drain is included by default. Tag plate and grounding bar are available as options.
This fieldbus junction box is available pre-wired, with all accessories, for fast ordering, delivery, site installation, and commissioning.
Informative Literature: F.MIO.P12.*12.F.*.***.***.**00
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron | ENG | 361 KB | |
| Application Report - Digital Communication in Steel-Plate Manufacturing | ENG | 470 KB |
Product Documentation: F.MIO.P12.*12.F.*.***.***.**00
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Instruction manual | ENG | 140 KB | |
| Manuals | |||
| Manual | ENG | 767 KB | |
Approvals: F.MIO.P12.*12.F.*.***.***.**00
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Brasil TUV Rheinland Brazil | TÜV 13.1143 | ALL | 1259 KB | |
| Europe PTB ATEX Category 2 G ATEX Category 2 D | PTB 07 ATEX 1061 X | ALL | 500 KB | |
| Worldwide PTB IECEx Certificate of Conformity Certificate | IECEx PTB 07.0036X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3884B | ALL | 132 KB | |
Associated Products: F.MIO.P12.*12.F.*.***.***.**00
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs (India) Pvt. Ltd.
Ground Floor, #546/1, Sy. No. 46, 7th Main
4th Phase, Peenya Industrial Estate
Bangalore - 560058
India
info@in.pepperl-fuchs.com
+91 80 4609 6000
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.