Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
General specifications | ||
---|---|---|
Signal type | Digital Input | |
Functional safety related parameters | ||
Safety Integrity Level (SIL) | SIL 3 | |
Systematic capability (SC) | SC 3 | |
Supply | ||
Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) | |
Rated voltage | 19 ... 30 V DC bus powered via Termination Board | |
Ripple | ≤ 10 % | |
Rated current | ≤ 55 mA | |
Power dissipation | ≤ 800 mW | |
Power consumption | ≤ 1300 mW | |
Input | ||
Connection side | field side | |
Connection | SL2: 5a(+), 5b(-) | |
Open circuit voltage/short-circuit current | approx. 8.4 V DC / approx. 11.9 mA | |
Switching point/switching hysteresis | 2.1 ... 2.8 mA / approx. 0.3 mA | |
Line fault detection | breakage I ≤ 0.15 mA , short-circuit I ≥ 8.5 mA | |
Lead resistance | max. 50 Ω , consider capacitances and inductances | |
Switching point | 1-signal: I > 2.8 mA 0-signal: I < 2.1 mA |
|
Response delay | ≤ 1 ms | |
Output | ||
Connection side | control side | |
Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) | |
Rated voltage | output I: 19 ... 30 V DC with external resistance > 2 kΩ, e. g. 16-channel ProSafe DI card SDV144 from Yokogawa | |
Output I | passive transistor output (resistive) 0-signal: 39 kΩ ± 5 % 1-signal: voltage drop 6.5 V ± 0.5 V fault: > 100 kΩ |
|
Output II | active voltage output, short-circuit proof 0-signal: 0 V 1-signal: 20 ... 31 V DC at max. 15 mA fault: 0 V |
|
Fault indication output | ||
Connection | SL1: 6b | |
Output type | open collector transistor (internal fault bus) | |
Transfer characteristics | ||
Switching frequency | ||
Output I | ≤ 50 Hz | |
Output II | ≤ 50 Hz | |
Galvanic isolation | ||
Output/power supply | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff | |
Output/Output | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff | |
Indicators/settings | ||
Display elements | LEDs | |
Labeling | space for labeling at the front | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | EN IEC 61326-3-2:2018 , NE 21:2017 For further information see system description. |
|
Degree of protection | IEC 60529:2001 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Mass | approx. 105 g | |
Dimensions | 12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D) | |
Height | 106 mm | |
Width | 12.5 mm | |
Depth | 128 mm | |
Mounting | on termination board | |
Coding | pin 1 and 2 trimmed For further information see system description. |
|
Data for application in connection with hazardous areas | ||
EU-type examination certificate | BASEEFA 07 ATEX 0302X | |
Marking | ![]() ![]() ![]() |
|
Input | Ex ia | |
Voltage | 10.5 V | |
Current | 17.1 mA | |
Power | 45 mW (linear characteristic) | |
Supply | ||
Maximum safe voltage | 253 V AC (Attention! Um is no rated voltage.) | |
Output | ||
Maximum safe voltage | 253 V AC (Attention! Um is no rated voltage.) | |
Certificate | PF 09 CERT 1440 X | |
Marking | ![]() |
|
Galvanic isolation | ||
Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
Directive conformity | ||
Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 | |
International approvals | ||
UL approval | E106378 | |
Control drawing | 116-0364 | |
IECEx approval | ||
IECEx certificate | IECEx BAS 07.0097X | |
IECEx marking | [Ex ia Ga] IIC, [Ex ia] IIIC , [Ex ia] I | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
System | Classcode |
---|---|
ECLASS 13.0 | 27210121 |
ECLASS 12.0 | 27210121 |
ECLASS 11.0 | 27210121 |
ECLASS 10.0.1 | 27210121 |
ECLASS 9.0 | 27210121 |
ECLASS 8.0 | 27210121 |
ECLASS 5.1 | 27210121 |
ETIM 9.0 | EC001485 |
ETIM 8.0 | EC001485 |
ETIM 7.0 | EC001485 |
ETIM 6.0 | EC001485 |
ETIM 5.0 | EC001485 |
UNSPSC 12.1 | 32101514 |
This isolated barrier is used for intrinsic safety applications.
The device transfers digital signals (SN/S1N proximity sensors or approved dry contacts) from the explosion-hazardous area to the non-explosion-hazardous area.
The input controls one active voltage output and one passive transistor output with a resistive output characteristic.
The passive transistor output has three defined states: 1-signal = 6.5 V voltage drop, 0-signal = 39 kΩ and fault > 100 kΩ.
This output characteristic offers line fault transparency on the signal lines.
During a fault state, both outputs switch to their fault state and LEDs indicate the fault according to NAMUR NE 44. A separate fault bus is available. This fault bus can be monitored if the termination board supports a module fault detection.
Unlike a SN/S1N series safety sensor, an approved dry contact requires a 10 kΩ resistor to be placed across the contact in addition to a 1.5 kΩ resistor in series.
This device mounts on a HiC termination board.
Safety and Security Documentation | Language | File Type | File Size |
---|---|---|---|
Instruction manual | ENG | 167 KB | |
Functional Safety Manual | ENG | 1966 KB | |
Manuals | |||
System Manual | ENG | 5438 KB |
CAD | Language | File Type | File Size |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 2770 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
CAE | |||
EPLAN macros H-System devices (EMA) / EPLAN-Makros Geräte H-System (EMA) | ALL | ZIP | 3536 KB |
Certificates | Certificate No. | Language | File Type | File Size |
---|---|---|---|---|
Baseefa IECEx Certificate of Conformity | IECEx BAS 07.0097X | ALL | LINK | --- |
China SITIIAS CCC Ex Certificate | 2021322316004125 (Singapore) | ALL | 988 KB | |
Europe Baseefa ATEX Category (M1) ATEX Category (1) GD | Baseefa 07 ATEX 0302X | ALL | 1615 KB | |
Europe Pepperl+Fuchs ATEX Category 3 G Certificate | PF 09 CERT 1440 X | ALL | 208 KB | |
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378 | CoC 20130429 - E106378 RepRef 20130429 | ALL | 425 KB | |
United Arab Emirates SGS Gulf Limited ECASEx | 24-02-101831/E24-02-105329/NB0002 | ALL | 603 KB | |
Worldwide exida Functional Safety Assessment | P+F 1406-079-C R035 V2R1 | ALL | 408 KB | |
Worldwide exida Functional Safety Certificate | Cert P+F 1406079 P0006 C014 V3R1 | ALL | 121 KB | |
Control Drawings | ||||
Control drawing UL / Control drawing UL | ALL | 154 KB | ||
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) | TDOC-0034FENG | ENG | 184 KB |