Bullet WirelessHART Adapter WHA-BLT-F9D0-N-A0-Z0-Ex1
- Installation in Zone 0, 20
- Installation in Class I, II, Division 1
- Installation in Class III
- Installation in Class I, Division 2
- Ex i circuits for Ex i field devices
- Cast aluminum housing
- Loop powered
- Direct mounting on HART or 4 mA ... 20 mA field device
- Encapsulated antenna
- Up to 8 field devices in multidrop
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of WHA-BLT-F9D0-N-A0-Z0-Ex1
| Supply | ||
|---|---|---|
| Rated voltage | 7 ... 30 V DC | |
| Rated current | < 1 mA , max. 25 mA | |
| Electrical specifications | ||
| Output current | 3.2 ... 25 mA | |
| Supply | loop power for field devices voltage: 1 ... 2.5 V DC, adjustable in steps of 0.5 V |
|
| Input | ||
| Connection | - 5 wires, 600 mm long, exiting from male thread NPT1/2 - 1 external grounding point |
|
| HART communication | ||
| Protocol | HART 7.1, backward compatible | |
| Number of devices | up to 8 HART field devices (depending on installation) | |
| Output | ||
| Interface | internal antenna | |
| Communication | WirelessHART specifications - physical layer: IEEE 802.15.4.2006 - frequency band: 2.4 GHz (ISM band, licence free) - maximum transmit power: +10 dBm - outdoor transmission range: 235 m - communication standard: WirelessHART acc. to IEC 62591 |
|
| Directive conformity | ||
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. | |
| Directive 2014/53/EU | EN 300 328 V2.1.1:2016 EN 301 489-1 V2.2.0:2017 EN 301 489-17 V3.2.0:2017 |
|
| FCC CFR47 Part 15 B and C | ANSI C63.4-2003 , FCC ID: X89-WA1101 | |
| Conformity | ||
| Degree of protection | IEC 60529:2013 | |
| Ambient conditions | ||
| Ambient temperature | temperature class T5: -40 ... 85 °C (-40 ... 185 °F) temperature class T6: -40 ... 75 °C (-40 ... 167 °F) |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | max. 100 % | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Material | aluminum alloy with polyurethane enamel paint | |
| Mass | 460 g | |
| Dimensions | 60.8 x 60.8 x 100 mm (l x w x h) | |
| Height | 100 mm | |
| Diameter | 60.8 mm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | FM 17 ATEX 0046 X | |
| Marking |  II 1G Ex ia IIC T6...T5 Ga II 1D Ex ia IIIC T95°C Da |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 | |
| International approvals | ||
| FM approval | FM 17 NUS 0010 FM 17 US 0191 X |
|
| Control drawing | 116-0425 (cFMus) | |
| Approved for | IS Class I, II, III, Division 1, Groups A-G Class I, Zone 0, AEx ia IIC T6...T5 Ga Zone 20, AEx ia IIIC T95°C Da |
|
| CSA approval | FM 17 NCA 0004 FM 17 CA 0102 X |
|
| Control drawing | 116-0425 (cFMus) | |
| Approved for | IS Class I, II, III, Division 1, Groups A-G Ex ia IIC T6...T5 Ga Ex ia IIIC T95°C Da associated apparatus [Ex ia] |
|
| IECEx approval | ||
| IECEx certificate | IECEx FMG 17.0020X | |
| IECEx marking | Ex ia IIC T6...T5 Ga , Ex ia IIIC T95°C Da | |
| Standards | IEC 60079-0:2011 , IEC 60079-1:2014 , IEC 60079-11:2011 , IEC 60079-31:2013 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27219090 |
| ECLASS 12.0 | 27219090 |
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27242692 |
| ETIM 9.0 | EC002584 |
| ETIM 8.0 | EC002584 |
| ETIM 7.0 | EC002584 |
| ETIM 6.0 | EC002584 |
| ETIM 5.0 | EC002584 |
| UNSPSC 12.1 | 39121008 |
Details: WHA-BLT-F9D0-N-A0-Z0-Ex1
Function
The device upgrades a conventional HART or 4 ... 20 mA field device with a WirelessHART interface.
The supply is ensured via loop power. Due to its intrinsically safe circuits, the adapter can be mounted on an intrinsically safe field device or anywhere in the 4 ... 20 mA loop. Up to 8 HART field devices can be connected to each other in multidrop mode. The encapsulated antenna allows for use in harsh environments.
The device can be programmed with a configuration tool easily (DTM or DD).
Informative Literature: WHA-BLT-F9D0-N-A0-Z0-Ex1
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Application Report - Outdoor Monitoring of Gas Limit Values | ENG | 158 KB | |
| Application Report - WirelessHART Adapter Bullet Enables More Flexibility for Mobile Mixing Tanks | ENG | 129 KB | |
| Application Report - WirelessHART Connects Mobile Measurement Stations | ENG | 149 KB | |
| Application Report - Wirelessly Networked Tank Farms | ENG | 736 KB |
Product Documentation: WHA-BLT-F9D0-N-A0-Z0-Ex1
| System Descriptions | Language | File Type | File Size |
|---|---|---|---|
| Patent Information | ENG | 365 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 201 KB | |
| Manuals | |||
| Manual | ENG | 2085 KB | |
Approvals: WHA-BLT-F9D0-N-A0-Z0-Ex1
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Europe FM ATEX ia 1G ATEX ia 1D | FM 17 ATEX 0046X | ALL | 301 KB | |
| Korea KOSHA | 21-AV4BO-00225X | ALL | 442 KB | |
| Control Drawings | ||||
| Control drawing CSA / Control drawing CSA | ALL | 187 KB | ||
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3836D | ALL | 78 KB | |
Software: WHA-BLT-F9D0-N-A0-Z0-Ex1
| Device Description Files/Drivers | Release Info | File Type | File Size |
|---|---|---|---|
| DTM WirelessHART Adapter WHA-BLT* "Bullet" / DTM WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 16481 KB | |
| FHX-File WirelessHART Adapter WHA-BLT* "Bullet" / FHX-Datei WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 1115 KB | |
| DD WirelessHART Adapter WHA-BLT* "Bullet" / DD WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 3513 KB |
Associated Products: WHA-BLT-F9D0-N-A0-Z0-Ex1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Pepperl+Fuchs (India) Pvt. Ltd.
Ground Floor, #546/1, Sy. No. 46, 7th Main
4th Phase, Peenya Industrial Estate
Bangalore - 560058
India
info@in.pepperl-fuchs.com
+91 80 4609 6000
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.