NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:
注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。
データシート(PDF):
一般的な仕様 | ||
---|---|---|
スイッチング機能 | 常閉(NC) | |
出力タイプ | NAMUR | |
定格動作距離 | 5 mm | |
設置 | ノンフラッシュ(非面一) | |
保証動作距離 | 0 ... 4,05 mm | |
出力タイプ | 2 線式 | |
公称定格 | ||
動作電圧 | 5 ... 15 V | |
切替え周波数 | 0 ... 2000 Hz | |
ヒステリシス | 0,05 ... 0,75 | |
消費電流 | ||
測定プレートが検出されませんでした | min. 2,7 mA | |
測定プレートが検出されました | ≤ 1,8 mA | |
機能安全関連パラメータ | ||
MTTFd | 8162 a | |
ミッションタイム(TM) | 20 a | |
診断範囲(DC) | 0 % | |
承認と証明書 | ||
UL 認証 | cULus リスト記載、汎用 | |
CCC 認証 | 定格 ≤ 36 V の製品では CCC 認証/マーキングは不要です | |
環境条件 | ||
周囲温度 | -25 ... 70 °C (-13 ... 158 °F) | |
機械仕様 | ||
接続タイプ | はんだ接続 | |
ハウジング材質 | PA | |
保護等級 | IP67 | |
寸法 | ||
長さ | 6,5 mm | |
直径 | 10 mm |
System | Classcode |
---|---|
ECLASS 11.0 | 27270101 |
ECLASS 10.0.1 | 27270101 |
ECLASS 9.0 | 27270101 |
ECLASS 8.0 | 27270101 |
ECLASS 5.1 | 27270101 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
CAD | 言語 | ファイルタイプ | ファイルサイズ |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 26 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
認証 | 認証番号 | 言語 | ファイルタイプ | ファイルサイズ |
---|---|---|---|---|
Canada USA CSA Ordinary Location | 1007121 | ALL | 198 KB | |
Canada USA UL Ordinary Location | UL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3 | ALL | 1806 KB | |
China Information on CCC | CCC-Exempt Declaration (Pepperl+Fuchs) | ALL | 457 KB |