Ultrasonic sensor UCC4000-50GK-B26-V15-Y70169750
- Thread M50
- PTFE coated transducer
- M12 male connector
- PWM output
- Power save mode
- Temperature compensation
- Customer-specific configuration
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
PDF 파일로 된 데이타 시트 다운로드:
데이타 시트 발췌: 기술 사양 UCC4000-50GK-B26-V15-Y70169750
| 제품 설명 |
|---|
| Single head system |
| General specifications | ||
|---|---|---|
| Sensing range | 250 ... 4000 mm | |
| Dead band | 0 ... 250 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 75 kHz | |
| Electrical specifications | ||
| Operating voltage | 2.5 ... 5 V DC |
|
| No-load supply current | ≤ 60 mA at 3.3 V DC | |
| Quiescent current indication | < 3 µA In standby mode | |
| Power consumption | ≤ 250 mW in the measurement operating mode | |
| Time delay before availability | ≤ 95 ms | |
| Interface 1 | ||
| Interface type | Physical LIN interface | |
| Transfer rate | 19.2 kBit/s (8N1) | |
| Cycle time | 80 ms | |
| Resolution | 16 mm (corresponding to 1 LSB) | |
| Input | ||
| Input type | Standby active | |
| Signal level | low: 0 ... 0.8 V | |
| Output | ||
| Output type | PWM output (PNP) , not short-circuit protected | |
| Resolution | pulse length 10 µs /cm | |
| Output current | max. 10 mA | |
| Temperature influence | 3 % of full-scale value over the entire temperature range | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection. |
|
| Approvals and certificates | ||
| UL approval | UL Recognized , General purpose , Class 2 power source | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug | |
| Degree of protection | IP67 | |
| Material | ||
| Housing | PBT | |
| Transducer | epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated | |
| Connector | ||
| Threading | M12 x 1 | |
| Number of pins | 5 | |
| Mass | 115 g | |
| Dimensions | ||
| Height | 54 mm | |
| Width | 50 mm | |
| Length | 50 mm | |
| Factory settings | ||
| Default setting | Temperature compensation Address setting 7 |
|
| Beam width | wide | |
| General information | ||
| Scope of delivery | 2 nuts plastic | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: UCC4000-50GK-B26-V15-Y70169750
Design / Simulation: UCC4000-50GK-B26-V15-Y70169750
| CAD | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2654 KB |
Approvals: UCC4000-50GK-B26-V15-Y70169750
| Certificates | 인증서 번호 | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-US-2230246-0 / UL-CA-2229610-0 | ALL | 547 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-7700 | ALL | 36 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F) | DOC-7701 | ALL | 34 KB | |
The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.
페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
+82 2 34819494
© 2024 All Rights Reserved.
Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.