Vibration sensor VIM32PP-E7DC8-0RE-IO-1V1401

Raw data for vibration acceleration a-Raw by means of BLOB transfer
Frequency range up to 12 kHz with sampling rate up to 64 kHz
Bearing status parameter according to DIN ISO 13373
Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
Vibration acceleration in g (rms) acc. to DIN ISO 10816/20816
Additional temperature value output
IO-Link Interface for process data, parameterization and diagnosis
Rugged stainless steel housing

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Aanverwante producten
Vraag het aan een Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:

Technische gegevens VIM32PP-E7DC8-0RE-IO-1V1401

Productbeschrijving
Vibration sensor with IO-Link and programmable switching output or analog current output

General specifications
Type		Vibration sensor
Measuring technology		MEMS capacitive
Series		Performance Plus Line
Measured variable		Vibration velocity Vibration acceleration Bearing status parameter Crest factor Temperature
Measuring range
	Vibration velocity	0 ... 128 mm/s
	Vibration acceleration	0 ... 34 g rms
	Vibration acceleration	0 ... 48 g peak value per 1 s
	Vibration acceleration	-48 ... 48 g by means of BLOB transfer
	Bearing status parameter	1 ... 4 see section characteristic curve
	Crest factor	0 ... 100
	Temperature	-40 ... 85 °C (-40 ... 185 °F)
Measurement accuracy		Vibration velocity: ± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s Vibration acceleration: ± 0.01 g (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954
Cross-sensitivity		< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
Resolution		Vibration velocity: 0.01 mm/s Vibration acceleration: 0.01 g Bearing status parameter: 0.01
Frequency range		Vibration acceleration a-raw: 1 ... 12 kHz , by means of BLOB transfer Vibration velocity rms: 10 ... 1000 Hz , acc. to DIN ISO 10816/20816 , programmable Vibration acceleration rms: 1 ... 1000 Hz , acc. to DIN ISO 10816/20816 , programmable Vibration acceleration a-peak: 10 ... 10 kHz Crest factor: 10 ... 10 kHz Bearing status parameter: 10 ... 10 kHz , acc. to DIN ISO 13373-3
Averaging time		for v-rms: 2 s for a-rms: 2 s
Sampling rate		Vibration acceleration a-raw: 64 kHz , programmable Vibration velocity rms: 8 Hz Vibration acceleration rms: 8 kHz Vibration acceleration a-peak: 32 Hz Crest factor: 32 Hz Bearing status parameter: 32 kHz
Functional safety related parameters
MTTF_d		329 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Electrical specifications
Fusing		external fuse is required: 1 A , fast acting , 30 V DC
Operating voltage		18 ... 30 V DC
Current consumption		max. 320 mA
Power consumption		max. 10 W
Time delay before availability		≤ 3.6 s
Surge protection		up to 2 kV
Interface
Interface type		IO-Link (via C/Q = Pin 4)
IO-Link revision		1.1
Device profile		Identification and Diagnosis - I&D , BLOB transfer
Process data		Input 24 Byte measurement channels: -rms value velocity - peak value acceleration - rms value acceleration - temperature - crest factor - bearing status parameter per measurement channel: - measurement value 2 Byte - scaling 8 Bit - switching signals 2 Bit status data
Vendor ID		1 (0x0001)
Device ID		5308673 (0x510101)
Transfer rate		COM3 (230.4 kbits/s)
Min. cycle time		3.8 ms
SIO mode support		yes
Compatible master port type		Class A Class B (use 3-pole adapter or 3-wire cable)
BLOB size		1.28 MByte , programmable
BLOB segments		200 Byte per request and BLOB segment respectively
Output 1
Output type		C/Q - Pin 4 in SIO mode (switching signal of the measured variable is programmable)
Switching function		Normally open/closed (NO/NC)
Operating current		≤ 100 mA
Short-circuit protection		yes
Output 2
Output type		I/Q - pin 2 (parameterizable as analog current output or switching signal) - I: analog output for the measured variable, current 4 ... 20 mA - Q: switching signal of the measured variable is parameterizable, PNP normally open
Switching function		Normally open/closed (NO/NC)
Operating current		≤ 120 mA for switching signal
Voltage drop		< 2 V
Output current		4 ... 20 mA at analog output
Load resistor		≤ 500 Ω at analog output
Short-circuit protection		yes
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67
Shock resistance		DIN EN 60068-2-27, 60 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 16.5 g, 10 ... 12000 Hz
Vibration evaluation		DIN ISO 10816/20816 , DIN ISO 13373-3
Approvals and certificates
UL approval
	Ordinary Location	E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request
	Maximum permissible ambient temperature	max. 80 °C (max. 176 °F)
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		plug
Housing material		Stainless steel 1.4305 / AISI 303
Degree of protection		IP66 / IP67 only in connected state
Connector
	Threading	M12
	Number of pins	4
Mass		approx. 100 g
Dimensions
	Length	72.5 mm
	Diameter	23.8 mm

Classifications

System	Classcode
ECLASS 13.0	27271103
ECLASS 12.0	27201406
ECLASS 11.0	27201406
ECLASS 10.0.1	27201406
ECLASS 9.0	27201406
ECLASS 8.0	27201406
ECLASS 5.1	27201406
ETIM 9.0	EC004309
ETIM 8.0	EC004309
ETIM 7.0	EC002959
ETIM 6.0	EC002959
ETIM 5.0	EC001758
UNSPSC 12.1	41114624

Details: VIM32PP-E7DC8-0RE-IO-1V1401

Informative Literature: VIM32PP-E7DC8-0RE-IO-1V1401

Literature	Taal	Bestandstype	Bestandsgrootte
Product Overview - Vibration Sensors	ENG	PDF	1351 KB
Application Report - Servicing Mobile Concrete Mixers According to Actual Needs	ENG	PDF	169 KB

Product Documentation: VIM32PP-E7DC8-0RE-IO-1V1401

Product information	Taal	Bestandstype	Bestandsgrootte
Installation and user instructions for offline parameterization of IO-Link sensors	ENG	PDF	1788 KB
Brief Instructions
Instruction leaflet / Beipackzettel	ALL	PDF	252 KB
Safety and Security Documentation
Handleiding	HOL	PDF	149 KB
Manuals
Manual VIM3-IO- Vibration Sensors	ENG	PDF	2011 KB
Parameter Information
IO-Link Parameter Datasheet VIM32PP-E7DC8-0RE-IO-1V1401	ENG	PDF	843 KB

Design / Simulation: VIM32PP-E7DC8-0RE-IO-1V1401

CAD	Taal	Bestandstype	Bestandsgrootte
CAD 3-D / CAD 3-D	ALL	STP	2046 KB
CAD 3-D / CAD 3-D	ALL	STP	2534 KB

Approvals: VIM32PP-E7DC8-0RE-IO-1V1401

Certificates	Certificaatnummer	Taal	Bestandstype	Bestandsgrootte
IO-Link Manufacturer Declaration	CERT-7546A	ALL	PDF	265 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)	DOC-6865	ALL	PDF	325 KB
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)	DOC-7705	ALL	PDF	236 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6866	ALL	PDF	249 KB
UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F)	DOC-7706	ALL	PDF	201 KB

Software: VIM32PP-E7DC8-0RE-IO-1V1401

Device Description Files/Drivers	Vrijgave-informatie	Bestandstype	Bestandsgrootte
IODD for VIM32PP-D-0-01 / IODD für VIM32PP-D-0-01	V2.00.000 / 2024-09-09	ZIP	237 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool	V1.00.006 / 2022-07-10	ZIP	96138 KB

Aanverwante producten: VIM32PP-E7DC8-0RE-IO-1V1401

Accessories

	V1-G-0,6M-PUR-V1-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable greyfa

	ICE2-8IOL-G65L-V1D IO-Link master
	EtherNet/IP IO-Link master with 8 inputs/outputsfa

	ICE3-8IOL-G65L-V1D IO-Link master
	PROFINET IO IO-Link master with 8 inputs/outputsfa

	MONAD-M08-1,25-M08-1,25K/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 19.5fa

	MONAD-M08-1,25-M10-1,5/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa

	MONAD-M08-1,25-M30-3,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M30 x 3.5, screw-in depth 45fa

	MONAD-M08-1,25-1,2Z-BSPT/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread NPT1/2", screw-in depth 24fa

	EMCAD-M08-1,25-M08-1,25/36 Mounting adapter
	EMC adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 8fa

	RSL3-CS-SC-M55P200 Protective rubber sleeve
	Protective rubber sleeve for VIM3* vibration sensors against ingress of moisture and mechanical effectsfa

	V1-G-BK2M-PUR-U-V1-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

	V1-G-BK5M-PUR-U-V1-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

	V1-G-BK10M-PUR-U-V1-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

	IO-Link-Master02-USB IO-Link master
	IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa

	ICE1-8IOL-G60L-V1D IO-Link master
	Ethernet IO-Link module with 8 inputs/outputsfa

	ICE1-8IOL-G30L-V1D IO-Link master
	Ethernet IO-Link module with 8 inputs/outputsfa

	ICE2-8IOL-K45S-RJ45 IO-Link master
	EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa

	ICE3-8IOL-K45P-RJ45 IO-Link master
	PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa

	ICE3-8IOL-K45S-RJ45 IO-Link master
	PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa

	ICE2-8IOL-K45P-RJ45 IO-Link master
	EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa

	V1-G-BK0,6M-PUR-U-V1-G Connection cable
	Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

	MONAD-M08-1,25-M06-1,0/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M6 x 1.0, screw-in depth 10fa

	MONAD-M08-1,25-M10-1,5/8 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa

	MONAD-M08-1,25-M16-2,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M16 x 2.0, screw-in depth 27fa

	MONAD-M08-1,25-M20-2,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M20 x 2.5, screw-in depth 34fa

	MONAD-M08-1,25-M24-3,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M24 x 3.0, screw-in depth 40fa

	MAGAD-M08-1,25-MAG/36 Magnetic adapter
	Magnetic adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, holding force 35 kgfa

Algemene opmerkingen met betrekking tot de informatie in de Pepperl+Fuchs productdocumentatie

Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
phone +31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
phone +31 73 75 07 108

Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.