Vibration sensor VIM62PP-E1V16-0NE-I420KA4
- Extended temperature range
- Screw-in thread for simple installation
- Simple electrical commissioning
- Rugged stainless steel housing
- Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
- Suitable for use in harzadous area up to Zone 1/21 with type of protection explosionproof enclosure
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens VIM62PP-E1V16-0NE-I420KA4
| Productbeschrijving |
|---|
| Vibration sensor with analog current output, increased temperature resistance, suitable up to Zone 1/21 with type of protection explosionproof enclosure |
| General specifications | ||
|---|---|---|
| Type | Vibration sensor | |
| Measuring technology | MEMS | |
| Series | Performance Plus Line | |
| Measured variable | Vibration velocity | |
| Measuring range | ||
| Vibration velocity | 0 ... 16 mm/s | |
| Measurement accuracy | ± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s |
|
| Cross-sensitivity | < 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis | |
| Frequency range | 10 ... 1000 Hz | |
| Averaging time | for v-rms: 2 s | |
| Electrical specifications | ||
| Fusing | external fuse is required: 3 A , semi-time-lag , 30 V DC | |
| Operating voltage | 10 ... 30 V DC | |
| Current consumption | max. 25 mA | |
| Power consumption | max. 750 mW | |
| Time delay before availability | 10 s (rms filter is calculated intially with measurement data before they are available at the output) | |
| Surge protection | up to 2 kV | |
| Output 1 | ||
| Output type | analog output, current output of the vibration variable |
|
| Output current | 4 ... 20 mA | |
| Load resistor | ≤ 500 Ω | |
| Standard conformity | ||
| Degree of protection | DIN EN 60529, IP66, IP67 | |
| Shock resistance | DIN EN 60068-2-27, 60 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz | |
| Vibration evaluation | DIN ISO 10816/20816 | |
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Gb | IECEx CSAE 22.0042X | |
| Equipment protection level Db | IECEx CSAE 22.0042X | |
| ATEX approval | ||
| Equipment protection level Gb | CSANe 21 ATEX 1074 X | |
| Equipment protection level Db | CSANe 21 ATEX 1074 X | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Measuring head temperature | -40 ... 125 °C (-40 ... 257 °F) directly at the mounting point | |
| Storage temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Mechanical specifications | ||
| Connection type | cable | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Degree of protection | IP66 / IP67 only in connected state | |
| Cable | ||
| Number of cores | 4 | |
| Core cross section | 0.34 mm2 | |
| Length | 10 m | |
| Tension force | max. 80 N (tensile loading directly at the cable, not at the metal conduit if attached) | |
| Mass | 740 g | |
| Dimensions | ||
| Length | 82.35 mm | |
| Diameter | 31 mm | |
| General information | ||
| Use in the hazardous area | see instruction manuals Only use accessories specified by the manufacturer. |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27271103 |
| ECLASS 12.0 | 27201406 |
| ECLASS 11.0 | 27201406 |
| ECLASS 10.0.1 | 27201406 |
| ECLASS 9.0 | 27201406 |
| ECLASS 8.0 | 27201406 |
| ECLASS 5.1 | 27201406 |
| ETIM 9.0 | EC004309 |
| ETIM 8.0 | EC004309 |
| ETIM 7.0 | EC002959 |
| ETIM 6.0 | EC002959 |
| ETIM 5.0 | EC001758 |
| UNSPSC 12.1 | 41114624 |
Details: VIM62PP-E1V16-0NE-I420KA4
Informative Literature: VIM62PP-E1V16-0NE-I420KA4
| Literature | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Product Overview - Vibration Sensors | ENG | 1351 KB |
Product Documentation: VIM62PP-E1V16-0NE-I420KA4
| Safety and Security Documentation | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Handleiding | HOL | 153 KB | |
| Manuals | |||
| Manual VIM6*-Vibration Sensors | ENG | 2498 KB | |
Design / Simulation: VIM62PP-E1V16-0NE-I420KA4
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 899 KB |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 117 KB |
Approvals: VIM62PP-E1V16-0NE-I420KA4
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Europe CSA ATEX Category 2 | CSANe 22 ATEX 1074 X | ALL | 1221 KB | |
| Worldwide IECEx Certificate of Conformity | IECEx CSAE 22.0042X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-6808 | ALL | 332 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6850 | ALL | 326 KB | |
Aanverwante producten: VIM62PP-E1V16-0NE-I420KA4
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
+31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
+31 73 75 07 108
© 2024 Alle rechten voorbehouden.
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.