Vibration sensor VIM32PL-E1V64-0RE-I421V14
- Analog current output
- Screw-in thread for simple installation
- Simple electrical commissioning
- Rugged stainless steel housing
- Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
- Switching output
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens VIM32PL-E1V64-0RE-I421V14
| Productbeschrijving |
|---|
| Vibration sensor with switching output and analog current output |
| General specifications | ||
|---|---|---|
| Type | Vibration sensor | |
| Measuring technology | MEMS | |
| Series | Performance Line | |
| Measured variable | Vibration velocity | |
| Measuring range | ||
| Vibration velocity | 0 ... 64 mm/s | |
| Measurement accuracy | ± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s |
|
| Cross-sensitivity | < 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis | |
| Frequency range | 10 ... 1000 Hz | |
| Averaging time | for v-rms: 2 s | |
| Functional safety related parameters | ||
| MTTFd | 329 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | ||
| Fusing | external fuse is required: 1 A , fast acting , 30 V DC | |
| Operating voltage | 18 ... 30 V DC | |
| Current consumption | max. 220 mA | |
| Power consumption | max. 6.6 W | |
| Time delay before availability | 2 s (rms filter is calculated intially with measurement data before they are available at the output) | |
| Surge protection | up to 2 kV | |
| Output 1 | ||
| Output type | analog output, current output of the vibration variable |
|
| Output current | 4 ... 20 mA | |
| Load resistor | ≤ 500 Ω | |
| Output 2 | ||
| Output type | PNP | |
| Switching function | Normally closed (NC) | |
| Operating current | ≤ 100 mA | |
| Voltage drop | < 2 V | |
| Switching threshold | 6.4 mm/s ( 10 % of the measuring range ) | |
| Preset response time | 2 s (minimum time for a vibration event above the switching threshold so that the output switches) | |
| Short-circuit protection | yes | |
| Standard conformity | ||
| Degree of protection | DIN EN 60529, IP66, IP67 | |
| Shock resistance | DIN EN 60068-2-27, 60 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz | |
| Vibration evaluation | DIN ISO 10816/20816 | |
| Approvals and certificates | ||
| UL approval | ||
| Ordinary Location | E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request |
|
| Maximum permissible ambient temperature | max. 80 °C (max. 176 °F) | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | plug | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Degree of protection | IP66 / IP67 only in connected state | |
| Connector | ||
| Threading | M12 | |
| Number of pins | 4 | |
| Mass | approx. 100 g | |
| Dimensions | ||
| Length | 72.5 mm | |
| Diameter | 23.8 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27271103 |
| ECLASS 12.0 | 27201406 |
| ECLASS 11.0 | 27201406 |
| ECLASS 10.0.1 | 27201406 |
| ECLASS 9.0 | 27201406 |
| ECLASS 8.0 | 27201406 |
| ECLASS 5.1 | 27201406 |
| ETIM 9.0 | EC004309 |
| ETIM 8.0 | EC004309 |
| ETIM 7.0 | EC002959 |
| ETIM 6.0 | EC002959 |
| ETIM 5.0 | EC001758 |
| UNSPSC 12.1 | 41114624 |
Details: VIM32PL-E1V64-0RE-I421V14
Informative Literature: VIM32PL-E1V64-0RE-I421V14
| Literature | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Product Overview - Vibration Sensors | ENG | 1351 KB | |
| Application Report - Servicing Mobile Concrete Mixers According to Actual Needs | ENG | 169 KB |
Product Documentation: VIM32PL-E1V64-0RE-I421V14
| Brief Instructions | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 252 KB | |
| Safety and Security Documentation | |||
| Handleiding | HOL | 149 KB | |
| Manuals | |||
| Manual VIM3* Vibration Sensors | ENG | 1870 KB | |
Design / Simulation: VIM32PL-E1V64-0RE-I421V14
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2534 KB |
Approvals: VIM32PL-E1V64-0RE-I421V14
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Canada, USA UL Ordinary Location | E468231 | ALL | 610 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5656A | ALL | 449 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5657A | ALL | 255 KB | |
Aanverwante producten: VIM32PL-E1V64-0RE-I421V14
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
+31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
+31 73 75 07 108
© 2024 Alle rechten voorbehouden.
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.