Read head WCS3B-LS710S
- EtherCAT interface
- Non-contact, absolute position encoder
- Automatic detection of dirt accumulation
- Speed transfer
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens WCS3B-LS710S
| Productbeschrijving |
|---|
| Read head with EtherCAT interface |
| General specifications | ||
|---|---|---|
| Sampling rate | 1.5 ms | |
| Passage speed | ≤ 12.5 m/s | |
| Measuring length | max. 314.5 m | |
| Free tolerances to code rail | horizontal: 31 mm ( ± 15.5 mm ) vertical: 28 mm ( ± 14 mm ) |
|
| Resolution | ± 0.4 mm (1,250 positions/m) | |
| Functional safety related parameters | ||
| MTTFd | 160 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| LED indication | Status indication Green: code rail detected, normal function Red: system error Flashing red: no code rail detected |
|
| LED ERROR | Error status (red) see manual for coding |
|
| LED RUN | Off: init Flashing (green): pre-operational Single flash (green): safe-operational On (green): operational |
|
| LED Link/Act | Port status (green) | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Power consumption | 6 W | |
| Interface | ||
| Interface type | Ethernet ; 100 BASE-TX | |
| Data output code | binary code | |
| Protocol | EtherCAT® | |
| Transfer rate | 100 MBit/s | |
| Output | ||
| Output velocity | switching output short-circuit protected |
|
| Switching voltage | Operating voltage | |
| Load current | max. 25 mA | |
| Standard conformity | ||
| Emitted interference | EN 61000-6-4:2007+A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | EN 60068-2-27:2009 | |
| Vibration resistance | EN 60068-2-6:2008 | |
| Approvals and certificates | ||
| CSA approval | cCSAus Certified, General Purpose Class 2 power source |
|
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Operating temperature | 0 ... 60 °C (32 ... 140 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Mechanical specifications | ||
| Connection type | 8-pin, M12 x 1 connector socket, Y-coded | |
| Cable gland | Max. tightening torque of the cap nut: ≤ 0.4 Nm | |
| Degree of protection | IP54 | |
| Material | ||
| Housing | ABS , PC (Polycarbonate) | |
| Mass | 500 g | |
| Dimensions | ||
| Height | 99 mm | |
| Width | 90 mm | |
| Length | 115 mm | |
| General information | ||
| Ordering information | Mounting plate included with delivery | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270918 |
| ECLASS 12.0 | 27270918 |
| ECLASS 11.0 | 27270701 |
| ECLASS 10.0.1 | 27270701 |
| ECLASS 9.0 | 27270701 |
| ECLASS 8.0 | 27270701 |
| ECLASS 5.1 | 27270701 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 41111945 |
Details: WCS3B-LS710S
Product Documentation: WCS3B-LS710S
| Manuals | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Manual WCS Electrical | ENG | 11790 KB | |
| Manual WCS Mechanical | ENG | 12338 KB |
Design / Simulation: WCS3B-LS710S
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2923 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: WCS3B-LS710S
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Canada USA CSA Ordinary Location | 1007121 | ALL | 198 KB | |
| Worldwide ETG EtherCAT Certificate of Conformity | 199290-0055 | ALL | 250 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0909F | ALL | 87 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6636A | ALL | 84 KB | |
Software: WCS3B-LS710S
| Device Description Files/Drivers | Vrijgave-informatie | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| ESI-file for WCS3B-LS710x / ESI-Datei für WCS3B-LS710x | 09/2021 | ZIP | 3 KB |
Aanverwante producten: WCS3B-LS710S
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
+31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
+31 73 75 07 108
© 2024 Alle rechten voorbehouden.
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.