USi-industry evaluation unit USIM-F264-4E5-V19
- Evaluation unit for ultrasonic transducers with eliptic sound field
- Object detection in the near range
- Multiple device installation possible, no mutual interference (no cross-talk)
- Adjustable sound cone
- Temperature compensation
- Parameterizable input, e.g. for switching between two parameter sets
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens USIM-F264-4E5-V19
| Productbeschrijving |
|---|
| Evaluation unit for the ultrasonic sensor system USi-industry with switching outputs (stand-alone device/main device) |
| General specifications | ||
|---|---|---|
| Type | USi-industry evaluation unit | |
| Sensing range | 10 ... 2500 mm factory setting: 2000 mm |
|
| Adjustment range | 150 ... 2500 mm | |
| Dead band | 0 ... 10 mm | |
| Object size | typ. ∅ 10 mm | |
| Transducer frequency | approx. 103 kHz | |
| Response delay | 10 ... 20000 ms factory setting: 150 ms |
|
| Sensor cycle time | 10 ... 200 ms factory setting: 50 ms |
|
| Resolution | 1 mm | |
| Target velocity | axial (max.): typ. 2 m/s (up to 2.5 m/s) | |
| Repeat accuracy | ± 0.1 % of full-scale value | |
| Temperature influence | automatic or manual temperature compensation available , without temperature compensation: 0.17 %/K |
|
| Indicators/operating means | ||
| LED green | supply voltage/device status | |
| LED yellow | output states | |
| Button | Teach-in | |
| Electrical specifications | ||
| Operating voltage | 9 ... 30 V DC |
|
| No-load supply current | ≤ 160 mA | |
| Power consumption | < 2.5 W | |
| Time delay before availability | ≤ 300 ms | |
| Interface | ||
| Interface type | USB 2.0 | |
| Inputs | ||
| Input type | 2 inputs for ultrasonic transducers 1 digital input |
|
| Output 1 | ||
| Designation | OUT 1.1 | |
| Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
| Voltage drop | ≤ 2.5 V | |
| Switching frequency | 0.05 Hz ... 100 Hz | |
| Off-state current | ≤ 100 µA | |
| Switching voltage | max. UB | |
| Switching current | 100 mA | |
| Output 2 | ||
| Designation | OUT 1.2 | |
| Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
| Voltage drop | ≤ 2.5 V | |
| Switching frequency | 0.05 Hz ... 100 Hz | |
| Off-state current | ≤ 100 µA | |
| Switching voltage | max. UB | |
| Switching current | 100 mA | |
| Output 3 | ||
| Designation | OUT 2.1 | |
| Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
| Voltage drop | ≤ 2.5 V | |
| Switching frequency | 0.05 Hz ... 100 Hz | |
| Off-state current | ≤ 100 µA | |
| Switching voltage | max. UB | |
| Switching current | 100 mA | |
| Output 4 | ||
| Designation | OUT 2.2 | |
| Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
| Voltage drop | ≤ 2.5 V | |
| Switching frequency | 0.05 Hz ... 100 Hz | |
| Off-state current | ≤ 100 µA | |
| Switching voltage | max. UB | |
| Switching current | 100 mA | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 55011:2016-04 |
|
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug | |
| Degree of protection | IP65 | |
| Connection | for power supply and outputs: connector plug M12, 8-pin, connection line max. 30 m for ultrasonic transducer: for each socket M8, 3-pin for parameterization: socket Mini USB |
|
| Material | ||
| Housing | diecast aluminum | |
| Mass | 250 g | |
| Dimensions | ||
| Height | 35 mm | |
| Width | 77 mm | |
| Length | 98 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: USIM-F264-4E5-V19
Informative Literature: USIM-F264-4E5-V19
| Literature | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Product Information - Ultrasonic Sensor Systems USi®-industry and USi®-safety | ENG | 1781 KB | |
| Application Report | ENG | 347 KB | |
| Application Report | ENG | 333 KB |
Product Documentation: USIM-F264-4E5-V19
| Manuals | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Manual USi-industry USI*-F264-*-V19 | ENG | 2461 KB |
Approvals: USIM-F264-4E5-V19
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056, Vol.1, Sec.65 | ALL | 285 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-7654 | ALL | 69 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F) | DOC-7655 | ALL | 67 KB | |
Software: USIM-F264-4E5-V19
| Device Description Files/Drivers | Vrijgave-informatie | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| DTM for USI*-F264-* / DTM für USI*-F264-* | V1.0.0.3 / 2024-10-08 | ZIP | 22284 KB |
| Software Tools | |||
| PACTware 6.X / PACTware 6.X | 6.1 | ZIP | 335938 KB |
Aanverwante producten: USIM-F264-4E5-V19
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.
Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
+31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
+31 73 75 07 108
© 2024 Alle rechten voorbehouden.
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.