Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Productbeschrijving |
---|
Single head system |
General specifications | ||
---|---|---|
Sensing range | 250 ... 4000 mm | |
Dead band | 0 ... 250 mm | |
Standard target plate | 100 mm x 100 mm | |
Transducer frequency | approx. 75 kHz | |
Electrical specifications | ||
Operating voltage | 2.5 ... 5 V DC |
|
No-load supply current | ≤ 60 mA at 3.3 V DC | |
Quiescent current indication | < 3 µA In standby mode | |
Power consumption | ≤ 250 mW in the measurement operating mode | |
Time delay before availability | ≤ 95 ms | |
Interface 1 | ||
Interface type | Physical LIN interface | |
Transfer rate | 19.2 kBit/s (8N1) | |
Cycle time | 80 ms | |
Resolution | 16 mm (corresponding to 1 LSB) | |
Input | ||
Input type | Standby active | |
Signal level | low: 0 ... 0.8 V | |
Output | ||
Output type | PWM output (PNP) , not short-circuit protected | |
Resolution | pulse length 10 µs /cm | |
Output current | max. 10 mA | |
Temperature influence | 3 % of full-scale value over the entire temperature range | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection. |
|
Approvals and certificates | ||
UL approval | UL Recognized , General purpose , Class 2 power source | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug | |
Degree of protection | IP67 | |
Material | ||
Housing | PBT | |
Transducer | epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated | |
Connector | ||
Threading | M12 x 1 | |
Number of pins | 5 | |
Mass | 115 g | |
Dimensions | ||
Height | 54 mm | |
Width | 50 mm | |
Length | 50 mm | |
Factory settings | ||
Default setting | Temperature compensation Address setting 7 |
|
Beam width | wide | |
General information | ||
Scope of delivery | 2 nuts plastic |
System | Classcode |
---|---|
ECLASS 13.0 | 27272803 |
ECLASS 12.0 | 27272803 |
ECLASS 11.0 | 27272803 |
ECLASS 10.0.1 | 27272803 |
ECLASS 9.0 | 27272803 |
ECLASS 8.0 | 27272803 |
ECLASS 5.1 | 27272803 |
ETIM 9.0 | EC001849 |
ETIM 8.0 | EC001849 |
ETIM 7.0 | EC001849 |
ETIM 6.0 | EC001849 |
ETIM 5.0 | EC001849 |
UNSPSC 12.1 | 41111960 |
CAD | Taal | Bestandstype | Bestandsgrootte |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 2654 KB |
Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
---|---|---|---|---|
Canada USA UL Ordinary Location | UL-US-2230246-0 / UL-CA-2229610-0 | ALL | 547 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-7700 | ALL | 36 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F) | DOC-7701 | ALL | 34 KB |