AS-Interface safety module VBA-4E2A1A-KE3-ZEL/E2L/SEL
- Safety output module with diagnostic node and I/O node
- 1 enabling circuit with 2 safe electronic outputs
- Assigns a complete address and two A/B addresses
- 1st A/B address: 3 standard inputs and 1 EDM input (I/O node)
- 2nd A/B address: diagnostics and operational switching of the safe outputs (diagnostic node)
- Applications up to category 4/PL e/SIL 3
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens VBA-4E2A1A-KE3-ZEL/E2L/SEL
| Productbeschrijving |
|---|
| KE3 switch cabinet module, 1 safety-related electronic output, 4 standard inputs, 2 standard outputs |
| General specifications | ||
|---|---|---|
| Node type | A/B node, standard node | |
| AS-Interface specification | V3.0 | |
| Required gateway specification | ≥ V2.1 | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Performance level (PL) | PL e | |
| Mission Time (TM) | 20 a | |
| PFHd | 1.91 E-9 | |
| PFD | 5.94 E-7 | |
| Indicators/operating means | ||
| LED FAULT | error display; LED red red: communication error |
|
| LED PWR | AS-Interface voltage; LED green | |
| LED IN | switching state (input); 4 LED yellow | |
| LED OUT | For flashing patterns see diagnostics table | |
| Electrical specifications | ||
| Auxiliary voltage (input) | 24 V ± 20 % PELV | |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface | |
| Rated operating current | < 200 mA | |
| Protection class | III | |
| Surge protection | UEXT, Ue: Over voltage category III, safe isolated power supplies (PELV) | |
| Input | ||
| Number/Type | 3 standard inputs, 1 EDM input | |
| Supply | from external auxiliary voltage UAUX | |
| Voltage | 24 V DC | |
| Input current | Static switching current: 4 mA at 24 V. Dynamic switching current: 15 mA at 24 V (T=100 μs) | |
| Sensor supply | ≤ 100 mA | |
| Output | ||
| Number/Type | 2 output switch elements Max contact load: 0.5 A DC-13 at 30 V 1 safe electronic output |
|
| Supply | from external auxiliary voltage UAUX | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2005/AC:2005 EN 61000-6-3:2007/A1:2011 |
|
| Standard conformity | ||
| Electromagnetic compatibility | EN 61326-3-1:2008 | |
| Degree of protection | EN 60529:2000 | |
| Electrical safety | EN ISO 13849-1:2008 EN ISO 13849-2:2012 | |
| Emitted interference | EN 61000-6-3:2007/A1:2011 | |
| AS-Interface | EN 62026-2:2013 | |
| Noise immunity | EN 61000-6-2:2005/AC:2005 EN 62026-2:2013 | |
| Functional safety | IEC 61508:2010 (SIL3) EN 62061:2005 | |
| Programming instructions | ||
| Profile | Diagnostic node: S-7.A.E, ID1 = 5 Input node: S-7.A.E, ID1 = 7 |
|
| IO code | 7 | |
| ID code | F | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | removable terminals rated connection capacity: rigid/flexible (with and without wire-end ferrules): 0.25 mm2 ... 2.5 mm2 for multiple-wire connection with two wires of equal cross-section: flexible with twin wire-end ferrules: 0.5 mm2 ... 1.5 mm2 |
|
| Material | ||
| Housing | PA 66-FR | |
| Dimensions | ||
| Height | 99 mm | |
| Width | 22.5 mm | |
| Length | 107 mm | |
| Mounting | DIN mounting rail | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272603 |
| ECLASS 12.0 | 27242604 |
| ECLASS 11.0 | 27242604 |
| ECLASS 10.0.1 | 27242604 |
| ECLASS 9.0 | 27242604 |
| ECLASS 8.0 | 27242604 |
| ECLASS 5.1 | 27242604 |
| ETIM 9.0 | EC001599 |
| ETIM 8.0 | EC001599 |
| ETIM 7.0 | EC001599 |
| ETIM 6.0 | EC001599 |
| ETIM 5.0 | EC001599 |
| UNSPSC 12.1 | 39121535 |
Details: VBA-4E2A1A-KE3-ZEL/E2L/SEL
Product Documentation: VBA-4E2A1A-KE3-ZEL/E2L/SEL
| Brief Instructions | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Mounting Instruction VBA-4E2A1A-KE3-ZEL/E2L/SEL / Montageanleitung VBA-4E2A1A-KE3-ZEL/E2L/SEL | ALL | 1394 KB | |
| Safety and Security Documentation | |||
| Instruction Manual VBA-4E2A1A-KE3-ZEL/E2L/SEL / Betriebsanleitung VBA-4E2A1A-KE3-ZEL/E2L/SEL | ALL | 443 KB | |
| Manuals | |||
| Manual VBA-4E2A1A-KE3-ZEL/E2L/SEL | ENG | 3543 KB | |
Design / Simulation: VBA-4E2A1A-KE3-ZEL/E2L/SEL
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 4525 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 1058 KB |
Approvals: VBA-4E2A1A-KE3-ZEL/E2L/SEL
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| US CA UL | E223772 | ALL | LINK | --- |
Software: VBA-4E2A1A-KE3-ZEL/E2L/SEL
| Software Tools | Vrijgave-informatie | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| SISTEMA SLB Library AS-Interface Safety / SISTEMA SLB Library AS-Interface Safety | ZIP | 622 KB |
Aanverwante producten: VBA-4E2A1A-KE3-ZEL/E2L/SEL
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
+31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
+31 73 75 07 108
© 2024 Alle rechten voorbehouden.
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.