| General specifications |
| Detection type | photoelectric sampling |
| Device type | Multiturn absolute rotary encoder |
| Indicators/operating means |
| LED green | supply voltage/preset key pressed |
| LED red | internal diagnostic test failed |
| Electrical specifications |
| Operating voltage | 4.5 ... 30 V DC |
| Power consumption | ≤ 1 W |
| Time delay before availability | < 250 ms |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit |
| Output code | Gray code, binary code |
| Code course (counting direction) | cw descending (clockwise rotation, code course descending) |
| Interface |
| Interface type | SSI |
| Monoflop time | 20 ± 10 µs |
| Resolution | |
| Single turn | up to 16 Bit |
| Multiturn | 14 Bit |
| Overall resolution | up to 30 Bit |
| Transfer rate | 0.1 ... 2 MBit/s |
| Voltage drop | UB - 2.5 V |
| Standard conformity | RS 422 |
| Input 1 |
| Input type | Selection of counting direction (cw/ccw) |
| Signal voltage | |
| High | 4.5 ... 30 V or open input (cw ascending) |
| Low | 0 ... 1 V (cw descending) |
| Input current | < 6 mA |
| Switch-on delay | < 10 ms |
| Input 2 |
| Input type | zero-set (PRESET 1) |
| Signal voltage | |
| High | 4.5 ... 30 V |
| Low | 0 ... 1 V or open input |
| Input current | < 6 mA |
| Signal duration | min. 100 ms |
| Switch-on delay | < 10 ms after falling input flank |
| Connection |
| Connector | type 9416 (M23), 12-pin, type 9416L (M23), 12-pin |
| Cable | ∅7 mm, 6 x 2 x 0.14 mm2, 1 m |
| Standard conformity |
| Degree of protection | DIN EN 60529, IP65 (without shaft seal) ; DIN EN 60529, IP66/IP67 (with shaft seal) |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation |
| Emitted interference | DIN EN 61000-6-4 |
| Noise immunity | DIN EN 61000-6-2 |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms |
| Vibration resistance | DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| Ambient conditions |
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Material | |
| Combination 1 | housing: powder coated aluminum
flange: aluminum
shaft: stainless steel |
| Combination 2 (Inox) | housing: stainless steel
flange: stainless steel
shaft: stainless steel |
| Mass | approx. 460 g (combination 1)
approx. 800 g (combination 2) |
| Rotational speed | max. 12000 min -1 |
| Moment of inertia | ≤ 30 gcm2 |
| Starting torque | < 3 Ncm (version without shaft seal) |
| Shaft load | |
| Angle offset | ± 0.9 ° |
| Axial offset | static: ± 0.3 mm, dynamic: ± 0.1 mm |
| Radial offset | static: ± 0.5 mm, dynamic: ± 0.2 mm |
| Dimensions | |
| Length | 73 mm |
+31 73 75 07 107