Surge Protection Barrier M-LB-2142.SP
- Surge protection barrier for 2 signal lines
- Nominal voltage 24 V DC
- Surge protection barrier for non-grounded signal lines
- Max. surge current (8/20 µs) 20 kA
- Connection via spring terminals with push-in connection technology
- DIN rail mountable
- Up to SIL 3 acc. to IEC/EN 61508
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens M-LB-2142.SP
| General specifications | ||
|---|---|---|
| Number of protected signal lines | 2 | |
| Topology | non-grounded | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Electrical specifications | ||
| Connection | protected area: terminals 4, 5 unprotected area: terminals 2, 3 shielding/grounding: terminal 1 (optional) |
|
| Rated current | 500 mA , restrictions see derating tables UL : 400 mA , restrictions see derating tables |
|
| Leakage current | < 3 µA at 24 V and 25 °C (77 °F) , line-line | |
| Nominal voltage | 24 V DC | |
| Maximum continuous operating voltage | 30 V DC | |
| Series resistance | ≤ 3 Ω per line | |
| Impulse rating | 1 kV/0.5 kA (category C1) 10 kV/5 kA (category C2) 1 kA (category D1) |
|
| Impulse discharge current (10/350 µs) | 1 kA per line (2x) | |
| Nominal discharge current (8/20 µs) | 5 kA per line (10x) | |
| Total discharge current (8/20 µs) | 20 kA (1x) , overstressed fault mode 3 acc. to IEC 61643-21 | |
| Voltage protection level | max. 45 V line-line for nominal discharge current In max. 1400 V line-earth for nominal discharge current In |
|
| Impulse reset time | < 500 ms | |
| Insertion loss | ≤ 3 dB at 0 ... 900 kHz in 100 Ω system | |
| Conformity | ||
| Electromagnetic compatibility | EN 61326-3-1:2017 | |
| Degree of protection | IEC 60529:2013 | |
| Functional safety | IEC/EN 61508:2010 | |
| Surge protective devices for low voltage | IEC 61643-21:2000+A1:2008+A2:2012 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) Observe the temperature range limited by derating, see section derating. |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | max. 95 % , without condensation | |
| Corrosion resistance | acc. to ISA-S71.04, severity level G3 | |
| Mechanical specifications | ||
| Degree of protection | IP20 , after mounting of the insulation spacer | |
| Connection | spring terminals , max. core cross section 1 x 2.5 mm2 | |
| Material | Polyamide (PA) | |
| Mass | approx. 32 g | |
| Dimensions | 6.2 x 93 x 72.4 mm (0.24 x 3.7 x 2.8 inch) (W x H x D) | |
| Height | 93 mm | |
| Width | 6.2 mm | |
| Depth | 72.4 mm | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| Certificate | KIWA 19 ATEX 0002 X | |
| Marking |  II 3G Ex ec IIC T6...T4 Gc |
|
| Temperature class | T6, T5 or T4 , restrictions see derating tables | |
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 | |
| International approvals | ||
| UL approval | E501704 E501881 |
|
| Breakdown voltage | 30 ... 45 V line-line at 100 V/s acc. to UL 497B < 1000 V at 100 V/µs acc. to UL 497B |
|
| IECEx approval | ||
| IECEx certificate | IECEx KIWA 19.0002X | |
| IECEx marking | Ex ec IIC T6...T4 Gc | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27171202 |
| ECLASS 12.0 | 27171202 |
| ECLASS 11.0 | 27130805 |
| ECLASS 10.0.1 | 27130805 |
| ECLASS 9.0 | 27130805 |
| ECLASS 8.0 | 27130805 |
| ECLASS 5.1 | 27130801 |
| ETIM 9.0 | EC000941 |
| ETIM 8.0 | EC000941 |
| ETIM 7.0 | EC000941 |
| ETIM 6.0 | EC000941 |
| ETIM 5.0 | EC000941 |
| UNSPSC 12.1 | 39121610 |
Details: M-LB-2142.SP
Product Documentation: M-LB-2142.SP
| Safety and Security Documentation | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Handleiding | HOL | 163 KB | |
| Functional Safety Manual | ENG | 602 KB | |
| Manuals | |||
| Manual | ENG | 3280 KB | |
Design / Simulation: M-LB-2142.SP
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2840 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 138 KB |
| EPLAN macro P+F.M-LB-2142.SP.edz with accessories / EPLAN-Makro P+F.M-LB-2142.SP mit Zubehör | ALL | EDZ | 198 KB |
Approvals: M-LB-2142.SP
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Canada, USA UL Hazardous Location | CoC 20211011 - E501881 RepRef 20210517 | ALL | 421 KB | |
| China SITIIAS CCC Ex Certificate | 2020322304002905 (Singapore) | ALL | 1097 KB | |
| Europe KIWA ATEX Category 3 G | KIWA 19 ATEX 0002 X | ALL | 90 KB | |
| India PESO (India) CCOE | A/P/HQ/KA/104/6096 (P579052) | ALL | 106 KB | |
| Worldwide CSA IECEx Certificate of Conformity | IECEx KIWA 19.0002X | ALL | LINK | --- |
| Worldwide ÖVE (Austria) Surge Protective Device | AT 4406 | ALL | 352 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) | TDOC-4286CHOL | HOL | 182 KB | |
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Honderden producten met een SIL-/ PL-classificatie, gratis tools en brochures in één locatie: de "Functional Safety Hub" is uw startpunt voor al uw veiligheidsfuncties.
Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
+31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
+31 73 75 07 108
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.