Serviceline Industriële Sensoren
Vraag aan een expert
Serviceline Explosiebeveiliging
Vraag aan een expert
Industriële sensoren

RFID evaluation unit IC-KP2-2HB21-2V1D

IC-KP2-2HB21-2V1D
  • LED status indicator of bus communication and read/write heads
  • Max. 2 read/write heads can be connected
  • Alternatively 1 read/write head and 1 trigger sensor can be connected

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:


Technische gegevens  IC-KP2-2HB21-2V1D

Productbeschrijving
IDENTControl Compact RFID evaluation unit with EtherCAT interface
General specifications
Number of read/write headsmax. 2
alternatively 1 read/write head and 1 trigger sensor
UL File NumberE87056
MTBF80 a (Operation at +40 °C)
Indicators/operating means
LEDs 1, 2Status indicator for read/write heads
green: command at read/write head active
yellow: approx. 1 second long, if command was successfully executed
LEDs CH1, CH2green: read head detected
red: Configuration error
LED PWR/ERRgreen: power on
red: Hardware fault
LED RUNOff: init
Flashing (green): pre-operational
Single flash (green): safe-operational
On (green): operational
Electrical specifications
Rated operating voltage20 ... 30 V DC , PELV
Ripple≤ 10 % at 30 V DC
Current consumption≤ 4 A incl. read/write heads
Power consumption3.5 W Without read/write heads
Galvanic isolationbasic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff
Interface 1
Interface typeEtherCAT (IN)
Physical Ethernet
ProtocolEtherCAT®
Transfer rate100 MBit/s
Interface 2
Interface typeEtherCAT (OUT)
Physical Ethernet
ProtocolEtherCAT®
Transfer rate100 MBit/s
Interface 3
Interface typeDiagnostic Interface
Physical RS 232
ProtocolASCII
Transfer rate38.4 kBit/s
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61000-6-2
EN 61000-6-4
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000
Standard conformity
Degree of protectionIEC 60529
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Climatic conditionsair humidity max. 96 %
Salt spray resistant to EN 60068-2-52
Shock and impact resistanceOscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6
Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27
Mechanical specifications
Degree of protectionIP67
ConnectionRead/write heads: shielded, 4-pin, M12 connector
Power supply: M12 connector
Protective earth: M4 earthing screw
Diagnostic RS 232: M8 connector
EtherCAT: M12 connector, D-coded
Material
Housingpowder coated aluminum
Installationscrew fixing
Massapprox. 300 g
Dimensions
Height42 mm
Width62 mm
Length142 mm

Classifications

SystemClasscode
ECLASS 13.027280401
ECLASS 12.027280401
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 9.0EC002998
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

Details: IC-KP2-2HB21-2V1D

Informative Literature: IC-KP2-2HB21-2V1D

Taalkeuze:
LiteratureTaalBestandstypeBestandsgrootte
Application Report - RFID Systems in Industrial Metal StampingENGPDF1773 KB
Application Report - Safe Assignment of Workpiece and ToolENGPDF204 KB

Product Documentation: IC-KP2-2HB21-2V1D

Taalkeuze:
Brief InstructionsTaalBestandstypeBestandsgrootte
Brief Instructions - IC-KP2-*ENGPDF2285 KB
Manuals
Manual IC-KP2-2HB21-2V1DENGPDF2033 KB
Manual Read / Write Ranges and Passing Speeds RFIDENGPDF3640 KB

Design / Simulation: IC-KP2-2HB21-2V1D

Taalkeuze:
CADTaalBestandstypeBestandsgrootte
CAD 3-D / CAD 3-DALLSTP1833 KB
CAD Portal / CAD PortalALLLINK---

Approvals: IC-KP2-2HB21-2V1D

Taalkeuze:
CertificatesCertificaatnummerTaalBestandstypeBestandsgrootte
Canada, USA ULCoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0ALLPDF561 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0687EALLPDF111 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6844ALLPDF108 KB

Aanverwante producten: IC-KP2-2HB21-2V1D

Accessory of

HF RFID read/write device, ISO 15693, for IDENTControlfa

HF RFID read/write device, ISO 15693, for IDENTControlfa

HF RFID read/write device, ISO 15693, for IDENTControlfa

LF RFID read/write device for IDENTControlfa

LF RFID read/write device for IDENTControlfa

LF RFID read/write device for IDENTControlfa

LF RFID read/write device for IDENTControlfa

LF RFID read/write device for IDENTControlfa

UHF RFID read/write device for IDENTControl, Europefa
UHF read/write head for hazardous areas, for IDENTControl, Canada, USA, and Mexicofa
HF RFID read/write device, ISO 15693, for IDENTControlfa
HF RFID read/write device, ISO 15693, for IDENTControlfa
HF RFID read/write device, ISO 15693, for IDENTControlfa
LF RFID read/write device for IDENTControlfa
LF RFID read/write device for IDENTControlfa
LF RFID read/write device for IDENTControlfa
LF RFID read/write device for IDENTControlfa
HF RFID read/write device for hazardous areas, ISO 15693, for IDENTControlfa
LF RFID read/write device for IDENTControlfa
LF RFID read/write device for IDENTControl, for hazardous areasfa
HF RFID read/write device for hazardous areas, ISO 15693, for IDENTControlfa
UHF RFID read/write device for IDENTControl, Europe, hazardous areasfa
UHF RFID read/write device for IDENTControl, Indiafa
UHF RFID read/write device for IDENTControl, Singaporefa
UHF RFID read/write device for IDENTControl, Moroccofa
UHF RFID read/write device for IDENTControl, USA, Canada and Argentinafa
UHF RFID read/write device for IDENTControl, Chinafa
UHF RFID read/write device for IDENTControl, Brazilfa
UHF RFID read/write device for IDENTControl, Japanfa
UHF RFID read/write device for IDENTControl, Australiafa
UHF RFID read/write device for IDENTControl, Thailand and Hong Kongfa
UHF RFID read/write device for IDENTControl, Malaysiafa
UHF RFID read/write device for IDENTControl, Singaporefa
UHF RFID read/write device for IDENTControl, Indonesiafa
UHF RFID read/write device for IDENTControl, Europe, Middle East and Africfa
UHF RFID read/write device for IDENTControlfa
UHF RFID read/write device for IDENTControl, USA, Canada and Argentinafa
LF read/write head, for IDENTControl, for hazardous areasfa
HF read/write head, ISO 15693, for IDENTControl, hazardous areasfa
HF RFID read/write device, ISO 15693, for IDENTControlfa
Accessories

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa

Female connector M12 straight A-coded 4-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

Male connector M12 straight A-coded 4-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable grey, shieldedfa
Mounting aid for DIN railfa
Adapter cable M8 plug straight A-coded 3-pin to Sub-D-plug straight 9-pin, PUR cable grey, shielded, for PC connection with null modem cablefa
Algemene opmerkingen met betrekking tot de informatie in de Pepperl+Fuchs productdocumentatie

Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
phone +31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
phone +31 73 75 07 108

© 2024 Alle rechten voorbehouden.

Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.