Switch Amplifier KFA6-SR-2.3L.FA
- 2-channel
- 115/230 V AC supply
- 3-wire PNP/NPN sensor or push-pull input
- Relay contact output
- DIP switch selectable functions
- Minimum/maximum control
- Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for KFA6-SR-2.3L.FA
| General specifications | ||
|---|---|---|
| Signal type | Digital Input | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Supply | ||
| Connection | terminals 14, 15 | |
| Rated voltage | 90 ... 253 V AC , 45 ... 65 Hz | |
| Rated current | ≤ 150 mA | |
| Power dissipation | 2.5 W | |
| Power consumption | max. 7 W | |
| Input | ||
| Connection side | field side | |
| Connection | Input I: terminals 1+, 2, 3-; Input II: terminals 4+, 5, 6- | |
| Rated values | 22 ... 24 V DC / 100 mA, see notes | |
| NPN sensor | ||
| Switching point | 4 ... 13 V | |
| PNP sensor | ||
| Switching point | 4 ... 13 V | |
| Short-circuit current | 110 mA | |
| Switching point | 0-signal: < 5 V 1-signal: > 13 V |
|
| Output | ||
| Connection side | control side | |
| Connection | output I: terminals 7, 8, 9 output II: terminals 10, 11, 12 |
|
| Output I, II | ||
| Contact loading | 250 V AC / 4 A / cos φ > 0.7; 40 V DC / 2 A resistive load | |
| Energized/De-energized delay | max. 6 ms | |
| Mechanical life | 107 switching cycles | |
| Transfer characteristics | ||
| Switching frequency | ≤ 10 Hz | |
| Galvanic isolation | ||
| Input/Output | safe galvanic isolation per EN 50178, voltage peak value 253 V | |
| Input/power supply | safe galvanic isolation per EN 50178, voltage peak value 253 V | |
| Output/power supply | safe galvanic isolation per EN 50178, voltage peak value 253 V | |
| Output/Output | basic insulation acc. to EN 50178, rated insulation voltage 253 Veff | |
| Indicators/settings | ||
| Display elements | LEDs | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2004/108/EC | EN 61326-1:2006 | |
| Low voltage | ||
| Directive 2006/95/EC | EN 50178:1997 | |
| Conformity | ||
| Galvanic isolation | EN 50178 | |
| Electromagnetic compatibility | NE 21 | |
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 150 g | |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 | |
| Height | 118 mm | |
| Width | 20 mm | |
| Depth | 115 mm | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210121 |
| ECLASS 12.0 | 27210121 |
| ECLASS 11.0 | 27210121 |
| ECLASS 10.0.1 | 27210121 |
| ECLASS 9.0 | 27210121 |
| ECLASS 8.0 | 27210121 |
| ECLASS 5.1 | 27210121 |
| ETIM 9.0 | EC001485 |
| ETIM 8.0 | EC001485 |
| ETIM 7.0 | EC001485 |
| ETIM 6.0 | EC001485 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 32101514 |
Details: KFA6-SR-2.3L.FA
Function
This signal conditioner provides the galvanic isolation between field circuits and control circuits.
The device transfers the status of 2-wire and 3-wire sensors to the relay contact output.
The device has 2 inputs and 2 relay contact outputs.
The device can be used either as dual channel signal conditioner or as a two-point level controller.
The device is easily configured by the use of DIP switches.
A fault is signalized by LEDs.
Informative Literature: KFA6-SR-2.3L.FA
| Literature | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage | ENG | 566 KB | |
| Application Report - Generating Electricity in Coal-Fired Power Plants | ENG | 412 KB | |
| Application Report - Sand Trap and Preliminary Sedimentation Stage | ENG | 448 KB | |
| Application Report - Screening Systems in Sewage Treatment Plants | ENG | 577 KB |
Product Documentation: KFA6-SR-2.3L.FA
| Safety and Security Documentation | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Instruction manual | ENG | 41 KB | |
| Manuals | |||
| System Manual | ENG | 3694 KB | |
Design / Simulation: KFA6-SR-2.3L.FA
| CAD | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2510 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 1506 KB |
Approvals: KFA6-SR-2.3L.FA
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| exida Functional Safety Assessment | P+F 05/12-35 R026 | ALL | 216 KB |
Relaterte produkter: KFA6-SR-2.3L.FA
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.