Vibration sensor VIM82PL-S1V16-22E-I422V19
- Suitable for SIL2/Pld applications
- Rugged stainless steel housing
- Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
- Suitable for use in harzadous area up to Zone 2/21 with type of protection increased safety and for Class I/II and Division 2
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of VIM82PL-S1V16-22E-I422V19
| Product Description |
|---|
| Vibration sensor with safety function both for the analog current output and for the 2 relay outputs with adjustable swichting thresholds |
| General specifications | ||
|---|---|---|
| Type | Vibration sensor | |
| Measuring technology | MEMS | |
| Series | Performance Line | |
| Measured variable | Vibration velocity | |
| Measuring range | ||
| Vibration velocity | 0 ... 16 mm/s | |
| Measurement accuracy | ± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s |
|
| Cross-sensitivity | < 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis | |
| Frequency range | 10 ... 1000 Hz | |
| Averaging time | for v-rms: 2 s | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Performance level (PL) | PL d | |
| Category | Cat. 2 | |
| MTTFd | 329 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | min. 90 % | |
| Indicators/operating means | ||
| Status indicator | 6 LEDs for operating states | |
| Control elements | 4 rotary switches and 1 push button for programming | |
| Electrical specifications | ||
| Fusing | external fuse is required: 3 A , semi-time-lag , 30 V DC | |
| Operating voltage | 24 V DC + 7 % / - 10 % | |
| Current consumption | max. 100 mA | |
| Power consumption | 2.6 W | |
| Time delay before availability | 15 s (initially self-test functions are executed before safe measured values are available at the output) | |
| Surge protection | up to 2 kV | |
| Output 1 | ||
| Output type | relay | |
| Switching function | Normally open (NO) | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 1 A | |
| Output 2 | ||
| Output type | relay | |
| Switching function | Normally open (NO) | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 1 A | |
| Output 3 | ||
| Output type | analog output, current output of the vibration variable |
|
| Output current | 4 ... 20 mA | |
| Load resistor | ≤ 500 Ω | |
| Standard conformity | ||
| Degree of protection | DIN EN 60529, IP66, IP67 | |
| Shock resistance | DIN EN 60068-2-27, 60 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz | |
| Vibration evaluation | DIN ISO 10816/20816 | |
| Functional safety | DIN EN IEC 61508 , SIL 2 EN ISO 13849 , PL d |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Gc | IECEx ULD 22.0031X | |
| Equipment protection level Dc | IECEx ULD 22.0031X | |
| ATEX approval | ||
| Equipment protection level Gc | UL 22 ATEX 2870 X | |
| Equipment protection level Dc | UL 22 ATEX 2870 X | |
| UL approval | ||
| Ordinary Location | E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request |
|
| Hazardous Location | E106378 | |
| Maximum permissible ambient temperature | max. 60 °C (max. 140 °F) | |
| Control drawing | 116-0493 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Measuring head temperature | -40 ... 85 °C (-40 ... 185 °F) directly at the mounting point | |
| Storage temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Mechanical specifications | ||
| Connection type | plug | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Degree of protection | IP66 / IP67 only in connected state and correctly mounted housing cover | |
| Connector | ||
| Threading | M12 | |
| Number of pins | 8 | |
| Mass | approx. 500 g | |
| Dimensions | ||
| Height | 46 mm | |
| Width | 62 mm | |
| Length | 73.5 mm | |
| General information | ||
| Scope of delivery | 1 x allen head screw M8 x 20 1 x spring washer M8 1 x seal label |
|
| Use in the hazardous area | see instruction manuals Only use accessories specified by the manufacturer. |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27271103 |
| ECLASS 12.0 | 27201406 |
| ECLASS 11.0 | 27201406 |
| ECLASS 10.0.1 | 27201406 |
| ECLASS 9.0 | 27201406 |
| ECLASS 8.0 | 27201406 |
| ECLASS 5.1 | 27201406 |
| ETIM 9.0 | EC004309 |
| ETIM 8.0 | EC004309 |
| ETIM 7.0 | EC002959 |
| ETIM 6.0 | EC002959 |
| ETIM 5.0 | EC001758 |
| UNSPSC 12.1 | 41114624 |
Details: VIM82PL-S1V16-22E-I422V19
Function
The vibration sensor determines the vibration quantity using rms (root mean square) averaging. This form of quadratic averaging or pre-filtering enables precise trend statements about the condition of the application.
The vibration sensor has a safety integrity level (SIL 2) for usage in functional safety applications.
For monitoring tasks within the scope of functional safety, 2 relay outputs with adjustable switching thresholds are available. With simultaneous evaluation of both relay outputs by a controller, monitoring of a pre-alarm and main alarm thus is possible, e.g. as part of Condition Monitoring.
Furthermore there is an approval for the use of the sensor in hazardous areas.
Informative Literature: VIM82PL-S1V16-22E-I422V19
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Product Overview - Vibration Sensors | ENG | 1351 KB |
Product Documentation: VIM82PL-S1V16-22E-I422V19
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 240 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 160 KB | |
| Manual | ENG | 1955 KB | |
| Manuals | |||
| Manual VIM8* Vibration Sensors | ENG | 2780 KB | |
Design / Simulation: VIM82PL-S1V16-22E-I422V19
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2221 KB |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 126 KB |
Approvals: VIM82PL-S1V16-22E-I422V19
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada, USA UL Hazardous Location | E106378 | ALL | 442 KB | |
| Europe UL II 3 GD ATEX Category 3 | UL 22 ATEX 2870 X | ALL | 190 KB | |
| Worldwide IECEx Certificate of Conformity | IECEx ULD 22.0031X | ALL | LINK | --- |
| Worldwide TÜV SÜD Functional Safety Certificate | Z10 020068 0096 | ALL | 298 KB | |
| Control Drawings | ||||
| Control drawing UL / Control drawing UL | ALL | 146 KB | ||
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-6854 | ALL | 333 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6855 | ALL | 327 KB | |
Associated Products: VIM82PL-S1V16-22E-I422V19
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs Asia Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Singapore
sales@sg.pepperl-fuchs.com
+65 6779 9091
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.